Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to sci.electronics.repair
|
|||
|
|||
JVC AV20cm3 clock display stuck
I don't have the original remote for this TV and the universal doesn't
allow me to access the function menus. Originally, I was just trying to program the channels into the TV. I found that when I press the "function" and "volume down" buttons together, the screen shows the JVC Master Command and the Feature Demonstration menus. Then it automatically starts going through a demo by itself. Since it did this, the clock display is now always on in the lower right hand corner. Is there anything I can do to fix this withouth ordering a remote? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Kenmore Range Electronic Panel Clock Display Needs Replacement | Home Repair | |||
Kenmore Range Electronic Panel Clock Display Needs Replacement | Home Repair | |||
AA battery clock conundrum | Electronics Repair | |||
fixeda Antique mantle clock | Metalworking |