261. An "embosser" used to put a raised pattern "seal" on a letter,
envelope, or check. My dad has a similar one.



"R.H." wrote in message
news
Several new photos have been posted:

http://puzzlephotos.blogspot.com/


Some have mentioned that it would be interesting to know which group
posters
to this thread are from, so if you feel the inclination please include
this
with your reply.

I received an email from someone who collects scales and weights, he said
that number 244 (the spherical slotted weight that unscrews into two
pieces)
is an old ice weight. I did a lot of searching on the web and couldn't
find
anything on ice weights, so I emailed him asking for some more info but
haven't heard back yet. So if anyone can shed some light on this, please
let us know, or you have any antique books maybe you could take a look to
see if they are described therein.

Rob

"Mark & Juanita" wrote in message
...
On Thu, 10 Feb 2005 09:57:55 GMT, "R.H." wrote:

Several new photos have been posted:

http://puzzlephotos.blogspot.com/


Some have mentioned that it would be interesting to know which group
posters
to this thread are from, so if you feel the inclination please include
this
with your reply.

I received an email from someone who collects scales and weights, he said
that number 244 (the spherical slotted weight that unscrews into two
pieces)
is an old ice weight. I did a lot of searching on the web and couldn't
find
anything on ice weights, so I emailed him asking for some more info but
haven't heard back yet. So if anyone can shed some light on this, please
let us know, or you have any antique books maybe you could take a look to
see if they are described therein.

Rob

from rec.ww

#266: this is irritating, I know I've seen that, but can't remember in
what
context.

#267: Nut (fastener) that theoretically isn't supposed to work loose.
Usually comes with cheap toys.

Yes, it's a nut but it came from the hardware store so I guess that they're
used for other things besides toys.


#268: Looks like a syringe needle for animal medication, although the
offset is a bit odd.

Your second answer, in your follow-up post is correct.


#271: Looks like some sort of distillation apparatus from a chemistry lab

This one isn't part of a distillation apparatus.

"DoN. Nichols" wrote in message
...
In article ,
R.H. wrote:
Several new photos have been posted:

http://puzzlephotos.blogspot.com/


Some have mentioned that it would be interesting to know which group
posters
to this thread are from, so if you feel the inclination please include
this
with your reply.

As I was one who has made this suggestion, I should state that I
am reading/responding in rec.crafts.metalworking.

266) Some kind of tool for lifting hot objects. It might engage the
slots in old cast-iron wood burning stoves for lifing out the
covers for placing individual cooking containers.

That's what I was thinking, for something hot in the kitchen.


267) A formed acorn nut -- designed to be used to keep clothing or
parts of a person from snagging on the end of the bolt sticking
through the nut.

High-quality ones are machined from a single piece of metal,
polished, and plated with chrome or nickel.

This one was formed by folding petals of sheet steel over a
standard hex nut.

Correct, though there is no nut inside of this one, it's just folded sheet
steel.


268) Rifle bayonet. I don't recognize the rifle from the design,
but it *might* be a Revolutionary War or Civil War period piece.

Yes, but it's from a No. 4 Lee Enfield rifle.


269) Wood model airplane propeller, shot end on. This one is for an
engine which turns clockwise as viewed from behind the engine.
There are ones made for CCW operation as well.

Correct.


270) Hmm ... perhaps an image made by removing the silvering from a
mirrored piece of glass, and then backing it with a black
background? If so, there is probably a fancy term for the
process, which I do not know.

271) Hmm ... it looks as though it screws onto a hose. At a guess,
with reasonable water flow, the bent wire pieces spin, spraying
water all around the device. Thus it would be for cleaning
something fairly large -- perhaps the size of air conditioning
ducting or larger, with a serious flow of water beating against
the walls.

Partially right, it does screw onto a hose and it's used for cleaning.

"AL" wrote in message
news
261. An "embosser" used to put a raised pattern "seal" on a letter,
envelope, or check. My dad has a similar one.

This was part of last week's set, but you are correct nonetheless. It's a
book embosser, see the answer link at the bottom of that set of photos.

"Luigi Zanasi" wrote in message
news
On Thu, 10 Feb 2005 09:57:55 +0000, R.H. wrote:

Several new photos have been posted:

http://puzzlephotos.blogspot.com/

#267 hex cap nut

#268 bayonet

Both correct.


#269 Boletus mushroom viewed from the edge of the cap. :-)

#271 Wine bottle rinser. I use one to rinse my vino bottles.

Correct, I had never seen one before, so I wasn't sure who used them
exactly.

I wanted to mention that when the bottle is put over one of the small ends,
it is then pushed against the wire which opens a valve to release water,
when the bottle is removed the wire is returned to it's previous position by
a spring.

"R.H." wrote in message
news
Several new photos have been posted:

http://puzzlephotos.blogspot.com/


270 is a lantern slide. Edward Van Altena was a famous maker of lantern
slides. It's just the right size and is quite thin. Try googling his name
and you will come across some great websites with images of van Altena
slides. We have a few old astronomy lantern slides at our observatory.

