I don't have the original remote for this TV and the universal doesn't
allow me to access the function menus. Originally, I was just trying to
program the channels into the TV. I found that when I press the
"function" and "volume down" buttons together, the screen shows the JVC
Master Command and the Feature Demonstration menus. Then it
automatically starts going through a demo by itself. Since it did this,
the clock display is now always on in the lower right hand corner. Is
there anything I can do to fix this withouth ordering a remote?

You may want to go to www.moteva.com and check up on the jvc remotes
they have there. Moteva remotes are very good and much cheaper than
the original remotes and will do all the funtions that a original
remote does. Much better buy than any universal remote that I have
seen on the market.

The I (info) button turns the clock on/off, so you need a remote with
that button on.


"tvguy" wrote in message
news
You may want to go to www.moteva.com and check up on the jvc remotes
they have there. Moteva remotes are very good and much cheaper than
the original remotes and will do all the funtions that a original
remote does. Much better buy than any universal remote that I have
seen on the market.