Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
Please help with 2SC2331 identification
I've been given a broken Samsung TV, model TV-686ST. On the neck board is
a burnt transistor, QV07, a 2SC2331. The board is SCT12B. My problem is, the data sheets I find show the 2SC2331 as a 100V 2A TO-220 while my part is a TO-92MOD which drives a 2SC2344 and 2SA1011 pair. Should I go ahead and use the TO-220 and also what is the value of the emitter resistor? It looks like it was a 120 ohm 2 or more watts. Appreciate any help you can give. Gordon PS I've traced the cct and can post on abse if that would help. PPS I used to have a repair site that gave, model, fault, repair. Anyone know of one? |
#2
Posted to sci.electronics.repair
|
|||
|
|||
Please help with 2SC2331 identification
Gordon W wrote:
I've been given a broken Samsung TV, model TV-686ST. On the neck board is a burnt transistor, QV07, a 2SC2331. The board is SCT12B. My problem is, the data sheets I find show the 2SC2331 as a 100V 2A TO-220 while my part is a TO-92MOD which drives a 2SC2344 and 2SA1011 pair. Should I go ahead and use the TO-220 and also what is the value of the emitter resistor? It looks like it was a 120 ohm 2 or more watts. Appreciate any help you can give. Gordon PS I've traced the cct and can post on abse if that would help. PPS I used to have a repair site that gave, model, fault, repair. Anyone know of one? Undoubtably a KSC2331, a Korean type. If the specs match you're still OK, but the basing is opposite. Mark Z. |
#3
Posted to sci.electronics.repair
|
|||
|
|||
Please help with 2SC2331 identification
"Mark D. Zacharias" wrote in message . com... Gordon W wrote: I've been given a broken Samsung TV, model TV-686ST. On the neck board is a burnt transistor, QV07, a 2SC2331. The board is SCT12B. My problem is, the data sheets I find show the 2SC2331 as a 100V 2A TO-220 while my part is a TO-92MOD which drives a 2SC2344 and 2SA1011 pair. Should I go ahead and use the TO-220 and also what is the value of the emitter resistor? It looks like it was a 120 ohm 2 or more watts. Appreciate any help you can give. Gordon PS I've traced the cct and can post on abse if that would help. PPS I used to have a repair site that gave, model, fault, repair. Anyone know of one? Undoubtably a KSC2331, a Korean type. If the specs match you're still OK, but the basing is opposite. Mark Z. Thanks Mark. That should do the trick. Never thought of KSC. Tunnel vision ( Thanks again Gordon |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Transistor identification (and substitutes) available readily in UK | Electronics Repair | |||
Pipe identification for Potterton Puma 80 | UK diy | |||
Collet Identification | Metalworking | |||
Tool Identification | Home Repair | |||
Optical Linear Array Chip Identification - Old Scanner | Electronics |