266 is a real mystery object. It looks home-made to me. Possibly for
dipping eggs for Easter-egg dyeing? The loop looks a bit too big for this.
Please test and see if it can pick up an egg out of a pan of water.

--
Mike Dworetsky

(Remove "pants" spamblock to send e-mail)

"Mike Dworetsky" wrote in message
...
"R.H." wrote in message
news
Several new photos have been posted:

http://puzzlephotos.blogspot.com/


270 is a lantern slide. Edward Van Altena was a famous maker of lantern
slides. It's just the right size and is quite thin. Try googling his
name
and you will come across some great websites with images of van Altena
slides. We have a few old astronomy lantern slides at our observatory.


Correct, what I like about the magic lanterns is that they used a flame for
a light source instead of a light bulb, there are some really cool looking
photos of some a the bottom of this page:

http://courses.ncssm.edu/gallery/col.../exhibit02.htm

266 is a real mystery object. It looks home-made to me. Possibly for
dipping eggs for Easter-egg dyeing? The loop looks a bit too big for
this.
Please test and see if it can pick up an egg out of a pan of water.

I don't have any eggs, but I can tell you that the inside dimension is 1
11/16", probably too large for most eggs.

* R. H.
267 - Cheap pressed steel acorn nut

All correct

Please forgive my ignorance, but what really _is_ a "cheap pressed
steel acorn nut"?

--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway,
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92

On 12 Feb 2005 12:21:03 +0100, Jon Haugsand
wrote:

Please forgive my ignorance, but what really _is_ a "cheap pressed
steel acorn nut"?

An acorn nut is a nut with a blind hole and a rounded end. It stops
the threaded rod poking through as a hazard.

Nuts are made by an automatic capstan lathe. Acorn nuts (turned from
solid) are expensive to make this way, because they need to be held
one way round for threading, then rotates to turn the acorn. This
makes them cost several times what a plain nut does.

This type of cheap acorn nut is pressed from thin sheet. A hole is
punched and drawn into a rough funnel, which can be threaded. A
"flower" shape is then blanked out and the petals bent together to
form the acorn.

This type of nut is commonly seen on cheap metal toys, like kid's
bicycles.

In article ,
Andy Dingley wrote:
On 12 Feb 2005 12:21:03 +0100, Jon Haugsand
wrote:

Please forgive my ignorance, but what really _is_ a "cheap pressed
steel acorn nut"?

An acorn nut is a nut with a blind hole and a rounded end. It stops
the threaded rod poking through as a hazard.

Nuts are made by an automatic capstan lathe. Acorn nuts (turned from
solid) are expensive to make this way, because they need to be held
one way round for threading, then rotates to turn the acorn. This
makes them cost several times what a plain nut does.

This type of cheap acorn nut is pressed from thin sheet. A hole is
punched and drawn into a rough funnel, which can be threaded. A
"flower" shape is then blanked out and the petals bent together to
form the acorn.

And -- if you want to see what the other type looks like, check
out the following URL:

http://www2.d-and-d.com/misc/NUTS/acorn-nuts.jpg

This particular one has a 1/2-20 thread, so it is significantly larger
than the one shown in the puzzle, as well as higher quality.

It is a quick-and-dirty setup -- just the one image cropped to
reasonable size. No text, no description.

FWIW -- this is a pair out of the box which I had to order to
obtain one for the handwheel on my Clausing tailstock. It had the thin
lock nut, but no acorn nut, which led to it working loose regularly, and
to occasionally gouging my wrist. I'll figure out other uses for the
rest of the box. :-)

Enjoy,
DoN.

P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway? And what newsgroup are you following this
in? I'm in rec.crafts.metalworking, which explains why I am
familiar with the acorn nuts, and why I happen to have some on
hand to photograph.
--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

260 A Hollow Auger used to make round tenons

* DoN. Nichols

http://www2.d-and-d.com/misc/NUTS/acorn-nuts.jpg

....
P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway? And what newsgroup are you following this
in? I'm in rec.crafts.metalworking, which explains why I am
familiar with the acorn nuts, and why I happen to have some on
hand to photograph.


Thanks to you and Andy. What they are called in Norway? Frankly, I
don't really know, but I'll check it out. (I really was puzzled
because my dictionary told me that an "acorn" should be an "oak nut",
so what the h... should a "metal oak nut nut of cheap varity" be? :-))

Anyway, the newsgroup I follow is rec.puzzles.

--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway,
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92

In article ,
Jon Haugsand wrote:
* DoN. Nichols

http://www2.d-and-d.com/misc/NUTS/acorn-nuts.jpg

...
P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway? And what newsgroup are you following this
in? I'm in rec.crafts.metalworking, which explains why I am
familiar with the acorn nuts, and why I happen to have some on
hand to photograph.


Thanks to you and Andy. What they are called in Norway? Frankly, I
don't really know, but I'll check it out. (I really was puzzled
because my dictionary told me that an "acorn" should be an "oak nut",
so what the h... should a "metal oak nut nut of cheap varity" be? :-))

I can see how that would be rather puzzling. The name is
because the rounded end resembles the actual nut, and the hex part for
wrenching it tight (vaguely) resembles the cap which is found on the
acorn.

