mostly use my planer as a surface treatment and once complete requires
only a little sanding but i look at a drum sander and think that might
do the job too

with some coarse grit i would expect they could remove a lot of material

anyone have or use a drum sander

could a rough board maybe with paint and dents be quickly taken down

the open drum sander would be great since it allows much wider pieces to
be sanded

almost a doubling of capacity

know they are not silent but they have to be quieter than a planer

On Wednesday, June 28, 2017 at 7:16:51 PM UTC-4, Electric Comet wrote:
mostly use my planer as a surface treatment and once complete requires
only a little sanding but i look at a drum sander and think that might
do the job too

with some coarse grit i would expect they could remove a lot of material

anyone have or use a drum sander

could a rough board maybe with paint and dents be quickly taken down

the open drum sander would be great since it allows much wider pieces to
be sanded

almost a doubling of capacity

know they are not silent but they have to be quieter than a planer

Take a picture of it so we can see how loud it is.

"Electric Comet" wrote in message
news

mostly use my planer as a surface treatment and once complete requires
only a little sanding but i look at a drum sander and think that might
do the job too

with some coarse grit i would expect they could remove a lot of material

anyone have or use a drum sander

Yes

could a rough board maybe with paint and dents be quickly taken down

Yes

On Thu, 29 Jun 2017 07:57:37 -0400
"dadiOH" wrote:

Yes

good and it seems to be much quieter than a planer

https://www.youtube.com/embed/yHy47X434rc

even spiral cut planers

"Electric Comet" wrote in message
news
On Thu, 29 Jun 2017 07:57:37 -0400
"dadiOH" wrote:

Yes

good and it seems to be much quieter than a planer

It is, the necessary dust collector isn't.

A drum sander and a planer functionally overlap, but while
there are tasks suitable to both, many tasks are only
suitable for one or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

Nor would one use the planer for fine surface prep.

On 6/29/2017 2:09 PM, Scott Lurndal wrote:
A drum sander and a planer functionally overlap, but while
there are tasks suitable to both, many tasks are only
suitable for one or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

Nor would one use the planer for fine surface prep.


Precisely on all counts. I have both and both do their jobs but not the
others jobs.

"Scott Lurndal" wrote in message
news
A drum sander and a planer functionally overlap, but while
there are tasks suitable to both, many tasks are only
suitable for one or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

What is a "significant amount"? I've done at least 1000+ board feet with
mine. Not all at once, just whatever I needed for the current project.

dadiOH wrote:

"Scott Lurndal" wrote in message
news
A drum sander and a planer functionally overlap, but while
there are tasks suitable to both, many tasks are only
suitable for one or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

What is a "significant amount"? I've done at least 1000+ board feet with
mine. Not all at once, just whatever I needed for the current project.




Do you have both a drum sander and planer/thicknesses to compare ? I have
a 15" stationary thicknesses and a 22/44" drum sander. The thicknesses
removes material about 15 times faster than the drum sander, but the
surface has to be sanded for final prep. It takes about 4 passes to remove
1/16" with my drum sander and each pass take 2-4 times longer than with
the thicknesses.

"Leon" wrote in message
...
dadiOH wrote:

"Scott Lurndal" wrote in message
news
A drum sander and a planer functionally overlap, but while
there are tasks suitable to both, many tasks are only
suitable for one or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

What is a "significant amount"? I've done at least 1000+ board feet with
mine. Not all at once, just whatever I needed for the current project.




Do you have both a drum sander and planer/thicknesses to compare ? I have
a 15" stationary thicknesses and a 22/44" drum sander. The thicknesses
removes material about 15 times faster than the drum sander, but the
surface has to be sanded for final prep. It takes about 4 passes to
remove
1/16" with my drum sander and each pass take 2-4 times longer than with
the thicknesses.

No to planer and I am sure it is faster. As to how much I can remove per
pass with the sander, depends on what wood and how wide. Using 40 grit
abrasive, I could easily take off 1/16" at full speed on a 4" wide piece of
butternut in one pass. To do the same on 12" oak would take 2, maybe 3,
passes at around half speed.

On 6/30/17 6:25 AM, Leon wrote:
dadiOH wrote:

"Scott Lurndal" wrote in message
news
A drum sander and a planer functionally overlap, but while there
are tasks suitable to both, many tasks are only suitable for one
or the other.

One cannot reasonably replace a planer with a drum sander,
particularly for surfacing roughsawn lumber in any significant
amount.

What is a "significant amount"? I've done at least 1000+ board
feet with mine. Not all at once, just whatever I needed for the
current project.




Do you have both a drum sander and planer/thicknesses to compare ? I
have a 15" stationary thicknesses and a 22/44" drum sander. The
thicknesses removes material about 15 times faster than the drum
sander, but the surface has to be sanded for final prep. It takes
about 4 passes to remove 1/16" with my drum sander and each pass take
2-4 times longer than with the thicknesses.


I'd also take into consideration the wear on the sanding sleeves or
belts or whatever they're called.
You can removed exponentially more material per blade change than you
can per sleeve change.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
www.mikedrums.com