Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Convergence problem on Sony KP43T75
I have a Sony KP43T75 that appears to have a convergence problem. On another forum I was told I need to replace the convergence STK's. I thought I knew which parts I needed, but now I am not so sure. I thought I needed: http://www.partstore.com/ProductDeta...uctType= PART
But in reading a thread here I may only need: http://www.electronix.com/catalog/ad... 2-150&x=0&y=0 Is the first one for $75 the whole circuit board, and the second one for $10 just the single IC I need? Recommendations on which way I should go? BTW, I know there are two convergence STK's to deal with. Thanks for any help you can provide, Ed |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toshiba Rear Projection Convergence board problem | Electronics Repair | |||
Convergence Problem - Mitsubishi 45" PTV Model # VS-45603 | Electronics Repair | |||
Mitsubishi 45" PTV Model # VS-45603 Chassis # VZ5 Convergence Problem | Electronics Repair | |||
Convergence board problem? Help please | Electronics Repair | |||
Sony G410R Monitor problem (and bad Sony support) | Electronics Repair |