"T o d d P a t t i s t" wrote in message
...
A friend has a Nissan with a blower motor controlled by the
climate control that fails to full on. He's tracked it down
to a module that he's replaced twice for $130 (lasts for one
year). He's tired of that, and the suggested fix is to
replace the blower motor for $180 (plus the $130 module)!

The module has a massive heat sink, and a blown component
marked NEC K2500. We're guessing this is a NEC N-channel
MOSFET 2SK2500, but there's no such beast listed. OTOH,
there is a NEC 2SK2511 that will handle 40 amps and has the
same package, but we can't seem to find a supplier. (The
blower draws 10 Amps at 13.5 V.)

Two questions - Can anyone provide info on the K2500 and
confirm its specs or that a 2SK2511 would be a reasonable
sub, and where can we get one? Every supplier we've found
so far has wanted a $150 min order.

Here is a link to some info about that:

http://www.teccor.com/cgi-bin/r.cgi/...tfield= k2500


--
David Farber
David Farber's Service Center
L.A., CA