DIYbanter

DIYbanter (https://www.diybanter.com/)
-   Electronics Repair (https://www.diybanter.com/electronics-repair/)
-   -   OT? Sears Craftsman Weed Whacker (https://www.diybanter.com/electronics-repair/108677-ot-sears-craftsman-weed-whacker.html)

NSM June 2nd 05 12:13 AM


"Lou" wrote in message
o.verio.net...

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground?


Double Insulated? Does it have the symbol?

N



Ken Weitzel June 2nd 05 03:14 AM



Lou wrote:

Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before being
brought here. I haven't opened it up as yet - to take a look see. Was hoping
to get some info on this thing before hand. There is no model number on it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring scheme
on this, please let me know.

Thanks,

Lou


Hi Lou...

Take this with a grain of salt... I'm old and long
retired. :)

Regardless, though I have no Craftsman electric yard
stuff, I do have other makers, and they're all two plug - no
ground.

I suspect what happened is that too many people bent or
broke off the ground pin so they could use two wire
extensions, so the manufacturers went to that double
insulated plastic idea.

In any case, don't even think of plugging it in while
that white wire is exposed.

Also, replace the cord; don't even think about taping up
the current one.

Take care.

Ken


James Sweet June 2nd 05 03:22 AM


"Lou" wrote in message
o.verio.net...
Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not

much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before being
brought here. I haven't opened it up as yet - to take a look see. Was

hoping
to get some info on this thing before hand. There is no model number on it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring

scheme
on this, please let me know.

Thanks,

Lou




I've never seen an electric weed eater with a 3 prong plug, they're always
double insulated. It's better that way since it's all too common for people
to cut off the ground prong.



spudnuty June 2nd 05 03:31 AM

I have all electric lawn care stuff and never run it without my GFCI
pigtail at the outlet.
Richard


NSM June 2nd 05 04:17 AM


"Lou" wrote in message
o.verio.net...

Except for where it says Craftsman, that is all I am able to read on it.

All
other labeling is shot.............


99.9% it is double insulated. You MUST repair it back to that standard -
replace any broken or cracked plastic parts etc. to ensure safety AND use it
from a GFCI. Death is too high a price to pay for a weed free lawn.

N



Lou June 2nd 05 06:23 AM

OT? Sears Craftsman Weed Whacker
 
Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before being
brought here. I haven't opened it up as yet - to take a look see. Was hoping
to get some info on this thing before hand. There is no model number on it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring scheme
on this, please let me know.

Thanks,

Lou



James Sweet June 2nd 05 06:58 AM


"spudnuty" wrote in message
oups.com...
I have all electric lawn care stuff and never run it without my GFCI
pigtail at the outlet.
Richard


All outdoor outlets should be connected to a GFCI already, but a pigtail
with another one won't hurt.



none June 2nd 05 10:05 AM

On Wed, 1 Jun 2005 17:23:10 -1200, "Lou"
wrote:

Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before being
brought here. I haven't opened it up as yet - to take a look see. Was hoping
to get some info on this thing before hand. There is no model number on it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring scheme
on this, please let me know.

Thanks,

Lou


No need to have a ground plug on an appliance that is double
insulated, completely encased in plastic.
Yes virtually all Sears weed-whackers and electric leaf blowers etc...
that I've worked on were two prong.
Sears does have a website where you can get schematics and parts.
www3.sears.com

You will have to have a part # though.
If the label is gone on the unit try reverse tracking the part. Take
the case apart and get the part # off the plastic housing.
Run that through the sears parts finder at the above link and it
should tell you what model # it's for.

Lou June 2nd 05 12:01 PM


"NSM" wrote in message
news:3irne.28774$on1.26475@clgrps13...

"Lou" wrote in message
o.verio.net...

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground?


Double Insulated? Does it have the symbol?

N


Except for where it says Craftsman, that is all I am able to read on it. All
other labeling is shot.............

Lou



Lou June 2nd 05 12:04 PM


"Ken Weitzel" wrote in message
news:dYtne.1537759$8l.579197@pd7tw1no...


Lou wrote:

Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the
electric cord was all taped up, a white wire sticking out of the handle
near the trigger. It was pinched when the handle was attempted to be
reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not
much of a fan of "electric" weed whackers, therefore paid little
attention to them. This model has a 2 prong plug on it, the cord - the
basic appliance type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before
being brought here. I haven't opened it up as yet - to take a look see.
Was hoping to get some info on this thing before hand. There is no model
number on it that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring
scheme on this, please let me know.

Thanks,

Lou


Hi Lou...

Take this with a grain of salt... I'm old and long
retired. :)

Regardless, though I have no Craftsman electric yard
stuff, I do have other makers, and they're all two plug - no
ground.

I suspect what happened is that too many people bent or
broke off the ground pin so they could use two wire
extensions, so the manufacturers went to that double
insulated plastic idea.

In any case, don't even think of plugging it in while
that white wire is exposed.

Also, replace the cord; don't even think about taping up
the current one.

Take care.

Ken


Oh believe me, that was not even a thought. My Momma didn't raise any fool.
I don't mind repairing items regardless what they are and so far have been
pretty good or lucky, but it just struck me off, this thing wasn't
"grounded". Or at least by use of a 3 prong plug and cable.

I'll check it out well before this sucker is plugged in. Now, to find a cord
to fit it!!!!!!!!!

