Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
|
|||
|
|||
Brass plated steel machine screws, anyone?
I have some bookshelves that use machine screws and cross dowels to
hold their frames together. The machine screws are metric: M6 50mm long, brass plated (antique?) over steel and (here's the real killer) flat head (countersunk). As luck would have it, since moving house I am missing some of the cross dowels and the screws, so I need to find replacements. Ideally I would like to stick with metric fasteners, but here in the USA that seems to be a tall order, so I could switch to 1/4-20 at a pinch. I can find 1/4-20 cross dowels easily enough, but finding a source of brass plated flat head machine screws seems to not be so easy. Can anyone suggest a supplier who might be able to help (ideally staying metric, but going the 1/4-20 route at a pinch)? -- Peter Headland |
#2
|
|||
|
|||
Try LeeValley
http://www.leevalley.com/wood/page.a...urrency=1&SID= Or HomeDepot - the one in my neighborhood has a full selection of metric fastners, but I'm in Canada If there is an Ikea store(www.ikea.com) near you, they too will have them, as most of their fastners are metric - and they use cross dowels in almost everything. Matt wrote in message ups.com... I have some bookshelves that use machine screws and cross dowels to hold their frames together. The machine screws are metric: M6 50mm long, brass plated (antique?) over steel and (here's the real killer) flat head (countersunk). As luck would have it, since moving house I am missing some of the cross dowels and the screws, so I need to find replacements. Ideally I would like to stick with metric fasteners, but here in the USA that seems to be a tall order, so I could switch to 1/4-20 at a pinch. I can find 1/4-20 cross dowels easily enough, but finding a source of brass plated flat head machine screws seems to not be so easy. Can anyone suggest a supplier who might be able to help (ideally staying metric, but going the 1/4-20 route at a pinch)? -- Peter Headland |
#3
|
|||
|
|||
|
#4
|
|||
|
|||
In article et,
Lew Hodgett wrote: wrote: I have some bookshelves that use machine screws and cross dowels to hold their frames together. The machine screws are metric: M6 50mm long, brass plated (antique?) over steel and (here's the real killer) flat head (countersunk). As luck would have it, since moving house I am missing some of the cross dowels and the screws, so I need to find replacements. Go down to you nearest GOOD hardware store that has a good selection of fasteners with sample in hand. Have them special order a box (100 pcs) of what you need. HTH Lew Or try www.jamestowndistributers.com. Truly awesome selection of screws in all sorts of sizes, materials, head styles, etc. If they don't have it, you probably don't need it. |
#6
|
|||
|
|||
Roy Smith wrote:
Or try www.jamestowndistributers.com. They are a marine supplier. They won't have anyting that is brass plated steel. Bronze, 316 S/S, 18-8 S/S, maybe, but never brass plated steel since neither steel or brass are worth a hoot in salt water. HTH Lew |
#8
|
|||
|
|||
Silly question - why do these have to be steel? Would straight brass
work? Good (not silly) question! I realised that the wood (looks like some kind of pine) would tear long before the thread on a 1/4-20 brass screw would ever strip, so I bought some brass screws and the job's a good 'un. My thanks to all of you who replied. -- Peter Headland |
#9
|
|||
|
|||
|
#10
|
|||
|
|||
Brass plated steel machine screws, anyone?
Imperial or metric 6.5 mm is rather close to 1/4" www.mcmaster.com |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Self-Reproducing Machine Tools | Metalworking | |||
Those YUPPIE drywall screws | Home Ownership | |||
Quantum Mechanics and Self-Replicating Machines | Metalworking | |||
Zanussi washing machine - blown program selector | UK diy | |||
Knife Steel FAQ updated | Metalworking |