Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
x
 
Posts: n/a
Default bose acoustimass subwoofer repair

Anyone knows how to open a bose subwoofer that does not appear to have any
screws?


  #2   Report Post  
kip
 
Posts: n/a
Default

Chop saw...


"x" wrote in message
...
Anyone knows how to open a bose subwoofer that does not appear to have any
screws?



  #3   Report Post  
Arfa Daily
 
Posts: n/a
Default


"x" wrote in message
...
Anyone knows how to open a bose subwoofer that does not appear to have any
screws?

Two screws at the bottom. Then at the top, look in the gap between the
plastic and the wood to see a thin piece of plastic. This is a rotating '
snail cam '. Rotate it until it sticks up using a scalpel blade or similar.
Now turn the unit on its front with that cam towards you. Look carefully
again in the gap, and you will see two plastic latches. Again, using the
scalpel blade, push them slightly out of the way, whilst pushing the plastic
back away from you - ie towards the bottom wher you took out the two screws.
The back should then slide off.

If you still can't do it, mail me direct, and I'll do you a pdf of the
instructions in the manual, which don't say much other than what I have
said, but have a couple of ( not very good ) pictures.

What is the problem with the unit ?

Arfa


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Orangeburg pipe repair Larry Martell Home Repair 13 January 27th 17 07:43 PM
Refrigerator repair story with a happy ending ! wgd Home Repair 16 July 4th 05 07:40 PM
Question shet metal repair wallster Metalworking 2 May 20th 04 04:08 PM
Gouged on repair part by appliance repair company? DH in Denver Home Repair 14 December 15th 03 04:02 AM
Rolled Roofing Blowing Off Manufactured Home, Repair Expensive? AJ Home Ownership 5 July 9th 03 12:12 AM


All times are GMT +1. The time now is 06:11 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"