Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Poly question
Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber.
|
#2
Posted to rec.woodworking
|
|||
|
|||
Poly question
On Monday, March 27, 2017 at 11:41:16 PM UTC-5, Gramps' shop wrote:
Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber. Water over poly? One way to make sure you have no interaction is to put a coat of Ultra Blond shellac on the Watco, then top with your water based poly. |
#3
Posted to rec.woodworking
|
|||
|
|||
Poly question
"Gramps' shop" wrote in message ... Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber. Yes if you wait until the Watco is totally cured. At least a month to be safe. |
#4
Posted to rec.woodworking
|
|||
|
|||
Poly question
On Tue, 28 Mar 2017 03:32:18 -0700, Dr. Deb wrote:
Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber. Water over poly? One way to make sure you have no interaction is to put a coat of Ultra Blond shellac on the Watco, then top with your water based poly. That depends on how much yellowing is too much. I haven't found a shellac yet that doesn't leave at least a slight yellowing, although with some it's very slight. Much less than an oil based finish. If that's acceptable, you're fine to use it. Just be sure it's de-waxed. -- What if a much of a which of a wind gives the truth to summer's lie? |
#5
Posted to rec.woodworking
|
|||
|
|||
Poly question
On 3/27/2017 11:41 PM, Gramps' shop wrote:
Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber. IIRC Watco is oil based? You "may" already have all the yellow you are going to get. |
#6
Posted to rec.woodworking
|
|||
|
|||
Poly question
On Tuesday, March 28, 2017 at 12:41:16 AM UTC-4, Gramps' shop wrote:
Can I apply a water based poly over Watco? I want a clear coat and oil based poly tends to run to amber. I've had limited success in this instance by sticking with the Oil-- but using General Finish's Wipe-on Poly instead of a full poly. Especially since the wood already has protection from the Watco, you may be satisfied with a lighter-durability clear coat. This is not my usual technique, only when I REALLY want to limit the yellowing and still prefer the oil for one reason or another. (Oh, who am I kidding...I always prefer the oil, for all the known reasons!) Hope that helps. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Question on mixing stains w/poly | Woodworking | |||
Water base Poly question | Woodworking | |||
Indesit WG924G poly v-belt question | UK diy | |||
Poly Question | Woodworking | |||
Poly question | Woodworking |