I'm trying to help a friend repair an old 80's "Fun Chicken" vending
machine. If you are curious what this looks like, check out the
following pic:

http://randy.hobby-site.com/~rnewman...funchicken.jpg

Well I'm not sure what happend to this poor machine, but a bunch of the
components on the main circuit board are toast. I need to identify four
of these. Here is a pic of the board with the component locations:

http://randy.hobby-site.com/~rnewman...n-henboard.jpg

Any chance someone out there has one of these machines and could verify
these? A copy of the schematic would be even better!

I've been looking everywhere and so far no luck. Thanks a ton to anyone
who can help!

-Randy

wrote:
I'm trying to help a friend repair an old 80's "Fun Chicken" vending
machine. If you are curious what this looks like, check out the
following pic:

http://randy.hobby-site.com/~rnewman...funchicken.jpg

Well I'm not sure what happend to this poor machine, but a bunch of the
components on the main circuit board are toast. I need to identify four
of these. Here is a pic of the board with the component locations:

http://randy.hobby-site.com/~rnewman...n-henboard.jpg

Any chance someone out there has one of these machines and could verify
these? A copy of the schematic would be even better!

I've been looking everywhere and so far no luck. Thanks a ton to anyone
who can help!

-Randy



Hey I remember those! I haven't seen one of them in years though. What
exactly is the board supposed to do? It might be possible to make an
educated guess as to what the parts are, at least there aren't any
custom programmed microcontrollers or anything like that.

The part on the bottom-right looks like it might be a 3 terminal voltage
regulator, looking at how it connects to the rectifier diodes and main
filter cap will confirm or deny that. The one on the upper-left looks
like a power transistor, does the board drive a solenoid or motor?

wrote:

I'm trying to help a friend repair an old 80's "Fun Chicken" vending
machine. If you are curious what this looks like, check out the
following pic:

http://randy.hobby-site.com/~rnewman...funchicken.jpg

Well I'm not sure what happend to this poor machine, but a bunch of the
components on the main circuit board are toast. I need to identify four
of these. Here is a pic of the board with the component locations:

http://randy.hobby-site.com/~rnewman...n-henboard.jpg

Any chance someone out there has one of these machines and could verify
these? A copy of the schematic would be even better!

I've been looking everywhere and so far no luck. Thanks a ton to anyone
who can help!

-Randy


Hi Randy...

Man, brings back memories...

Used to have a little fried chicken store here (Winnipeg, Canada)
that had one of those! Restaurant had the name of my very very young
kid, so she sorta thought it was hers... we hadda go there.

Everytime we did, she *had* to put a quarter in the machine, I had to
turn the handle (she was to small). The chicken would shriek real real
loud and scary, and she'd be gone to the opposite wall!

Anyway, here's one.. sadly the auction closed, but maybe if you
get in touch with the winning bidder he might be willing to
help you out a bit? In case the page disappears, the winning
bidder is whatyalookinat.


http://cgi.ebay.ca/FUN-CHICKEN-VINTA...cmdZV iewItem

Take care.

Ken

Mr. Land wrote:
I'll bet the board is supposed to generate a very unrealistic,
electronic-sounding chicken clucking noise as the chicken in the
cabinet spins.

How would I know this? Because a chicken restaurant we frequent has
one, and it's still in use! Kids put in a quarter and get a toy in a
plastic egg. Worst rendition of a chicken I've ever heard - sounds
like someone's first day playing with their new synthesizer.



That board looks way too simple to be the sound generator, I would
expect there to be another board for that, it's been probably 2 decades
since I've used one of those machines but I do remember them from when I
was a little kid.

The board is labeled "Hen Assembly" "Movie Hut Inc". I don't have the
actual machine here, just the board. I'll have to go over to his shop
and see if I can figure out what it does.

-Randy

Hi Ken,
Its funny you mention that ebay auction, cause I actually emailed the
seller while the auction was going on and asked if he could check the
components for me. He unfortunately said that he couldn't see any
numbers on most of them, and I think the ones he did send me might be
wrong, since I couldn't cross reference them anywhere. Thanks for the
help though!

Right now I only have the board, not the whole machine. I'll have to go
over to his shop over the weekend and see if I can figure out what it
does. Thanks guys for all your help!

-Randy