Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
Toshiba TV CF2662B, ch TAC9215, Change Factory Picture Setting
Hi,
Toshiba TV CF266B, ch TAC9215 (mfg 1992) Is there a way to change the factory set "contrast", which is set to maximum, to a lower setting? When I unplug the TV as a storm approaches, and later plug it in, the picture returns to the factory settings. I have three different universal remotes and none can access the picture settings. The original remote recently got damaged beyond repair, now I no longer can access the picture settings. Note: Adjustment for picture is not available at the front panel. Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. |
#2
|
|||
|
|||
You CAN adjust them from the front lower manual controls very easily.
kip "Brad" wrote in message ... Hi, Toshiba TV CF266B, ch TAC9215 (mfg 1992) Is there a way to change the factory set "contrast", which is set to maximum, to a lower setting? When I unplug the TV as a storm approaches, and later plug it in, the picture returns to the factory settings. I have three different universal remotes and none can access the picture settings. The original remote recently got damaged beyond repair, now I no longer can access the picture settings. Note: Adjustment for picture is not available at the front panel. Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. |
#3
|
|||
|
|||
And, of course, by use of that other unique device, the original Remote
Control. Other than that fact you probably can not reprogramme the inbedded E-Prom nor the CPU codex. "kip" wrote in message .. . You CAN adjust them from the front lower manual controls very easily. kip "Brad" wrote in message ... Hi, Toshiba TV CF266B, ch TAC9215 (mfg 1992) Is there a way to change the factory set "contrast", which is set to maximum, to a lower setting? When I unplug the TV as a storm approaches, and later plug it in, the picture returns to the factory settings. I have three different universal remotes and none can access the picture settings. The original remote recently got damaged beyond repair, now I no longer can access the picture settings. Note: Adjustment for picture is not available at the front panel. Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. |
#4
|
|||
|
|||
Hi Kip,
Thanks for that information. This TV was left at my shop so I put it in our family room after I repaired it. The "function" button never worked so after reading your reply, I replaced the button switch and now I can adjust the picture. I always thought that switch was for that purpose, but never bothered to fix it since I was able to adjust via the remote. Brad On Sat, 16 Jul 2005 08:11:14 -0400, "kip" wrote: You CAN adjust them from the front lower manual controls very easily. kip "Brad" wrote in message ... Hi, Toshiba TV CF266B, ch TAC9215 (mfg 1992) Is there a way to change the factory set "contrast", which is set to maximum, to a lower setting? When I unplug the TV as a storm approaches, and later plug it in, the picture returns to the factory settings. I have three different universal remotes and none can access the picture settings. The original remote recently got damaged beyond repair, now I no longer can access the picture settings. Note: Adjustment for picture is not available at the front panel. Thanks in advance, Brad Before you type your password, credit card number, etc., be sure there is no active key logger (spyware) in your PC. |
#5
|
|||
|
|||
Glad you got it fixed Brad ,thats what I like about those Toshiba,s
you can do all with the buttons that the remote can do. kip |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Toshiba television won't change from Cable (VHF) to TV (UHF+VHF) mode | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
ICs for Sale - Specials, obsolete and Memory | Electronics Repair | |||
imac monitor adjustment: how to change factory settings? | Electronics Repair | |||
Toshiba TV CF2662B ch TAC9215 with Delayed Sound | Electronics Repair |