Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
http://www.liveleak.com/view?i=e7b_1366565172
I really like this, wish I could do that too... but then again I dont really need it |
#2
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
On 4/22/2013 4:03 AM, Sonnich Jensen wrote:
http://www.liveleak.com/view?i=e7b_1366565172 I really like this, wish I could do that too... but then again I dont really need it It is amazing that modern man is finally figuring our they can do things without electricity and build tools like our ancestors have done for the last several centuries. I guess that is the reason the the PBS show the Woodwright has been on TV for the last 40 years. I got hooked in the show where he went out into the woods and cut an oak tree. He cut a section from the trunk the length he needed and then proceeded to SPLIT out the two 2X8 that he needed. My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. |
#3
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote:
My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. Paul T. |
#4
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
On 4/22/2013 10:16 AM, PHT wrote:
On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote: My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. Paul T. Blacksmithing has made some what of a come back even though it will never be what it was in the 1900's. Yes there is a large need for the shoeing of horses, and you can usually find one around a horse show. The other place to find blacksmiths is the many historical recreations and historical sites. If you go to some place like Feast of the Harvest Moon in Lafayette Indiana you will find a dozen working blacksmiths. Some with a simple forge to some very sophisticate set up. Many historical sites, have a working blacksmith shops, examples are Marbry Mill on the Blue Ridge Parkway, Connor Prairie in Indiana, Tryon Place in New Bern NC, and many similar sites. While they practice the historic profession, their main products are hinges, and other simple iron items. I believe I saw one where they were making an iron fence. In some historical sites, they do the larger task, such as wagon repair and construction and other Blacksmithing project to maintain the site and the historical accuracy. |
#5
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
"Keith Nuttle" wrote in message ...
On 4/22/2013 10:16 AM, PHT wrote: On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote: My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. Paul T. Blacksmithing has made some what of a come back even though it will never be what it was in the 1900's. Yes there is a large need for the shoeing of horses, and you can usually find one around a horse show. The other place to find blacksmiths is the many historical recreations and historical sites. If you go to some place like Feast of the Harvest Moon in Lafayette Indiana you will find a dozen working blacksmiths. Some with a simple forge to some very sophisticate set up. Many historical sites, have a working blacksmith shops, examples are Marbry Mill on the Blue Ridge Parkway, Connor Prairie in Indiana, Tryon Place in New Bern NC, and many similar sites. While they practice the historic profession, their main products are hinges, and other simple iron items. I believe I saw one where they were making an iron fence. In some historical sites, they do the larger task, such as wagon repair and construction and other Blacksmithing project to maintain the site and the historical accuracy. I know quite a number of blacksmiths... Some from my time working in the gunsmith shop at Colonial Williamsburg. There are three blacksmiths within 5 miles or so of me right now. Two do commercial commissions and the third is pretty much retired now being in his late 70s. Peter Ross was master of the blacksmith shop at Williamsburg when I worked there http://peterrossblacksmith.com/. Roy Underhill has had him on the Woodwright's Shop numerous times. I just posted some photos to abpw of some kitchen cabinets made from solid crotch walnut with hand forged hinges, etc. These reside in one of my friend's home in VA whom I visited this past summer on my bicycle trip from FL to NY. My friend was a gunsmith at Williamsburg and held other skilled positions at Williamsburg prior to his retirement. John P.S. If you want to read about my trip... http://www.crazyguyonabike.com/doc/RVW2013 |
#6
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
On 10/3/2013 5:11 PM, John Grossbohlin wrote:
