Home |
Search |
Today's Posts |
![]() |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
![]() |
|||
|
|||
![]()
For over a year now I've had the Jet 1.5hp dust collector with the
canister filter on top and the clear plastic bags on the bottom. It works well but I frequently have a problem of the bag getting cut and leaking/blowing dust and shavings out. I don't know if it's due to woodturning's sharper off cut chunks that occur when roughing out or just the nature of the beast. Once I spot the ant hill of wood dust and chips on the DC caster platform, I grab the clear packing tape, patch the hole and vac up the escapees. All is good for a while until I spot yet another ant hill forming. After a few times of this I figure it's time for a new bag and the dance goes on. (BTW, I reuse bags since my city accepts the dust and shavings in our "yard recycle" can - but that doesn't seem to be a factor as the brand new bags will often develop cuts in fairly short order.) I've looked into getting industrial drum liners, but at almost $200 per box of 25 or somesuch I've been able to resist. I've also looked at commercially available cans, drums or barrels that will fit in the bag's space and making up some sort of fabric chute between the DC's rim and the can - haven't got a round tuit yet. This afternoon after carefully positioning and religiously repositioning my DC hose to pick up as much shavings and dust as possible directly from some cocobolo I was turning, I noticed after a bit I was only transferring the cocobolo that would have ended up at my feet to a pile on the floor next to the DC. Damn, another cut in the bag. The notion of trying to contain the spillage at that moment fit with my timetable rather than going through the exercise of taping or changing bags. I headed to the garage and emptied the rakes, shovels and pick axe from an old galvanized "shorty" trash can that used to hold dog food but was converted to a standing yard tool holder some years back. It fit perfectly between the uprights of the DC, the swiss-cheese bag was lifted and placed into the can, all the while still attached to the DC, and I turned the thing back on to get back to turning. The bag inflated with the pressurized air just fine and filled the trash can like a balloon. I'm thinking the can will support the bag from being poked through. A happy side-note: the DC is noticeably quieter. That whooshing roar isn't nearly as loud as it used to be. Two Bushies, one rock. ![]() -- Owen Lowe and his Fly-by-Night Copper Company ____ "Sure we'll have fascism in America, but it'll come disguised as 100% Americanism." -- Huey P. Long |
Thread Tools | Search this Thread |
Display Modes | |
|
|
![]() |
||||
Thread | Forum | |||
Jet Canister Dust Collector & Bags | Woodturning | |||
Dust Collectors: A killer health hazard! | Woodworking | |||
Recommend Ducting For JET 1.5 HP Canister Dust Collector | Woodworking | |||
Filtration Rate of Grizzly Canister Dust Collector | Woodworking | |||
FS: [Seattle Area] Jet Dust Collector with Filter Canister DC-1100CK | Woodworking |