Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
"Lou" wrote in message o.verio.net... Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground? Double Insulated? Does it have the symbol? N |
#2
|
|||
|
|||
Lou wrote: Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou Hi Lou... Take this with a grain of salt... I'm old and long retired. Regardless, though I have no Craftsman electric yard stuff, I do have other makers, and they're all two plug - no ground. I suspect what happened is that too many people bent or broke off the ground pin so they could use two wire extensions, so the manufacturers went to that double insulated plastic idea. In any case, don't even think of plugging it in while that white wire is exposed. Also, replace the cord; don't even think about taping up the current one. Take care. Ken |
#3
|
|||
|
|||
"Lou" wrote in message o.verio.net... Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou I've never seen an electric weed eater with a 3 prong plug, they're always double insulated. It's better that way since it's all too common for people to cut off the ground prong. |
#4
|
|||
|
|||
I have all electric lawn care stuff and never run it without my GFCI
pigtail at the outlet. Richard |
#5
|
|||
|
|||
"Lou" wrote in message o.verio.net... Except for where it says Craftsman, that is all I am able to read on it. All other labeling is shot............. 99.9% it is double insulated. You MUST repair it back to that standard - replace any broken or cracked plastic parts etc. to ensure safety AND use it from a GFCI. Death is too high a price to pay for a weed free lawn. N |
#6
|
|||
|
|||
OT? Sears Craftsman Weed Whacker
Hi,
Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou |
#7
|
|||
|
|||
"spudnuty" wrote in message oups.com... I have all electric lawn care stuff and never run it without my GFCI pigtail at the outlet. Richard All outdoor outlets should be connected to a GFCI already, but a pigtail with another one won't hurt. |
#8
|
|||
|
|||
On Wed, 1 Jun 2005 17:23:10 -1200, "Lou"
wrote: Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou No need to have a ground plug on an appliance that is double insulated, completely encased in plastic. Yes virtually all Sears weed-whackers and electric leaf blowers etc... that I've worked on were two prong. Sears does have a website where you can get schematics and parts. www3.sears.com You will have to have a part # though. If the label is gone on the unit try reverse tracking the part. Take the case apart and get the part # off the plastic housing. Run that through the sears parts finder at the above link and it should tell you what model # it's for. |
#9
|
|||
|
|||
"NSM" wrote in message news:3irne.28774$on1.26475@clgrps13... "Lou" wrote in message o.verio.net... Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground? Double Insulated? Does it have the symbol? N Except for where it says Craftsman, that is all I am able to read on it. All other labeling is shot............. Lou |
#10
|
|||
|
|||
"Ken Weitzel" wrote in message news:dYtne.1537759$8l.579197@pd7tw1no... Lou wrote: Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou Hi Lou... Take this with a grain of salt... I'm old and long retired. Regardless, though I have no Craftsman electric yard stuff, I do have other makers, and they're all two plug - no ground. I suspect what happened is that too many people bent or broke off the ground pin so they could use two wire extensions, so the manufacturers went to that double insulated plastic idea. In any case, don't even think of plugging it in while that white wire is exposed. Also, replace the cord; don't even think about taping up the current one. Take care. Ken Oh believe me, that was not even a thought. My Momma didn't raise any fool. I don't mind repairing items regardless what they are and so far have been pretty good or lucky, but it just struck me off, this thing wasn't "grounded". Or at least by use of a 3 prong plug and cable. I'll check it out well before this sucker is plugged in. Now, to find a cord to fit it!!!!!!!!! Thanks for info Lou |
#11
|
|||
|
|||
"James Sweet" wrote in message news:t3une.18290$tv3.14317@trnddc06... "Lou" wrote in message o.verio.net... Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou I've never seen an electric weed eater with a 3 prong plug, they're always double insulated. It's better that way since it's all too common for people to cut off the ground prong. \ Well, that answers my question. Guess I got to find a cord and wire it accordingly. Thanks! Lou |
#12
|
|||
|
|||
"spudnuty" wrote in message oups.com... I have all electric lawn care stuff and never run it without my GFCI pigtail at the outlet. Richard \ That was what I was going to suggest with or without a 3 prong cord, once returned to them..... Thanks, Lou |