Thanks for info

Lou



Lou June 2nd 05 12:05 PM


"James Sweet" wrote in message
news:t3une.18290$tv3.14317@trnddc06...

"Lou" wrote in message
o.verio.net...
Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the
electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not

much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before
being
brought here. I haven't opened it up as yet - to take a look see. Was

hoping
to get some info on this thing before hand. There is no model number on
it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring

scheme
on this, please let me know.

Thanks,

Lou




I've never seen an electric weed eater with a 3 prong plug, they're always
double insulated. It's better that way since it's all too common for
people
to cut off the ground prong.

\

Well, that answers my question. Guess I got to find a cord and wire it
accordingly. Thanks!

Lou



Lou June 2nd 05 12:06 PM


"spudnuty" wrote in message
oups.com...
I have all electric lawn care stuff and never run it without my GFCI
pigtail at the outlet.
Richard

\

That was what I was going to suggest with or without a 3 prong cord, once
returned to them.....

Thanks,

Lou



Sam Goldwasser June 2nd 05 01:12 PM

"NSM" writes:

"Lou" wrote in message
o.verio.net...

Except for where it says Craftsman, that is all I am able to read on it.

All
other labeling is shot.............


99.9% it is double insulated. You MUST repair it back to that standard -
replace any broken or cracked plastic parts etc. to ensure safety AND use it
from a GFCI. Death is too high a price to pay for a weed free lawn.


I guess you haven't met some avid gardeners then. :)

--- sam | Sci.Electronics.Repair FAQ Mirror: http://repairfaq.ece.drexel.edu/
Repair | Main Table of Contents: http://repairfaq.ece.drexel.edu/REPAIR/
+Lasers | Sam's Laser FAQ: http://repairfaq.ece.drexel.edu/sam/lasersam.htm
| Mirror Sites: http://repairfaq.ece.drexel.edu/REPAIR/F_mirror.html

Note: These links are hopefully temporary until we can sort out the excessive
traffic on Repairfaq.org.

Important: Anything sent to the email address in the message header above is
ignored unless my full name is included in the subject line. Or, you can
contact me via the Feedback Form in the FAQs.

Lou June 2nd 05 04:21 PM

"James Sweet" wrote in message
news:iexne.14372$3u3.5163@trnddc07...

"spudnuty" wrote in message
oups.com...
I have all electric lawn care stuff and never run it without my GFCI
pigtail at the outlet.
Richard


All outdoor outlets should be connected to a GFCI already, but a pigtail
with another one won't hurt.



I agree, any home with an outdoor access to electricity, should have a GFCI.



Lou June 2nd 05 04:31 PM


"none" wrote in message
...
On Wed, 1 Jun 2005 17:23:10 -1200, "Lou"
wrote:

Hi,

Some one dropped of a Sears Craftsman Electric Weed Whacker - the electric
cord was all taped up, a white wire sticking out of the handle near the
trigger. It was pinched when the handle was attempted to be reassembled.

I was told, this unit was "shocking" the owner when being used. I'm not
much
of a fan of "electric" weed whackers, therefore paid little attention to
them. This model has a 2 prong plug on it, the cord - the basic appliance
type cord of 15 Amp or so.

Did any/all of these types of weed whackers use a 2 prong plug? Why not a
3 - with a ground???? I'm wondering if this cord was replaced before being
brought here. I haven't opened it up as yet - to take a look see. Was
hoping
to get some info on this thing before hand. There is no model number on it
that I can see. The only label left on it, is "Craftsman".

IF there is a Sears site or anywhere else I can go to get the wiring
scheme
on this, please let me know.

Thanks,

Lou


No need to have a ground plug on an appliance that is double
insulated, completely encased in plastic.
Yes virtually all Sears weed-whackers and electric leaf blowers etc...
that I've worked on were two prong.
Sears does have a website where you can get schematics and parts.
www3.sears.com

You will have to have a part # though.
If the label is gone on the unit try reverse tracking the part. Take
the case apart and get the part # off the plastic housing.
Run that through the sears parts finder at the above link and it
should tell you what model # it's for.


WOW, thanks for the website, I appreciate it. I'll go look at it. Getting in
touch with the person who dropped this off, isn't easy. I'm going to ask if
perhaps he has the manual yet, for a model number. If not, then I'll do my
search the other way - maybe I'll start it anyway, just in case I can find
it sooner than getting in touch with the party. As I said, I'm not and never
was much of an "electrical" weed whacker or mower" fan due to not wanting to
lug an extension cord around. I have repaired electrical items before and
without problem. I do electronics repairs for a living. I just never paid
any attention to the Electrical lawn items to see how they were wired since
I didn't like them. I was just amazed they weren't "grounded" via a 3
conductor cord. I understand the double insulated idea, but it just seemed
to me - a step more would have been better. But that is why they are the
designers and I'm not.

Lou



Lou June 2nd 05 04:32 PM


"NSM" wrote in message news:OSune.28795$on1.3424@clgrps13...

"Lou" wrote in message
o.verio.net...

Except for where it says Craftsman, that is all I am able to read on it.

All
other labeling is shot.............


99.9% it is double insulated. You MUST repair it back to that standard -
replace any broken or cracked plastic parts etc. to ensure safety AND use
it
from a GFCI. Death is too high a price to pay for a weed free lawn.

N



I have no argument with that! I had no intentions of doing it any other way.

Lou




All times are GMT +1. The time now is 06:55 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter