Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 4,207
Default "Cheap" paint

Did a price comparison on paint this week for some cabinets in the garage.

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 10, 9:52*am, "J. Clarke" wrote:
Did a price comparison on paint this week for some cabinets in the garage..

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.


Add a few bucks and go for Aura by Benjamin Moore. Goes further,
doesn't need primer, two coats and Bob's your uncle. An absolute treat
to work with. Maybe a bit of overkill for garage cabs.

The extra coverage almost makes up for the price葉oo close to matter.
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/10/10 9:59 AM, Robatoy wrote:
On Sep 10, 9:52 am, "J. wrote:
Did a price comparison on paint this week for some cabinets in the garage.

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.


Add a few bucks and go for Aura by Benjamin Moore. Goes further,
doesn't need primer, two coats and Bob's your uncle. An absolute treat
to work with. Maybe a bit of overkill for garage cabs.

The extra coverage almost makes up for the price葉oo close to matter.


Last time I bought "good" paint from Sherwin Williams, the store manager
suggested Penetrol Paint Conditioner. The stuff is amazing... I'll never
paint (w/good or bad paint) without it again.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default "Cheap" paint

Garage cabinets!? Does the color have to match a particular garage
decor?

Mis-mixed paint from any vender or paint from Big Lots, $5 a gallon.
The red barn stain/paint from Big Lots, available at random times, was
put on a friend's 20' X 30' shed (exterior, cypress - 1" thick solid
boards) 13 yrs ago and still looks good today.

Sonny
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 4,207
Default "Cheap" paint

On 9/10/2010 1:35 PM, Sonny wrote:
Garage cabinets!? Does the color have to match a particular garage
decor?


Has to be a specific color. Also non-blocking and non-chalking.

Mis-mixed paint from any vender or paint from Big Lots, $5 a gallon.
The red barn stain/paint from Big Lots, available at random times, was
put on a friend's 20' X 30' shed (exterior, cypress - 1" thick solid
boards) 13 yrs ago and still looks good today.


Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?



  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,861
Default "Cheap" paint


"Robatoy" wrote in message
...
On Sep 10, 9:52 am, "J. Clarke" wrote:
Did a price comparison on paint this week for some cabinets in the garage.

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.


Add a few bucks and go for Aura by Benjamin Moore. Goes further,
doesn't need primer, two coats and Bob's your uncle. An absolute treat
to work with. Maybe a bit of overkill for garage cabs.

The extra coverage almost makes up for the price葉oo close to matter.


About 10 years ago I painted a kitchen and pantry including inside the
cabinets. One coat, One gallon, Pratt and Lambert, $40 per gallon. I
try not to scrimp when I buy the paint. The good stuff is easier to work
with and covers better for a longer period of time.

I have painted many complete homes interiors since when the customer
provides the paint. Booooooo....


  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 4,207
Default "Cheap" paint

On 9/10/2010 7:31 PM, Leon wrote:
wrote in message
...
On Sep 10, 9:52 am, "J. wrote:
Did a price comparison on paint this week for some cabinets in the garage.

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.


Add a few bucks and go for Aura by Benjamin Moore. Goes further,
doesn't need primer, two coats and Bob's your uncle. An absolute treat
to work with. Maybe a bit of overkill for garage cabs.

The extra coverage almost makes up for the price葉oo close to matter.


About 10 years ago I painted a kitchen and pantry including inside the
cabinets. One coat, One gallon, Pratt and Lambert, $40 per gallon. I
try not to scrimp when I buy the paint. The good stuff is easier to work
with and covers better for a longer period of time.

I have painted many complete homes interiors since when the customer
provides the paint. Booooooo....


Why go with latex when you can have precat for less?
  #8   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,804
Default "Cheap" paint

On Sep 10, 1:10*pm, "J. Clarke" wrote:

Is the red barn paint non-blocking and non-chalking? *And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.

Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior: http://www.flickr.com/photos/43836144@N04/4978397594/

Sonny
  #9   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,581
Default "Cheap" paint

On Fri, 10 Sep 2010 12:19:44 -0500, -MIKE-
wrote:

On 9/10/10 9:59 AM, Robatoy wrote:
On Sep 10, 9:52 am, "J. wrote:
Did a price comparison on paint this week for some cabinets in the garage.