"Keith Nuttle" wrote in message ... On 4/22/2013 10:16 AM, PHT wrote: On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote: My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. Paul T. Blacksmithing has made some what of a come back even though it will never be what it was in the 1900's. Yes there is a large need for the shoeing of horses, and you can usually find one around a horse show. The other place to find blacksmiths is the many historical recreations and historical sites. If you go to some place like Feast of the Harvest Moon in Lafayette Indiana you will find a dozen working blacksmiths. Some with a simple forge to some very sophisticate set up. Many historical sites, have a working blacksmith shops, examples are Marbry Mill on the Blue Ridge Parkway, Connor Prairie in Indiana, Tryon Place in New Bern NC, and many similar sites. While they practice the historic profession, their main products are hinges, and other simple iron items. I believe I saw one where they were making an iron fence. In some historical sites, they do the larger task, such as wagon repair and construction and other Blacksmithing project to maintain the site and the historical accuracy. I know quite a number of blacksmiths... Some from my time working in the gunsmith shop at Colonial Williamsburg. There are three blacksmiths within 5 miles or so of me right now. Two do commercial commissions and the third is pretty much retired now being in his late 70s. Peter Ross was master of the blacksmith shop at Williamsburg when I worked there http://peterrossblacksmith.com/. Roy Underhill has had him on the Woodwright's Shop numerous times. I just posted some photos to abpw of some kitchen cabinets made from solid crotch walnut with hand forged hinges, etc. These reside in one of my friend's home in VA whom I visited this past summer on my bicycle trip from FL to NY. My friend was a gunsmith at Williamsburg and held other skilled positions at Williamsburg prior to his retirement. John P.S. If you want to read about my trip... http://www.crazyguyonabike.com/doc/RVW2013 Very cool. Bookmarked it on my iPad and taking it to bed tonight for a proper read. Looks great. Thanks for the heads-up. Nova recently did a show of a blacksmith/swordsmith reverse engineering a viking sword, pretty interesting if you've ever done any banging on hot metal yourself: http://www.pbs.org/wgbh/nova/ancient...ing-sword.html -- eWoodShop: www.eWoodShop.com Wood Shop: www.e-WoodShop.net https://plus.google.com/114902129577517371552/posts http://www.custommade.com/by/ewoodshop/ KarlCaillouet@ (the obvious) |
#7
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
"John Grossbohlin" wrote:
P.S. If you want to read about my trip... http://www.crazyguyonabike.com/doc/RVW2013 Enjoyable read, highly recommended. "It's now an entertainment, sound bite and tweet world... not much depth to it." Seems to be that way almost everywhere. -- www.ewoodshop.com (Mobile) |
#8
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
"PHT" wrote in message news On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote: My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. ================================================== ============================= There are plenty of working blacksmiths around. |
#9
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
"CW" wrote in
: *snip* There are plenty of working blacksmiths around. There are also plenty of hobbyist blacksmiths around too. They're probably like woodworkers, you wouldn't be able to tell them on the street but in their work space there's a pretty nice set up. Puckdropper -- Make it to fit, don't make it fit. |
#10
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
"Puckdropper" wrote in message b.com... "CW" wrote in : *snip* There are plenty of working blacksmiths around. There are also plenty of hobbyist blacksmiths around too. They're probably like woodworkers, you wouldn't be able to tell them on the street but in their work space there's a pretty nice set up. ================================================== ======================== True. I used to be one. |
#11
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
PHT wrote:
On Mon, 22 Apr 2013 08:59:38 -0400, Keith Nuttle wrote: My grandfather was a blacksmith, and I have one of his tongs that he made to fit his hand. (Missing finger) It is bent so the one arm neatly fits into the hole caused by the missing finger. With the bend he could use the tongs with one hand while he used the hammer with the other. About the closest anybody comes to being a blacksmith nowadays is those that shoe horses. That's a farrier. In the past this was done the the blacksmith. Most all iron work nowadays is done with machines. When I was in high school (many years ago) we was required to do some items using a forge as a blacksmith would. It was a something you did not forget. Paul T. -- Bill In Hamptonburgh, NY In the original Orange County. Est. 1683 To email, remove the double zeros after @ |
#12
Posted to rec.woodworking
|
|||
|
|||
Building tools (video)
http://www.liveleak.com/view?i=e7b_1366565172
I really like this, wish I could do that too... but then again I dont really need it Sonnich Jensen That was a really great video. Thanks for sharing. I admire that guy's reuse of tools and creativity. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Where You Can Buy Made in America Building Products - ABC News Video(plus complete list of suppliers) | Woodworking | |||
Cool Metal Working Video: Building The Worlds Largest Truck | Metalworking | |||
Building with Hand Tools | Woodworking | |||
New Hock tools VIDEO! | Woodworking | |||
Babes and Power Tools (video) | Woodworking |