Hey Guys:
Repaired this 50" Pioneer. Everything stable now. However, we need to
make some minor adjustments in the Master Digital Convergence. Can't
seem to locate any info on how to access the service menu. Can anyone
advise us accordingly please?
T.I.A.
Jim

There is a hole you stick a paper clip in to get to it.

Warning: They have achieved the most user unfriendly system in the
world. The only close second is Panasonic. Convergence is not cursor
based (if the set is over about 7 years old) and the number keys do
other things, ansd there are also other key that do unexpected things.
I think Pioneers save on the fly, so be careful in there.

Make sure you have the factory original remote, lots of universals
won't "hit" it.

JURB

The pin hone is located in the center directly under the control
panel. To access it you need to remove the front grille.

I have the service manual in a pdf if you are interested. My tv is
having issues and I have never played with anything like this before.


1)the sides of the picture randomly bow in on all colors

2)the second issue just started and is consistantly bowed in on the
top and bottom on the blue only

can anyone point me in the right direction?

The pin hone is located in the center directly under the control
panel. To access it you need to remove the front grille.

I have the service manual in a pdf if you are interested. My tv is
having issues and I have never played with anything like this before.


1)the sides of the picture randomly bow in on all colors

2)the second issue just started and is consistantly bowed in on the
top and bottom on the blue only

can anyone point me in the right direction?

[quote=HardmanGT]
I have the service manual in a pdf if you are interested. My tv is
having issues and I have never played with anything like this before.
QUOTE]

Would you possibly still have this manual? my Tv keeps cutting off after 30 or so minutes and I can fix it i just need the manual to go by. Thanks in advance.