Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
I've cut dados into 2 X 4 construction timber frames (lap joints) for polycarbonate sections for a greenhouse-type structure (actually, a solar wood kiln). I'm going to paint the frames before I assemble, but while I'm at Home Depot to get the paint, I going to get some calk to seal the frame (wood to polycarbonate) and I don't know if your basic DAP polymer sealant is going to do the job. I don't know if polycarbonate requires a special product, and I'm guessing the structure is going to get pretty warm in the summer.
Thanks. |
#2
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
Michael wrote:
I've cut dados into 2 X 4 construction timber frames (lap joints) for polycarbonate sections for a greenhouse-type structure (actually, a solar wood kiln). I'm going to paint the frames before I assemble, but while I'm at Home Depot to get the paint, I going to get some calk to seal the frame (wood to polycarbonate) and I don't know if your basic DAP polymer sealant is going to do the job. I don't know if polycarbonate requires a special product, and I'm guessing the structure is going to get pretty warm in the summer. Thanks. This seems more like a question about caulk than polycarbonate. Of course, the latter scratches easily, which may be a factor in your long term satisfaction. Suggest you investigate the types of caulk available. |
#3
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
On 6/27/2014 12:22 PM, Michael wrote:
Have this on my iPhone/iPad wherever I go: http://www.palramamericas.com/docs/f...patibility.pdf -- eWoodShop: www.eWoodShop.com Wood Shop: www.e-WoodShop.net https://www.google.com/+eWoodShop https://plus.google.com/+KarlCaillouet/posts http://www.custommade.com/by/ewoodshop/ KarlCaillouet@ (the obvious) |
#4
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
On Friday, June 27, 2014 1:28:34 PM UTC-5, Swingman wrote:
On 6/27/2014 12:22 PM, Michael wrote: Have this on my iPhone/iPad wherever I go: http://www.palramamericas.com/docs/f...patibility.pdf -- eWoodShop: www.eWoodShop.com Wood Shop: www.e-WoodShop.net https://www.google.com/+eWoodShop https://plus.google.com/+KarlCaillouet/posts http://www.custommade.com/by/ewoodshop/ KarlCaillouet@ (the obvious) Perfect. Thanks, Swingman! Great info. |
#5
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
On Friday, June 27, 2014 1:28:34 PM UTC-5, Swingman wrote:
On 6/27/2014 12:22 PM, Michael wrote: Have this on my iPhone/iPad wherever I go: http://www.palramamericas.com/docs/f...patibility.pdf WOW! Probably one of the most useful charts I have seen on the net in years! Thanks for that one, Karl. As you know I do a lot of waterproofing, roofing, and repairs. Sealants are a big part of what I do for not on those tasks but for upgrades. When I replace glass in certain instances, I use polycarbonate. If I am working on a residential home door that has glass panels near a lock, I always replace with polycarbonate. And yet, never have I seen that chart or one like it. Really great stuff. I am wondering, do you think this Note that many of those sealants in the description are silicone or acrylic based. The poly is too hard, chemical resistant and smooth for long term adhesion. It shrinks a tiny bit, the dirt gets in the joints and holds moisture and the joint fails. Most silicone sealants are not strongly UV resistant, and most acrylics are only mildly so. Locally, we are using a BASF product, either Sonneborn NP1 or Sonolastic, depending on the engineering specs. Check this out: http://www.bondedmaterials.net/assets/data/basf_np1.pdf It will stick to just about any substrate if it is clean, is almost inert when applied, heat does not affect its performance at all, left as applied has extreme UV resistance, can be painted (only after about two weeks), and has an elasticity factor of an incredible 35%! We use it on everything. The downside? In the right hands a nice bead looks OK. It is always colored, there is no "clear" so it is always noticeable. It is really difficult to apply when cold, and cleanup can be a real bitch. Allowed to dry, it is almost impossible to get off any surface including the adjoining areas where you are working, and must be CUT off your tools. Once dry it is impervious to most solvents. It has a short shelf life, so must be purchased as needed; I throw a few tubes a year away that have hardened in my truck tool box over the summer. Also, at $8 a tube, you don't just slather it anywhere, nor do you keep much on hand. But for what it does, it is great. I have never seen your chart. I hang onto anything that makes me look like I know what I am doing, so that one goes in the file. Thanks! Robert |
#7
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
Check out SikaFlex.
