Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
What would be a reasonable price for these 2 lots of wood?
I'm just looking for a rough number, knowing that there are a lot of factors that may impact the price. If there is any info that I can provide that might help with the estimate, just let me know. The listing for both lots reads: "Old growth (tight grain) reclaimed Douglas fir" First Lot: S4S 33 Boards Actual sizes: 1 1/8 x 4 1/2 6 boards are between 73" and 88" The remaining 27 are random lengths between 36" - 48" https://images.craigslist.org/00m0m_...0_1200x900.jpg https://images.craigslist.org/00D0D_...O_1200x900.jpg Second Lot: There are 5 Lots in the 2 images below, I am interested in Lot #3 only Rough Sawn Actual sizes: 1 at 1 1/2 x 6 x 177 2 at 1 1/2 x 5 1/2 x 193 2 pieces of fire wood, 36" & 48" https://images.craigslist.org/00f0f_...Y_1200x900.jpg https://images.craigslist.org/01111_...3_1200x900.jpg Let the bidding wars begin! ;-) |
#2
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
On Wednesday, June 8, 2016 at 9:04:06 PM UTC-5, DerbyDad03 wrote:
What would be a reasonable price for these 2 lots of wood? What's the going rate, per bd ft, in your area? This may not reflect "old growth" prices. https://hardwoodstore.com/lumber-prices First Lot looks like about 53 bd ft. These boards appear to be quarter sawn, desireable. Second Lot looks like about 41 bd ft. These boards are not quarter sawn. These boards don't seem to be rough sawn, but just used & abused milled lumber, needing cleaning up. I would think the First Lot may be the better lot, overall. I'd buy this lot on the basis of bd ft or linear ft. Maybe, make an offer of $2-$3 bd ft, or $1.50 ln ft, see what happens? I'd buy the Second Lot on the basis of each individual board.... Make an offer of, maybe, $10-$13-$15(?) for each longer board and $1(?) for each the firewood. The only thing going for these boards, as opposed to the First Lot, is that they are 1.5" X 6" wide, if that aspect is more desireable for your project. Sonny |
#3
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
On Thursday, June 9, 2016 at 1:03:18 PM UTC-4, Sonny wrote:
On Wednesday, June 8, 2016 at 9:04:06 PM UTC-5, DerbyDad03 wrote: What would be a reasonable price for these 2 lots of wood? What's the going rate, per bd ft, in your area? This may not reflect "old growth" prices. https://hardwoodstore.com/lumber-prices First Lot looks like about 53 bd ft. These boards appear to be quarter sawn, desireable. Second Lot looks like about 41 bd ft. These boards are not quarter sawn. These boards don't seem to be rough sawn, but just used & abused milled lumber, needing cleaning up. I would think the First Lot may be the better lot, overall. I'd buy this lot on the basis of bd ft or linear ft. Maybe, make an offer of $2-$3 bd ft, or $1.50 ln ft, see what happens? I'd buy the Second Lot on the basis of each individual board.... Make an offer of, maybe, $10-$13-$15(?) for each longer board and $1(?) for each the firewood. The only thing going for these boards, as opposed to the First Lot, is that they are 1.5" X 6" wide, if that aspect is more desireable for your project. Sonny Sorry about the Rough Sawn terminology. All of the wood was left over from a post and beam house project. All of the wood was reclaimed by the company that built the house. The long boards were never surfaced. The first lot was surfaced to use as interior casing, but was cut to the wrong size and sat in the homeowner's basement for 15 years Actually, I want both lots and (at least at this point) the seller does not want to break up the lots. When I first saw the ad, I was hoping that the long S4S boards would only need to be cut to length to become the frame (side, foot and head rails) for a full size bed. Then I realized that they were only 4 1/2 inches, which I think are too narrow for rails of that size bed. The 6" wide boards, once they are cleaned up, will be fine for the rails themselves and the S4S boards will be used for the mattress supports, head board, legs, etc. I'll have a lot left over, but that's OK. Your numbers put me very close to what I was going to offer for both lots, which is less than he wants for the 2 lots separately. Thanks for the estimate. |
#4
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
Seems Lot 3 is sold.
From what I understand, chestnut is really desireable, despite it being softer than Douglas fir. If you're in the area, maybe inquire/check out the West Sparta cache. You might be able to specifically select what and how much you want. Doesn't hurt to offer a bit less, per bd ft, also. Select, so as not to have any waste, if possible. https://rochester.craigslist.org/sea...query=chestnut Sonny |
#5
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
On Thursday, June 9, 2016 at 2:30:17 PM UTC-4, Sonny wrote:
Seems Lot 3 is sold. How did you determine that? |
#6
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
On Thursday, June 9, 2016 at 2:34:20 PM UTC-5, DerbyDad03 wrote:
On Thursday, June 9, 2016 at 2:30:17 PM UTC-4, Sonny wrote: Seems Lot 3 is sold. How did you determine that? I Googled "new york craigslist douglas fir", then, on the Rochester materials listings, I searched for Douglas fir. https://rochester.craigslist.org/mat/5610625563.html It does state this posting was posted 10 days ago and I don't see an original posting 10 days, or so, ago. Sonny |
#7
Posted to rec.woodworking
|
|||
|
|||
How Much Would You Pay For This Reclaimed Douglas Fir?
On 6/8/2016 10:04 PM, DerbyDad03 wrote:
What would be a reasonable price for these 2 lots of wood? I'm just looking for a rough number, knowing that there are a lot of factors that may impact the price. If there is any info that I can provide that might help with the estimate, just let me know. The listing for both lots reads: "Old growth (tight grain) reclaimed Douglas fir" First Lot: S4S 33 Boards Actual sizes: 1 1/8 x 4 1/2 6 boards are between 73" and 88" The remaining 27 are random lengths between 36" - 48" https://images.craigslist.org/00m0m_...0_1200x900.jpg https://images.craigslist.org/00D0D_...O_1200x900.jpg Second Lot: There are 5 Lots in the 2 images below, I am interested in Lot #3 only Rough Sawn Actual sizes: 1 at 1 1/2 x 6 x 177 2 at 1 1/2 x 5 1/2 x 193 2 pieces of fire wood, 36" & 48" https://images.craigslist.org/00f0f_...Y_1200x900.jpg https://images.craigslist.org/01111_...3_1200x900.jpg Let the bidding wars begin! ;-) In my opinion, and it's really not that educated, but they don't look like the old growth doug fir I have, which has much tighter rings. Those look like SYP and fast growing stuff. Not all of it, but from what I can see. -- Jeff |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Douglas Fir | UK diy | |||
CVG Douglas Fir Source | Woodworking | |||
CVG Douglas Fir Source | Home Repair | |||
Clear Douglas Fir ??? | Woodworking | |||
Douglas Fir difficulty | Woodturning |