Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
And figured out what I did wrong. I'm building a Custom Printer Cabinet for
a customer. She wanted it painted white to match the decor of her office. When it came time to paint I made the mistake of painting the inside of the cabinets first then within 5 to 10 minutes went back and painted the face frame. It seemed like the way to go. But when it dried I noticed the face frames was nice and smooth and looked great the inside of the cabinet were rough. I figured out what I did wrong. The Paint on the inside of cabinet had started to dry when I started spraying the face frame and the over spray was hitting the already sprayed inside causing a dry coating. I sanded the cabinet today and resprayed. Started on the inside and worked to the outside hitting the face frame then moving to the next opening and working my way out to the face frame. All looks great now Just thought the lesson I learned could be used by someone else!! Rich -- "You can lead them to LINUX but you can't make them THINK" Man. 2010.1 Spring KDE4.4 2.6.33.5-desktop-2mnb |
#2
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
Rich wrote:
And figured out what I did wrong. I'm building a Custom Printer Cabinet for a customer. She wanted it painted white to match the decor of her office. When it came time to paint I made the mistake of painting the inside of the cabinets first then within 5 to 10 minutes went back and painted the face frame. It seemed like the way to go. But when it dried I noticed the face frames was nice and smooth and looked great the inside of the cabinet were rough. I figured out what I did wrong. The Paint on the inside of cabinet had started to dry when I started spraying the face frame and the over spray was hitting the already sprayed inside causing a dry coating. I sanded the cabinet today and resprayed. Started on the inside and worked to the outside hitting the face frame then moving to the next opening and working my way out to the face frame. All looks great now Just thought the lesson I learned could be used by someone else!! Thank you. That's exactly what I was thinking while I was reading your post! : ) Bill Rich |
#3
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
On 4/7/2011 8:22 PM, Rich wrote:
And figured out what I did wrong. I'm building a Custom Printer Cabinet for a customer. She wanted it painted white to match the decor of her office. When it came time to paint I made the mistake of painting the inside of the cabinets first then within 5 to 10 minutes went back and painted the face frame. It seemed like the way to go. But when it dried I noticed the face frames was nice and smooth and looked great the inside of the cabinet were rough. I figured out what I did wrong. The Paint on the inside of cabinet had started to dry when I started spraying the face frame and the over spray was hitting the already sprayed inside causing a dry coating. I sanded the cabinet today and resprayed. Started on the inside and worked to the outside hitting the face frame then moving to the next opening and working my way out to the face frame. All looks great now Just thought the lesson I learned could be used by someone else!! Rich I hope you meant to write "SAW the errors" just to keep things on topic in this ng... Rich |
#4
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
A guy was working for my older brother, refinishing the wood floors.
He spent all day, meticulously sanding, then staining and sealing the floor. Just as he did the last strokes of the final coat of sealer, the heat came on, blowing out all the dust that had accumulated in the vent during the day. |
#5
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
lektric dan wrote:
A guy was working for my older brother, refinishing the wood floors. He spent all day, meticulously sanding, then staining and sealing the floor. Just as he did the last strokes of the final coat of sealer, the heat came on, blowing out all the dust that had accumulated in the vent during the day. That SUCKS!!!! Talk about a bad day.... -- "You can lead them to LINUX but you can't make them THINK" Man. 2010.1 Spring KDE4.4 2.6.33.5-desktop-2mnb |
#6
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
On Sun, 10 Apr 2011 06:23:35 -0700, Rich wrote:
lektric dan wrote: A guy was working for my older brother, refinishing the wood floors. He spent all day, meticulously sanding, then staining and sealing the floor. Just as he did the last strokes of the final coat of sealer, the heat came on, blowing out all the dust that had accumulated in the vent during the day. That SUCKS!!!! Talk about a bad day.... I don't get it. HVAC systems have filters and vents are in the ceiling in rational homes. Oh, it has floor registers? Why the hell didn't the guy tape them up? Whadda maroon! -- If you're looking for the key to the Universe, I've got some good news and some bad news. The bad news: There is no key to the Universe. The good news: It was never locked. --Swami Beyondananda |
#7
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
On 4/10/11 11:14 AM, Larry Jaques wrote:
On Sun, 10 Apr 2011 06:23:35 -0700, wrote: lektric dan wrote: A guy was working for my older brother, refinishing the wood floors. He spent all day, meticulously sanding, then staining and sealing the floor. Just as he did the last strokes of the final coat of sealer, the heat came on, blowing out all the dust that had accumulated in the vent during the day. That SUCKS!!!! Talk about a bad day.... I don't get it. HVAC systems have filters and vents are in the ceiling in rational homes. Oh, it has floor registers? Why the hell didn't the guy tape them up? Whadda maroon! Just shove some rags or newspaper in at least, or I don't know, turn OFF the furnace, at least before the final vacuum/tack cloth and applying the finish. -- Froz... The system will be down for 10 days for preventive maintenance. |
#8
Posted to rec.woodworking
|
|||
|
|||
Seen the Errors
On Apr 10, 11:19*am, FrozenNorth
wrote: On 4/10/11 11:14 AM, Larry Jaques wrote: On Sun, 10 Apr 2011 06:23:35 -0700, *wrote: lektric dan wrote: A guy was working for my older brother, refinishing the wood floors. He spent all day, meticulously sanding, then staining and sealing the floor. *Just as he did the last strokes of the final coat of sealer, the heat came on, blowing out all the dust that had accumulated in the vent during the day. That SUCKS!!!! *Talk about a bad day.... I don't get it. *HVAC systems have filters and vents are in the ceiling in rational homes. *Oh, it has floor registers? Why the hell didn't the guy tape them up? *Whadda maroon! Just shove some rags or newspaper in at least, or I don't know, turn OFF the furnace, at least before the final vacuum/tack cloth and applying the finish. -- Froz... The system will be down for 10 days for preventive maintenance. We did just that. Covered the vents, plastic ZipWall, isolated the kitchen completely. Then we went to town on doing some alterations to a solid surface countertop. Changing the sink meant we had to cut off the old one which created one helluva snowstorm, re-seam, sand and buff, but we were prepared. We even had a box fan in the kitchen window, making sure the kitchen stayed negative. Worked like a charm. Then, while packing up the truck, the lady of the house came from behind the house and motioned us to 'come-look-see'. In her back yard, a beautiful, large black and deep-blue tiled swimming-pool was covered in a fine white dust. Same stuff floating on the water and the bushes and plants were coated as well. It helped that the sprinklers had come on and made a bit of white mud as well. The upside was that the lady laughed...a lot.... after a while at least. We did get a couple of referrals off her. The downside, we didn't make any money off that job. The professional clean-up was quite costly. That happened only once. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Chroma errors in JVC S-VHS VCR | Electronics Repair | |||
GPIB data errors | Electronics Repair | |||
a lot of errors on Internet | Electronics Repair | |||
Region 1 DVD Disk Errors | UK diy |