Have offices in USA as well Europe. Their tech support is in Detroit, are top notch and have 800#. They have products for the industrial as well as the marine markets. I used a ton of their products building boat. Have an extensive network of stocking distributors. Lew --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
#8
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
wrote It has a short shelf life, so must be purchased as needed; I throw a few tubes a year away that have hardened in my truck tool box over the summer. Don't throw that stuff away. Cut the tube off of the hardened caulk. What you now have is a new sander cleaning stick. It works as well as the ones you buy, I'll bet. -- Jim in NC --- This email is free from viruses and malware because avast! Antivirus protection is active. http://www.avast.com |
#9
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
On Friday, June 27, 2014 10:22:36 AM UTC-7, Michael wrote:
I've cut dados into 2 X 4 construction timber frames (lap joints) for polycarbonate sections for a greenhouse-type structure (actually, a solar wood kiln). I'm going to paint the frames before I assemble, but while I'm at Home Depot to get the paint, I going to get some calk to seal the frame (wood to polycarbonate) and I don't know if your basic DAP polymer sealant is going to do the job. I don't know if polycarbonate requires a special product, and I'm guessing the structure is going to get pretty warm in the summer.. Thanks. Any exterior caulk they sell at the big box store will do the job. Silicon sticks to anything. |
#10
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
On 6/27/2014 12:22 PM, Michael wrote:
I've cut dados into 2 X 4 construction timber frames (lap joints) for polycarbonate sections for a greenhouse-type structure (actually, a solar wood kiln). I'm going to paint the frames before I assemble, but while I'm at Home Depot to get the paint, I going to get some calk to seal the frame (wood to polycarbonate) and I don't know if your basic DAP polymer sealant is going to do the job. I don't know if polycarbonate requires a special product, and I'm guessing the structure is going to get pretty warm in the summer. Thanks. I have found the Butyl Robber sealant to hold up well and have great stretch characteristics. http://www.dap.com/product_details.a...=32&SubcatID=6 |
#11
Posted to rec.woodworking
|
|||
|
|||
Type of caulking for polycarbonate
Leon lcb11211@swbelldotnet wrote in
: On 6/27/2014 12:22 PM, Michael wrote: I've cut dados into 2 X 4 construction timber frames (lap joints) for polycarbonate sections for a greenhouse-type structure (actually, a solar wood kiln). I'm going to paint the frames before I assemble, but while I'm at Home Depot to get the paint, I going to get some calk to seal the frame (wood to polycarbonate) and I don't know if your basic DAP polymer sealant is going to do the job. I don't know if polycarbonate requires a special product, and I'm guessing the structure is going to get pretty warm in the summer. Thanks. I have found the Butyl Robber sealant to hold up well and have great stretch characteristics. http://www.dap.com/product_details.a...=32&SubcatID=6 Polycarbonate is sensitive to many common solvents used in caulks and sealants. You need to check the MSDS sheet of the proposed sealent against the polycarbonate sheet manufacturer's technical guide if you want to avoid microcracking and rapid degradation along the edge of the sealent bead. The problem is significantly worse if exposed to UV. However neutral cure silicones are generally safe. Polycarbonate also has a high coefficient of thermal expansion so if the grooves are too tight it will sheer the sealent. If loose enough to allow for expansion, you then have the problem of shimming each sheet in place so it is centered in the groove and doesn't bottom out anywhere. -- Ian Malcolm. London, ENGLAND. (NEWSGROUP REPLY PREFERRED) ianm[at]the[dash]malcolms[dot]freeserve[dot]co[dot]uk [at]=@, [dash]=- & [dot]=. *Warning* HTML & 32K emails -- NUL |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Polycarbonate Roofing | UK diy | |||
Milling polycarbonate | Metalworking | |||
What type of caulking to use on Pop up trailer seams? Silicone? | Home Repair | |||
Lexan polycarbonate Source... | Woodworking | |||
polycarbonate | Home Repair |