Home |
Search |
Today's Posts |
|
Electronics Repair (sci.electronics.repair) Discussion of repairing electronic equipment. Topics include requests for assistance, where to obtain servicing information and parts, techniques for diagnosis and repair, and annecdotes about success, failures and problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Apex Television Parts Available?
Hi All:
I'm trying to fix a television for a friend. It is an Apex model GT-2105. It has a shorted Horiz. outpit transistor. The device is marked 'D2102'. I can't seem to locate a reliable cross to this part. Does anybody have any ideas? I've read in other threads that Apex products are truly disposable electronics. True? Or are parts actually available? Any help appreciated |
#2
|
|||
|
|||
Bob Kos wrote: Hi All: I'm trying to fix a television for a friend. It is an Apex model GT-2105. It has a shorted Horiz. outpit transistor. The device is marked 'D2102'. I can't seem to locate a reliable cross to this part. Does anybody have any ideas? I've read in other threads that Apex products are truly disposable electronics. True? Or are parts actually available? Any help appreciated Hi Bob... Don't know the set so just off the top of my head... Try a 2sd2102 Take care. Ken |
#3
|
|||
|
|||
Do a Google groups search for Apex and whatever, there is a thread in
here that gives a URL where you can get schematics. Most Apex parts can be subbed, but it took some doing to get the LA76814K ICs. As far as yokes and flys go I don't know, but I haven't seen a bad one yet. Of course I don't work on alot of Apex. I couldn't get a datasheet right away on the 2SD2102, but I'll tell ya, you can sub almost ANY NTSC horiz or HV output with a 2SC5150. Good maximum ratings and excellent gain and switching times, with this it can stand a lower drive level, but with it's high current rating it can tolerate drive circuits that put out a bit too much. I think B&D gets about $7 for them. I use them when we get a long term (like a week) HOT failure repeatedly. This is legal since 1976, "safety cannot depend on THE FAILURE of a semiconductor". I also use them when I can't get the original and can't get specs either. JURB |
#4
|
|||
|
|||
APEX does not supply any parts and no support for their products. Most
retailers exchange these sets while still under warranty, after that they are a throw away item. wrote in message oups.com... Do a Google groups search for Apex and whatever, there is a thread in here that gives a URL where you can get schematics. Most Apex parts can be subbed, but it took some doing to get the LA76814K ICs. As far as yokes and flys go I don't know, but I haven't seen a bad one yet. Of course I don't work on alot of Apex. I couldn't get a datasheet right away on the 2SD2102, but I'll tell ya, you can sub almost ANY NTSC horiz or HV output with a 2SC5150. Good maximum ratings and excellent gain and switching times, with this it can stand a lower drive level, but with it's high current rating it can tolerate drive circuits that put out a bit too much. I think B&D gets about $7 for them. I use them when we get a long term (like a week) HOT failure repeatedly. This is legal since 1976, "safety cannot depend on THE FAILURE of a semiconductor". I also use them when I can't get the original and can't get specs either. JURB |
#5
|
|||
|
|||
Try 2SD2102...if you cant find a direct replacement, Try NTE
electronics. Tritronics has some APEX parts but not too much |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Seeking shop that can make some small brass parts. (USA) | Metalworking | |||
Will South Bend 9" parts for Atlas stuff + more | Metalworking | |||
Apex Television Secret Menu Adjust Size | Electronics Repair | |||
Looking for a distributor for old SHARP parts | Electronics Repair | |||
cleaning parts after tumbling | Metalworking |