Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Mitsubishi 45" PTV Model # VS-45603 Chassis # VZ5 Convergence Problem
Hello:
I have a Mitsubishi 45" PTV Model # VS-45603 Chassis # VZ5 in my shop which has a convergence problem. The convergence is off Horizontally and vertically in all areas of the raster for all colors. The customer menu convergence adjustments do not move the crosshairs in any direction for any color. I am not familiar with this chassis and don't have service data for it. I have data and experience on the VZ2 chassis. This VZ5 chassis uses 2 STK392-110 ICs mounted on a board on the left side (As viewed from the rear) of the plastic tray. The signal board is in the middle, and the deflection/PS board is on the right. I have a data sheet on the STK392-110s from Sanyo, but I don't knwo what the proper voltages are for the pins. What are the common causes of this problem? Also, I would appreciate a scan of the convergence schematics and powers supplies for the convergence circuitry. Thank You! Robert McPherson Louisville, KY (502) 367-9324 OR (502) 298-6997 |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
New update: Toshiba TN50X81 convergence problem. | Electronics Repair | |||
MItsubishi VS60609 No convergence correction | Electronics Repair | |||
Toshiba Projection TV Convergence Problem | Electronics Repair | |||
Part value needed, Mitsubishi Model CK-3514 TV | Electronics Repair | |||
Mitsubshi VS-5007 convergence problem | Electronics Repair |