Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Ping: spray lacquer experts
I used some Deft rattle can semi-gloss on two turned bowls. Three light coats with 30 minutes drying time between coats, per the instructions on the can. The bowls are not quite as smooth as they were before spraying. I have some micromesh pads, equivalent to 1000 grit. Question: if I give the bowls a light sanding with the micromesh am I going to muck up my lacquer work?
BTW -- first time I've used spray lacquer and I sure like the look!! Larry |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Tips for spray lacquer | Woodworking | |||
Ping: Boiler Experts | UK diy | |||
PING Renata lacquer supplier | Woodworking | |||
Cellulose lacquer spray cans? | UK diy | |||
FS: Target Ultima Spray Lacquer 2gal | Woodworking |