 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to sci.electronics.repair
|
|||
|
|||
Need help with ctc169. High voltage at B+
TV will not power on. First disconnected red HV to splitter and tried
to power on. No luck. Next checked HOT for short, none found. Checked voltage at collector of hot. Voltage shot up to 220 volts and then trickled down to zero. The set does make a chirp sound when first plugged in followed by 7 to 10 clicks and then nothing else happens. Any ideas were to go from here? I would really appreciate any help. Are there any other checks I should make or start replacing c4103, cr4101 cr4106 cr4118 cr4108? Shallowrunner. |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| MR16 - low voltage or line voltage | Home Repair | |||
| Sony CPD-G400 monitor high voltage block | Electronics Repair | |||
| Effect of high household voltage on TV? | Electronics Repair | |||
| high voltage regulation in monitor | Electronics Repair | |||
| High voltage problem with JVC AV27BP4 TV | Electronics Repair | |||
Threaded Mode
