 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
CTS Pot curves
I lost the original post. If the person who posted on this will sent me
their snail mail address i will send them a copy of the curves. C11 is a linear taper with a slight flat at 50%. Chuck P. |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
CTS Pot curves
On Jan 27, 9:55 pm, Pilgrim wrote: I lost the original post. If the person who posted on this will sent me their snail mail address i will send them a copy of the curves. C11 is a linear taper with a slight flat at 50%. Chuck P. I have it now. Hit up a buddy of mine I used to work with and he found it in an old IRC/Tresco catalog and email'd it to me. |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| CTS pot taper chart? | Electronics Repair | |||
| Cutting curves: | Woodworking | |||
| curves | Woodworking | |||
| Jet CTS (contractor's table saw) | Woodworking | |||
| laying out curves | Woodworking | |||
Linear Mode
