Electronic Schematics (alt.binaries.schematics.electronic) A place to show and share your electronics schematic drawings.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 35
Default MTX 6500D Blown Resistors - resistors.jpg (1/1)



Attached Thumbnails
MTX 6500D Blown Resistors - resistors.jpg (1/1)-resistors-jpg  
  #2   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 43
Default MTX 6500D Blown Resistors - resistors.jpg (1/1)


"Steve" wrote in message
news
What did they come out of ?


  #3   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 43
Default MTX 6500D Blown Resistors - resistors.jpg (1/1)


"Steve" wrote in message
news
http://ampguts.realmofexcursion.com/...0d/inside4.jpg


  #4   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 43
Default MTX 6500D Blown Resistors - resistors.jpg (1/1)

"Steve" wrote in message
news
Try just hooking up 2 ohms or 4 ohm speakers, not 8 ohm speakers which
(oddly enough) will burn out the Fets and two resistors.
Sent a message to Loyd Ivey of Mitek Corp, dunno if he'll respond or tell
his secretary to ...
However, swordfish689 on diyAudio recommends calling Mouser.Com on the
phone and asking them, since they have the parts and values already
memorized due to people using 8 Ohm Speakers....


  #5   Report Post  
Posted to alt.binaries.schematics.electronic
external usenet poster
 
Posts: 35
Default MTX 6500D Blown Resistors - resistors.jpg (1/1)

On Sun, 6 Apr 2008 03:25:47 -0500, "William Hayes"
wrote:

"Steve" wrote in message
news
Try just hooking up 2 ohms or 4 ohm speakers, not 8 ohm speakers which
(oddly enough) will burn out the Fets and two resistors.
Sent a message to Loyd Ivey of Mitek Corp, dunno if he'll respond or tell
his secretary to ...
However, swordfish689 on diyAudio recommends calling Mouser.Com on the
phone and asking them, since they have the parts and values already
memorized due to people using 8 Ohm Speakers....

Thanks for the info. I'll definantely shoot him an email & give
Mouser a call.

Steve
Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
MTX 6500D Blown Resistors - resistors.jpg (0/1) Steve[_15_] Electronic Schematics 18 April 8th 08 02:34 AM
Resistors marked 4.7 ohm K N Cook Electronics Repair 9 January 12th 08 03:06 PM
Crossover resistors DanFXR Electronics Repair 2 February 1st 07 01:34 PM
Resistors Dave Plowman (News) UK diy 27 December 30th 06 06:28 PM
Precision Resistors HELP! Dennis Electronics Repair 0 September 25th 03 05:14 PM


All times are GMT +1. The time now is 05:58 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"