 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
| Reply |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
viewsonic p815 monitor keeps randomly resetting
Monitor keeps resetting, with relay clicking sound. Occurs randomly,
especially upon powering up. Get degaussing at same time. Sometimes it works okay for an hour, then a random reset. Is there a relay going bad, and can it be replaced, or are there other underlying problems? Changing resolution and refresh rate do not make any difference. The picture is great while using. -- Steve Walker (remove wallet to reply) |
|
#2
Posted to sci.electronics.repair
|
|||
|
|||
|
viewsonic p815 monitor keeps randomly resetting
Sounds like cracked solderings, check all transistors and parts that get hot
for circles in the solder. Had it MANY times. Bart Bervoets "Steve Walker" wrote in message news:XkCvg.14033$rT6.9875@trnddc03... Monitor keeps resetting, with relay clicking sound. Occurs randomly, especially upon powering up. Get degaussing at same time. Sometimes it works okay for an hour, then a random reset. Is there a relay going bad, and can it be replaced, or are there other underlying problems? Changing resolution and refresh rate do not make any difference. The picture is great while using. -- Steve Walker (remove wallet to reply) |
| Reply |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| Adjust COnvergence on Viewsonic P815 CRT? | Electronics Repair | |||
| Viewsonic 21" P815 totally out of focus? | Electronics Repair | |||
| Troubleshooting a Viewsonic P815 Monitor | Electronics Repair | |||
| Viewsonic P815 power supply problem | Electronics Repair | |||
| Viewsonic P815 Intermittent off/on | Electronics Repair | |||
Linear Mode