Anyway, the newsgroup I follow is rec.puzzles.

Thank you. That suggests a background which probably would not
offer you experience with acorn nuts. The woodworkers in the
cross-posting list might know the acorn nuts. The antiques people might
deal with them if they collect old tools and such.

Enjoy,
DoN.


--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---

R.H. wrote:

"Andy Dingley" wrote in message
...

On Thu, 10 Feb 2005 20:20:28 +0800, Jonathan Wilson
wrote:


268 looks like a bayonet

Lee Enfield No 4 (British, late WW2)


Correct.
Even the fact its a late one! The earlier one was cruciform in cross
section and much less prone to bending in use....

Niel.

On Fri, 11 Feb 2005 17:40:27 +0000, R.H. wrote:

"Luigi Zanasi" wrote in message
news I wanted to mention that when the bottle is put over one of the small ends,
it is then pushed against the wire which opens a valve to release water,
when the bottle is removed the wire is returned to it's previous position by
a spring.

Correct.

Note that it is pictured upside down.
--
Luigi
who could not resist

* DoN. Nichols
P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?

Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway,
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92

Jon Haugsand wrote:
* DoN. Nichols

P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?


Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

Ok, I have to ask. Is the same word for nut
also slang for testicle?

* Jim Stewart
Jon Haugsand wrote:
* DoN. Nichols

P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?
Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

Ok, I have to ask. Is the same word for nut
also slang for testicle?

Well, as nut have several meanings in English, and those translate
into different words in Norwegian, not all of them are slang for
testicle. "Mutter" is the Norwegian word for "nut" as in "nuts and
bolts". "Nøtt" (i.e. "Nott" with a slash through the o) is the word
for the edible "nut" as in "hazzle nut" or "oak nut". The latter,
"nøtt", are sometimes used as slang for testicle, but not very
common. (So many others to use, "familiejuveler" (family jewels),
"baller" (balls), and so on.) (OT: My first cousing got married in
California a few years ago. The wedding menu was Norwegian fish
balls, which is shocking by itself as this is the cheapest dinner
varity you can get in Norway. As the wedding guests line up a man
said "Huh, huh, I didn't know that fish had balls." Lady in front:
"It must be large fish though.")

--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway,
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92

* Jim Stewart
Jon Haugsand wrote:
* DoN. Nichols

P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?
Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

Ok, I have to ask. Is the same word for nut
also slang for testicle?

Well, as nut have several meanings in English, and those translate
into different words in Norwegian, not all of them are slang for
testicle. "Mutter" is the Norwegian word for "nut" as in "nuts and
bolts". "Nøtt" (i.e. "Nott" with a slash through the o) is the word
for the edible "nut" as in "hazzle nut" or "oak nut". The latter,
"nøtt", is sometimes used as slang for testicle, but not very common.
(So many others to use, "familiejuveler" (family jewels), "baller"
(balls), and so on.) (OT: My first cousing got married in California
a few years ago. The wedding menu was Norwegian fish balls, which is
shocking by itself as this is the cheapest dinner varity you can get
in Norway. When the wedding guests lined up, a man said "Huh, huh, I
didn't know that fish had balls." Lady in front: "It must be large
fish though.")

--
Jon Haugsand
Dept. of Informatics, Univ. of Oslo, Norway,
http://www.ifi.uio.no/~jonhaug/, Phone: +47 22 85 24 92

Jon Haugsand wrote:
* Jim Stewart

Jon Haugsand wrote:

* DoN. Nichols


P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?

Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

Ok, I have to ask. Is the same word for nut
also slang for testicle?


Well, as nut have several meanings in English, and those translate
into different words in Norwegian, not all of them are slang for
testicle. "Mutter" is the Norwegian word for "nut" as in "nuts and
bolts". "Nøtt" (i.e. "Nott" with a slash through the o) is the word
for the edible "nut" as in "hazzle nut" or "oak nut". The latter,
"nøtt", are sometimes used as slang for testicle, but not very
common. (So many others to use, "familiejuveler" (family jewels),
"baller" (balls), and so on.) (OT: My first cousing got married in
California a few years ago. The wedding menu was Norwegian fish
balls, which is shocking by itself as this is the cheapest dinner
varity you can get in Norway. As the wedding guests line up a man
said "Huh, huh, I didn't know that fish had balls." Lady in front:
"It must be large fish though.")

LOL

In article ,
Jon Haugsand wrote:
* DoN. Nichols
P.S. Out of curiosity -- now that you have images, what is the term
for them in Norway?

Have now found out. Some call it "kuppelmutter" i.e. "domed nut" and
some "hettemutter" or "hooded nut".

Both reasonable terms, and probably easier for someone with just
a dictionary for translation to understand.

Thanks,
DoN.

--
Email: | Voice (all times): (703) 938-4564
(too) near Washington D.C. | http://www.d-and-d.com/dnichols/DoN.html
--- Black Holes are where God is dividing by zero ---