Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Wood Glue penetration an bonding.
In rereading sealers and end grain, about over sanding =less
penetration, I started to wonder about gluing. Found his article and wondered about your experiences in the subject. http://www.franklinadhesivesandpolym...z.pdf?sfvrsn=0 Advice on Gluing for furniture, etc. Read another from tite bond and their opinion was the more it was sanded for a .02 to .06 Smoothness the better otherwise the wood would be too gappy with fibres to get a good bond. Then epoxy is better. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Solderless copper bonding glue? | UK diy | |||
Bonding (glue?) Q | Home Repair | |||
Bonding wood to plaster(board) | UK diy | |||
Cyanoacryiate Bonding glue | UK diy | |||
white glue vs wood glue | Woodworking |