Home |
Search |
Today's Posts |
|
Home Repair (alt.home.repair) For all homeowners and DIYers with many experienced tradesmen. Solve your toughest home fix-it problems. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
Heard an old episode of Michael Feldman's radio show.
In one segment he reads memos or other printed stuff listeners send in. This was from the ownwers manual of a something-something Kenmore refrigerator with a bottom drawer freezer. In the section one what noises the appliance might make, it had this list: Clicking-normal sound Whirring-normal sound Gurgling-normal sound Thumpng-normal sound Hissing or popping-normal sound One more sound-normal sound |
#2
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
Sounds exactly like the manual for mine, which sure enough is a Kenmore bottom freezer- the something something is french doors. Maybe they were anticipating a lot of service calls; since everything short of explosive is described as normal operation. |
#3
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
"Sev" wrote in news:1151185103.575091.160410
@r2g2000cwb.googlegroups.com: Maybe they were anticipating a lot of service calls; since everything short of explosive is described as normal operation. I had the most fascinating conversation today with the helpful people at Sears. My washing machine, which is little over a year old, stopped mid-cycle and began emitting a series of beeps. The LCD on the panel said E10, which I assumed was an error code, so I went through all the documentation and could find nothing about error codes (though there were other "troubleshooting" suggestions like checking to make sure the power was plugged in and the hoses attached, etc). I called the Sears 800 number, and they immediately began to schedule a service call for next Wednesday. I said that I didn't need a service call; that it was likely something simple and if someone would kindly tell me what the error code means, I could take care of it myself. She told me that there was no number for tech support -- that the only way I could talk to a tech support person was to schedule a service call for them to come to my house. "Are you telling me that your tech support has no phone?" I demanded, to which she asked, "Do you have an extended warranty?" I told her I didn't, to which she responded that in that case, they do not have a phone number. "So what you're telling me is that they have a phone number, but that you won't give it to me because I didn't purchase your extended warranty?" I asked. She said that it was an "internal" number, and no, I couldn't have it. I then asked why they even bother to display the error codes on the machines if they aren't going to give customers the information that the error code references, and again, she tried to schedule a $90 service call. I told her how delighted I was with my choice to purchase my washer and dryer at Sears, along with what she could do with her service call, and hung up. Then I re-set the washer and it re-started and ran through the cycle without a problem. Guess I'll never know what caused the error, but. . .that's got to be the most amazing service policy I've ever heard of. Bottom line is. . .even the simplest tech question costs $90. The moral of the story is. . .shop with care if you're intent on shopping at Sears at all -- and for goodness sake, don't buy Kenmore. At least with any other brand, I could have called the manufacturer. |
#4
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
"Perri Morgan" wrote in message ... "Sev" wrote in news:1151185103.575091.160410 @r2g2000cwb.googlegroups.com: Maybe they were anticipating a lot of service calls; since everything short of explosive is described as normal operation. I had the most fascinating conversation today with the helpful people at Sears. My washing machine, which is little over a year old, stopped mid-cycle and began emitting a series of beeps. The LCD on the panel said E10, which I assumed was an error code, so I went through all the documentation and could find nothing about error codes (though there were other "troubleshooting" suggestions like checking to make sure the power was plugged in and the hoses attached, etc). I called the Sears 800 number, and they immediately began to schedule a service call for next Wednesday. I said that I didn't need a service call; that it was likely something simple and if someone would kindly tell me what the error code means, I could take care of it myself. She told me that there was no number for tech support -- that the only way I could talk to a tech support person was to schedule a service call for them to come to my house. "Are you telling me that your tech support has no phone?" I demanded, to which she asked, "Do you have an extended warranty?" I told her I didn't, to which she responded that in that case, they do not have a phone number. "So what you're telling me is that they have a phone number, but that you won't give it to me because I didn't purchase your extended warranty?" I asked. She said that it was an "internal" number, and no, I couldn't have it. I then asked why they even bother to display the error codes on the machines if they aren't going to give customers the information that the error code references, and again, she tried to schedule a $90 service call. I told her how delighted I was with my choice to purchase my washer and dryer at Sears, along with what she could do with her service call, and hung up. Then I re-set the washer and it re-started and ran through the cycle without a problem. Guess I'll never know what caused the error, but. . .that's got to be the most amazing service policy I've ever heard of. Bottom line is. . .even the simplest tech question costs $90. The moral of the story is. . .shop with care if you're intent on shopping at Sears at all -- and for goodness sake, don't buy Kenmore. At least with any other brand, I could have called the manufacturer. The reason a phone number would have been available to you if you had purchased the protection agreement was that, they then would have wanted a tech to walk you through the problem to avoid a service call that would have come out of their pocket. If your machine had been under the regular warranty, you also would have been handed over to someone who would have walked you through the codes to again try to avoid a service call at Sears expense. I'm not saying the above policy is right or wrong but unless they've changed since I retired, at least the person you talked to was based in this country and spoke pretty good English or Spanish (if requested). By the way, I scheduled a maintenance check up on a 15 yr old central A/C system once. After the third time that my appointment was re-scheduled, it occurred to me that I had used the words "annual maintenance checkup" in my service request. The tech was assuming that I was looking for the "annual" that comes with a service agreement and since they are usually overbooked and they assumed I would be paying nothing for this service, they kept pushing me back. I called and rather heatedly pointed out that I was expecting to pay for this service call and that nothing was under warranty and a tech was knocking on my door a half hour later. Tom G. |
