Menu

Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

MDF finishing advice

Search this Thread

#1

Report Post

Posted to rec.woodworking

J. Clarke[_2_] J. Clarke[_2_] is offline

J. Clarke[_2_] is offline

external usenet poster

Posts: 1,366

Default

MDF finishing advice

In article ,
says...

I have tried many things to plug up the raw surface of routed or
worked MDF panels. The material is easy to work other than the
dust. It is the finishing that drives me nuts,

I have used:
drywall compound
acrylic wood filler
shellac
water based urethane
oil based urethane
latex paint
multiple coats of primer
55 coats of spray paint

I have yet to find a material or method that I consider fool
proof, easy, quick - I can't even say to pick any two.

Advice on method, material, and application would be appreciated.

The accepted method is to use what's called a "glue size" or "glue
sizing", you can buy it pre-mixed from the Titebond folks or just dilute
any white or yellow glue 10:1 or so. You will probably have to sand
after.

M.L. Campbell "Magnaclaw" primer is intended specifically for use on
MDF--one good wet coat gives a good seal. Note that it's a precatalyzed
lacquer base and take appropriate precautions (i.e. remember that it
will burn merrily and has toxic solvents).

I haven't tried it but gray automotive primer should work.

Reply With Quote

Reply With Quote

Thread Tools	Search this Thread
Show Printable Version	Search this Thread: Advanced Search
Display Modes
Linear Mode Switch to Hybrid Mode Switch to Threaded Mode

Posting Rules
Smilies are On [IMG] code is On HTML code is Off Trackbacks are On Pingbacks are On Refbacks are On

Similar Threads
Thread	Thread Starter	Forum	Replies	Last Post
MDF finishing advice	RicodJour	Woodworking	1	November 4th 10 04:50 AM
Need wood finishing advice!	Joey[_3_]	Woodworking	8	March 26th 08 10:07 PM
Newbie advice on finishing	[email protected]	Woodworking	2	August 20th 06 06:31 PM
Oak Finishing: Need Advice	Brian Siano	Woodworking	9	August 1st 05 08:36 PM
Help and/or advice on finishing	Ace	Woodworking	8	May 21st 05 09:20 PM

All times are GMT +1. The time now is 12:20 PM.

About Us

"It's about DIY & home improvement"

Contact Us DIY Banter Forum Home Privacy Statement