Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Quick Electrial Question
Am try to install new garbage disposal and have a quick electrical quesiton.
GD Unit came with (3-prong) electrical cord attached. Unfortunately the cord does not seem to be removable. Can I cut off the plug and attach this to the romex in my junction box? I suspect the answer is no, but I have to ask. If this is not acceptable, I think the next solution is to install a new electrical outlet under the sink... BTW, whoever installed the last one wasn't too A-R about it: there were no "romex connectors" going into the junction box, coming out the junction box, or going into the garbage disposal unit. *Scotch tape* was used to cover the sharp edges on the knock-outs on the junction box.... : ( Thank you, Bill |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Various electrial questions | UK diy | |||
3 way electrial wall switch question | Home Repair | |||
Electrial Question | Home Repair | |||
New Electrial outlets in | Home Repair | |||
New Electrial outlets in Basement | Home Repair |