#5
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
On Sun, 25 Jun 2006 04:32:23 GMT, "Tom G"
wrote: "Perri Morgan" wrote in message . 8... "Sev" wrote in news:1151185103.575091.160410 @r2g2000cwb.googlegroups.com: Maybe they were anticipating a lot of service calls; since everything short of explosive is described as normal operation. I had the most fascinating conversation today with the helpful people at Sears. My washing machine, which is little over a year old, stopped mid-cycle and began emitting a series of beeps. The LCD on the panel said E10, which I assumed was an error code, so I went through all the documentation and could find nothing about error codes (though there were other "troubleshooting" suggestions like checking to make sure the power was plugged in and the hoses attached, etc). I called the Sears 800 number, and they immediately began to schedule a service call for next Wednesday. I said that I didn't need a service call; that it was likely something simple and if someone would kindly tell me what the error code means, I could take care of it myself. She told me that there was no number for tech support -- that the only way I could talk to a tech support person was to schedule a service call for them to come to my house. "Are you telling me that your tech support has no phone?" I demanded, to which she asked, "Do you have an extended warranty?" I told her I didn't, to which she responded that in that case, they do not have a phone number. "So what you're telling me is that they have a phone number, but that you won't give it to me because I didn't purchase your extended warranty?" I asked. She said that it was an "internal" number, and no, I couldn't have it. I then asked why they even bother to display the error codes on the machines if they aren't going to give customers the information that the error code references, and again, she tried to schedule a $90 service call. I told her how delighted I was with my choice to purchase my washer and dryer at Sears, along with what she could do with her service call, and hung up. Then I re-set the washer and it re-started and ran through the cycle without a problem. Guess I'll never know what caused the error, but. . .that's got to be the most amazing service policy I've ever heard of. Bottom line is. . .even the simplest tech question costs $90. The moral of the story is. . .shop with care if you're intent on shopping at Sears at all -- and for goodness sake, don't buy Kenmore. At least with any other brand, I could have called the manufacturer. The reason a phone number would have been available to you if you had purchased the protection agreement was that, they then would have wanted a tech to walk you through the problem to avoid a service call that would have come out of their pocket. If your machine had been under the regular warranty, you also would have been handed over to someone who would have walked you through the codes to again try to avoid a service call at Sears expense. I'm not saying the above policy is right or wrong but unless I"m not arguing with you, since you said you're not saying if this is good or bad, but you point out the very thing that is annoying about this to Perri. Warranty or protection agreement, they would want to walk the customer through to avoid a service call at Sears expense, but if the customer is paying they won't even put the error code and a little bit of walk-through in the owners manual. People understand why even on Usenet, posters don't want to answer the same questions over and over again, and why a ng will write an FAQ or why posters use canned answers, or tell people to search the web. Perri didn't start out expecting to talk to the service deparatment for free, and even when he wanted to, he would have settled for one sentence that explained E10. But noooooooo, they kept that a secret, and it's almost like they want to encourage service calls when the owner has to pay for it. That is very annoying, to say the least. I had something a while back that had a list of error codes in the manual, can't remember what it was, but the only ones they listed were codes that came up normally, like "out of paper" or "paper jamb". Things that represented more serious malfucntions were not listed at all. I think I was able to find out on a computer ng what the code meant (but that wouldn't help most people who don't even know newsgroups exist. ) they've changed since I retired, at least the person you talked to was based in this country and spoke pretty good English or Spanish (if requested). By the way, I scheduled a maintenance check up on a 15 yr old central A/C system once. After the third time that my appointment was re-scheduled, it occurred to me that I had used the words "annual maintenance checkup" in my service request. The tech was assuming that I was looking for the "annual" that comes with a service agreement and since they are usually overbooked and they assumed I would be paying nothing for this service, they kept pushing me back. I called and rather heatedly pointed out that I was expecting to pay for this service call and that nothing was under warranty and a tech was knocking on my door a half hour later. Tom G. |
#6
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
"Tom G" wrote in
news:rlong.4991$Wl.3581@trnddc01: The reason a phone number would have been available to you if you had purchased the protection agreement was that, they then would have wanted a tech to walk you through the problem to avoid a service call that would have come out of their pocket. If your machine had been under the regular warranty, you also would have been handed over to someone who would have walked you through the codes to again try to avoid a service call at Sears expense. I'm not saying the above policy is right or wrong but unless they've changed since I retired, at least the person you talked to was based in this country and spoke pretty good English or Spanish (if requested). I understand that. It's all about the money. And although I believe i should have been able to speak with a tech support person, my primary objection is to the fact that they do not provide the error code data with the purchase of the washer. That's a "gotcha" -- they've made it virtually impossible for anyone to fix a problem themselves, thus guaranteeing themselves the service fee. And the washer was purchased just over a year ago, but it took them three months to properly install it, so while technically, from the date of purchase, my warranty period had expired, due to their ineptitude, I'm still within my first year of actual use. In any event, times have changed a great deal, I fear. Things didn't used to be this hard. |
