Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
52" RCA Projo. T.V.
Thanks guys for the input, but I can find no bad connections even with
a powerfull magnifying glass. RCA 52" Projo T.V., Model # P52937SG, Chassis # CTC 195M4, dead, 2SC5148 horizontal output shorted, all else ok, replaced...works fine, nice pix, convergence was fine, tap main board....pop goes the output! Found no bad connections, & soldered the horiz drive area before putting power to the unit. Q14301 driver looked overheated, but checks fine. Anyone see this type of unseen bad connection? The board looks fine, no leaks, & the convergence power supply looks fine. Thanks, Dani. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
46" RCA projo model:P46729BADX1,chassis:PTK169PCA | Electronics Repair | |||
CTC169JA2 projo vertical line through center of screen. | Electronics Repair | |||
Mitsubishi VS-4003R ProJo Dead Set Issue | Electronics Repair | |||
mitsu-vs-5020r projo no picture | Electronics Repair | |||
Pioneer SD-P55A3-K projo, I think you're right Jammy @ ampdoc | Electronics Repair |