 |
|
| Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
|
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
GE Spectra Range Electronics display unit bad...
After a power surge, my oven electronics display doesn't light up and the
oven no longer works. The electronics package number is: WB27T10230 and the GE model No. is 191D2818P002. It looks like the PC board mounted power transformer (ETP41KAN41CA)primary is open (desoldered & tested with ohmmeter. The module is relatively expensive to replace. Would be nice to have a schematic showing the primary & secondary voltages. Anyone have any ideas about where to get an inexpensive module? I guess I could use an auto-transformer and apply an AC voltage to the secondary side; when the display lights up I could measure the value and then try to find a suitable stock transformer... Thanks in advance for any suggestions!! Don in sunny Florida |
| Thread Tools | Search this Thread |
| Display Modes | |
|
|
Similar Threads
|
||||
| Thread | Forum | |||
| For peer review, new FAQ section: Power Tools. Draft 2 | UK diy | |||
| Glass top (Radiant) Range surface unit replacement | Home Repair | |||
| Followup: York heat pump replacement - quote sounds high, thoughts? | Home Repair | |||
| wiring diagram for consumer unit | UK diy | |||
| F2 fault error on GE range - broiler element turns on | Home Repair | |||
Threaded Mode
