Hi, I am just starting to purchase tools, and I am having a hard time putting my table saw together. I bought a clearance model, 315.228390. It comes with the router extension. I can't get the extension level to the saw. It flares up a bit at the end. I can't see any way to adjust it,it is fastened directly to the table with 4 bolts.

Does anyone have any ideas?

Thanks,
Paul

SHIMS above the bolts should lower the end of the extension

Of course, first question has to be "Is the extension FLAT??" If it
isn't flat, talk to Sears about replacing it with one that IS flat

John



On Fri, 25 Feb 2005 22:03:50 +0000, pcolson
wrote:


Hi, I am just starting to purchase tools, and I am having a hard time
putting my table saw together. I bought a clearance model, 315.228390.
It comes with the router extension. I can't get the extension level to
the saw. It flares up a bit at the end. I can't see any way to adjust
it,it is fastened directly to the table with 4 bolts.

Does anyone have any ideas?

Thanks,
Paul

"pcolson" wrote in message
news

I bought a clearance model, 315.228390. It comes with the router
extension. I can't get the extension level to the saw. It flares up a bit
at the end.

I'm surprised that they had any of those left, nice saw for the buck. I
bought mine about a year ago and thought they were running out of them then.

I tightened mine fairly snug then took about a 12 inch length of 2X4, a
fairly heavy hammer and tapped back and forth across the joint/seam until it
lined up then tightened it up. Rob Mills