Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Bob Kos
 
Posts: n/a
Default Apex Television Parts Available?

Hi All:

I'm trying to fix a television for a friend. It is an Apex model GT-2105.
It has a shorted Horiz. outpit transistor. The device is marked 'D2102'. I
can't seem to locate a reliable cross to this part. Does anybody have any
ideas? I've read in other threads that Apex products are truly disposable
electronics. True? Or are parts actually available? Any help appreciated



  #2   Report Post  
Ken Weitzel
 
Posts: n/a
Default



Bob Kos wrote:
Hi All:

I'm trying to fix a television for a friend. It is an Apex model GT-2105.
It has a shorted Horiz. outpit transistor. The device is marked 'D2102'. I
can't seem to locate a reliable cross to this part. Does anybody have any
ideas? I've read in other threads that Apex products are truly disposable
electronics. True? Or are parts actually available? Any help appreciated


Hi Bob...

Don't know the set so just off the top of my head...

Try a 2sd2102

Take care.

Ken

  #3   Report Post  
 
Posts: n/a
Default

Do a Google groups search for Apex and whatever, there is a thread in
here that gives a URL where you can get schematics.

Most Apex parts can be subbed, but it took some doing to get the
LA76814K ICs.

As far as yokes and flys go I don't know, but I haven't seen a bad one
yet. Of course I don't work on alot of Apex.

I couldn't get a datasheet right away on the 2SD2102, but I'll tell ya,
you can sub almost ANY NTSC horiz or HV output with a 2SC5150. Good
maximum ratings and excellent gain and switching times, with this it
can stand a lower drive level, but with it's high current rating it can
tolerate drive circuits that put out a bit too much.

I think B&D gets about $7 for them. I use them when we get a long term
(like a week) HOT failure repeatedly. This is legal since 1976, "safety
cannot depend on THE FAILURE of a semiconductor". I also use them when
I can't get the original and can't get specs either.

JURB

  #4   Report Post  
Art
 
Posts: n/a
Default

APEX does not supply any parts and no support for their products. Most
retailers exchange these sets while still under warranty, after that they
are a throw away item.
wrote in message
oups.com...
Do a Google groups search for Apex and whatever, there is a thread in
here that gives a URL where you can get schematics.

Most Apex parts can be subbed, but it took some doing to get the
LA76814K ICs.

As far as yokes and flys go I don't know, but I haven't seen a bad one
yet. Of course I don't work on alot of Apex.

I couldn't get a datasheet right away on the 2SD2102, but I'll tell ya,
you can sub almost ANY NTSC horiz or HV output with a 2SC5150. Good
maximum ratings and excellent gain and switching times, with this it
can stand a lower drive level, but with it's high current rating it can
tolerate drive circuits that put out a bit too much.

I think B&D gets about $7 for them. I use them when we get a long term
(like a week) HOT failure repeatedly. This is legal since 1976, "safety
cannot depend on THE FAILURE of a semiconductor". I also use them when
I can't get the original and can't get specs either.

JURB



  #5   Report Post  
PainintheAmp
 
Posts: n/a
Default

Try 2SD2102...if you cant find a direct replacement, Try NTE
electronics.

Tritronics has some APEX parts but not too much

Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Seeking shop that can make some small brass parts. (USA) nob'dy Metalworking 3 August 25th 04 10:19 PM
Will South Bend 9" parts for Atlas stuff + more GTO69RA4 Metalworking 6 August 17th 04 05:10 AM
Apex Television Secret Menu Adjust Size Christopher Glenn Electronics Repair 0 May 10th 04 05:44 PM
Looking for a distributor for old SHARP parts Adrian G. Electronics Repair 0 April 11th 04 11:17 AM
cleaning parts after tumbling Ryan Metalworking 6 July 16th 03 08:10 PM


All times are GMT +1. The time now is 09:07 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"