#7
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
mm wrote in
: I"m not arguing with you, since you said you're not saying if this is good or bad, but you point out the very thing that is annoying about this to Perri. Warranty or protection agreement, they would want to walk the customer through to avoid a service call at Sears expense, but if the customer is paying they won't even put the error code and a little bit of walk-through in the owners manual. Exactly my point. Thank you. Perri didn't start out expecting to talk to the service deparatment for free, and even when he wanted to, he would have settled for one sentence that explained E10. But noooooooo, they kept that a secret, and it's almost like they want to encourage service calls when the owner has to pay for it. That is very annoying, to say the least. Indeed it is, and in this case, the "he" is a "she". But I can still attempt to fix a washer myself if I know what's wrong with it. But I confess that I actually *was* expecting to talk to a service tech for free -- but only to find out what the stupid error code meant. I had something a while back that had a list of error codes in the manual, can't remember what it was, but the only ones they listed were codes that came up normally, like "out of paper" or "paper jamb". Yes, they have the simple stuff, like electrical and water connections in the "troubleshooting" section (those types of things don't show on the washer as LED error codes), but not a word about the error code messages other than "contact your local Sears Service Center." They sell the washer, but not all the information that should be with it. Anyhow, after re-starting the machine (sort of like re-booting the computer), the washer finished out the load without the error code popping back up, so all is well -- for today. As for Sears, this isn't over. I plan to call on a weekday and insist on a copy of the error codes and what they mean. I feel entitled to that information. |
#8
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
Depending on which washer was purchased, the error code information
might be in the technical information either inside the control panel, or in a plastic sleeve inside the machine. For example, in the HE3 series of Kenmore front load washers, there is technical information inside the kick panel area. Many companies no longer provide technical help outside of warranty or service agreement expiration dates. I would imagine that Dell computers is one company that strictly enforces this. Microsoft used to have a number for free technical help on all their software, and I bet they've done away with that. Just because a person at an #800 is easily reachable doesn't mean that the desired information will come free. It might be easier to find error codes on the internet. And just because one might find the meaning of the error code doesn't mean you would know what to do with the information. You might, but you also might not. Many people expect certain things to come with a machine, but if you don't explicitly state that the inclusion of such item is criteria for the purchase, you have no standing. You could request to see the owner's manual before making a purchase, but I bet that few salespeople would have the ability or willingness to fulfill that request. |
#9
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
On Sun, 25 Jun 2006 14:42:56 GMT, Perri Morgan
wrote: "Tom G" wrote in news:rlong.4991$Wl.3581@trnddc01: The reason a phone number would have been available to you if you had purchased the protection agreement was that, they then would have wanted a tech to walk you through the problem to avoid a service call that would have come out of their pocket. If your machine had been under the regular warranty, you also would have been handed over to someone who would have walked you through the codes to again try to avoid a service call at Sears expense. I'm not saying the above policy is right or wrong but unless they've changed since I retired, at least the person you talked to was based in this country and spoke pretty good English or Spanish (if requested). I understand that. It's all about the money. And although I believe i should have been able to speak with a tech support person, my primary objection is to the fact that they do not provide the error code data with the purchase of the washer. That's a "gotcha" -- they've made it virtually impossible for anyone to fix a problem themselves, thus guaranteeing themselves the service fee. And the washer was purchased just over a year ago, but it took them three months to properly install it, so while technically, from the date of purchase, my warranty period had expired, due to their ineptitude, I'm still within my first year of actual use. In any event, times have changed a great deal, I fear. Things didn't used to be this hard. You got that right!... Corporations in recent years have insisted that their repair operations become "profit centers" whereas before, service was something that all reputable manufactuers had to provide to stay competitive in sales, even if the service department operated as a loss. My big complaint is the generic appliance manuals that come with the machines. While they are filled with warnings about not using gasoline in your wash load, and who to call for parts.... They tell you virtually nothing about the operation of the specifc model that you bought. Sears/Kenmore is particularly guilty of this. Error codes for specific models, timing diagrams, and an electrical schematic should be among the minimum requirements for a good service manual. Beachcomber |
#11
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
|
#12
Posted to alt.home.repair
|
|||
|
|||
Instructoins for xxxx-Kenmore
All washers and dryers come with technical information that includes at
least a wiring diagram and a timing chart. It usually can be found in the control panel in top load washers, and inside the kick panel on front load washers. Some older machines have charts glued to the back of the unit. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
FS: Kenmore Appliances | Home Repair | |||
Kenmore dryer thermal cut-off popped again | Home Repair | |||
Kenmore Appliances | Home Repair | |||
Installing Kenmore Ultrafilter 550 Reverse Osmosis system | Home Repair | |||
2003 Consumer Reports Best Buys for your home | Home Ownership |