#13
|
|||
|
|||
"NSM" writes:
"Lou" wrote in message o.verio.net... Except for where it says Craftsman, that is all I am able to read on it. All other labeling is shot............. 99.9% it is double insulated. You MUST repair it back to that standard - replace any broken or cracked plastic parts etc. to ensure safety AND use it from a GFCI. Death is too high a price to pay for a weed free lawn. I guess you haven't met some avid gardeners then. --- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/ Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/ +Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm | Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html Note: These links are hopefully temporary until we can sort out the excessive traffic on Repairfaq.org. Important: Anything sent to the email address in the message header above is ignored unless my full name is included in the subject line. Or, you can contact me via the Feedback Form in the FAQs. |
#14
|
|||
|
|||
"James Sweet" wrote in message
news:iexne.14372$3u3.5163@trnddc07... "spudnuty" wrote in message oups.com... I have all electric lawn care stuff and never run it without my GFCI pigtail at the outlet. Richard All outdoor outlets should be connected to a GFCI already, but a pigtail with another one won't hurt. I agree, any home with an outdoor access to electricity, should have a GFCI. |
#15
|
|||
|
|||
"none" wrote in message ... On Wed, 1 Jun 2005 17:23:10 -1200, "Lou" wrote: Hi, Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric cord was all taped up, a white wire sticking out of the handle near the trigger. It was pinched when the handle was attempted to be reassembled. I was told, this unit was "shocking" the owner when being used. I'm not much of a fan of "electric" weed whackers, therefore paid little attention to them. This model has a 2 prong plug on it, the cord - the basic appliance type cord of 15 Amp or so. Did any/all of these types of weed whackers use a 2 prong plug? Why not a 3 - with a ground???? I'm wondering if this cord was replaced before being brought here. I haven't opened it up as yet - to take a look see. Was hoping to get some info on this thing before hand. There is no model number on it that I can see. The only label left on it, is "Craftsman". IF there is a Sears site or anywhere else I can go to get the wiring scheme on this, please let me know. Thanks, Lou No need to have a ground plug on an appliance that is double insulated, completely encased in plastic. Yes virtually all Sears weed-whackers and electric leaf blowers etc... that I've worked on were two prong. Sears does have a website where you can get schematics and parts. www3.sears.com You will have to have a part # though. If the label is gone on the unit try reverse tracking the part. Take the case apart and get the part # off the plastic housing. Run that through the sears parts finder at the above link and it should tell you what model # it's for. WOW, thanks for the website, I appreciate it. I'll go look at it. Getting in touch with the person who dropped this off, isn't easy. I'm going to ask if perhaps he has the manual yet, for a model number. If not, then I'll do my search the other way - maybe I'll start it anyway, just in case I can find it sooner than getting in touch with the party. As I said, I'm not and never was much of an "electrical" weed whacker or mower" fan due to not wanting to lug an extension cord around. I have repaired electrical items before and without problem. I do electronics repairs for a living. I just never paid any attention to the Electrical lawn items to see how they were wired since I didn't like them. I was just amazed they weren't "grounded" via a 3 conductor cord. I understand the double insulated idea, but it just seemed to me - a step more would have been better. But that is why they are the designers and I'm not. Lou |
#16
|
|||
|
|||
"NSM" wrote in message news:OSune.28795$on1.3424@clgrps13... "Lou" wrote in message o.verio.net... Except for where it says Craftsman, that is all I am able to read on it. All other labeling is shot............. 99.9% it is double insulated. You MUST repair it back to that standard - replace any broken or cracked plastic parts etc. to ensure safety AND use it from a GFCI. Death is too high a price to pay for a weed free lawn. N I have no argument with that! I had no intentions of doing it any other way. Lou |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Sears Craftsman Club Changes | Woodworking | |||
Question about old sears craftsman router... | Woodworking | |||
New Sears Craftsman Tablesaws 22114 and 22124 | Woodworking | |||
Old Sears Craftsman Planer model # 113.20621 - looking for manual | Woodworking | |||
Sears Craftsman Garage Door Opener Remote Control FYI | Home Repair |