MagnaMax from the local real paint store 30 bucks a gallon.

Crap from Home Despot or Sears, 30 bucks a gallon.

Well, that decision was easy.


Add a few bucks and go for Aura by Benjamin Moore. Goes further,
doesn't need primer, two coats and Bob's your uncle. An absolute treat
to work with. Maybe a bit of overkill for garage cabs.

The extra coverage almost makes up for the price葉oo close to matter.


Last time I bought "good" paint from Sherwin Williams, the store manager
suggested Penetrol Paint Conditioner. The stuff is amazing... I'll never
paint (w/good or bad paint) without it again.


You like your paint to flow, do you? Yeah, good stuff.

--
Happiness comes of the capacity to feel deeply, to enjoy
simply, to think freely, to risk life, to be needed.
-- Storm Jameson
  #10   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 4,207
Default "Cheap" paint

On 9/10/2010 9:01 PM, Sonny wrote:
On Sep 10, 1:10 pm, "J. wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.

Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior: http://www.flickr.com/photos/43836144@N04/4978397594/


Not the look I have in mind at all.


  #11   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/10/10 8:07 PM, Larry Jaques wrote:
On Fri, 10 Sep 2010 12:19:44 -0500,

Last time I bought "good" paint from Sherwin Williams, the store manager
suggested Penetrol Paint Conditioner. The stuff is amazing... I'll never
paint (w/good or bad paint) without it again.


You like your paint to flow, do you? Yeah, good stuff.


This was an important project, so I took all the advice I was given.
http://www.mikedrums.com/bookcases.jpg

I don't do a lot of painting, and i don't like it, but that stuff made
me want to paint more. :-)



--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

  #12   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,024
Default "Cheap" paint

J. Clarke wrote:
On 9/10/2010 9:01 PM, Sonny wrote:
On Sep 10, 1:10 pm, "J. wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.

Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior:
http://www.flickr.com/photos/43836144@N04/4978397594/


Not the look I have in mind at all.


You don't like ferns???
  #13   Report Post  
Posted to rec.woodworking
Max Max is offline
external usenet poster
 
Posts: 767
Default "Cheap" paint

"Sonny" wrote in message
...
On Sep 10, 1:10 pm, "J. Clarke" wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.


Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior:
http://www.flickr.com/photos/43836144@N04/4978397594/


Sonny


And the original color was *white*? [:-)

Consumer Reports gives a high rating to Behr paints (Home Depot)

Max


  #14   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,581
Default "Cheap" paint

On Fri, 10 Sep 2010 22:06:41 -0500, -MIKE-
wrote:

On 9/10/10 8:07 PM, Larry Jaques wrote:
On Fri, 10 Sep 2010 12:19:44 -0500,

Last time I bought "good" paint from Sherwin Williams, the store manager
suggested Penetrol Paint Conditioner. The stuff is amazing... I'll never
paint (w/good or bad paint) without it again.


You like your paint to flow, do you? Yeah, good stuff.


This was an important project, so I took all the advice I was given.
http://www.mikedrums.com/bookcases.jpg

I don't do a lot of painting, and i don't like it, but that stuff made
me want to paint more. :-)


Nice. What kind of roller did you use. gd&r

I used Floetrol (oops, it was this, not oil-based Penetrol I was
thinking of) for repainting my louvered closet doors with a HF HVLP
spray gun. I had to thin with water, Floetrol, and warm it to about
100F to get it to spray. Glidden acrylic enamel ain't made for
sprayin'. sigh I'll use more when I brush the trim in the house
before my family shows up for Christmas. It's the Good Stuff for
waterborne paints.

--
Happiness comes of the capacity to feel deeply, to enjoy
simply, to think freely, to risk life, to be needed.
-- Storm Jameson
  #15   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/10/10 10:29 PM, Larry Jaques wrote:
This was an important project, so I took all the advice I was given.
http://www.mikedrums.com/bookcases.jpg

I don't do a lot of painting, and i don't like it, but that stuff made
me want to paint more. :-)


Nice. What kind of roller did you use.gd&r

.................................................. .................^?^?^?

I actually used a combination of stuff.
Spray... never could get a consistent flow, due to cheap gear and
inexperience.
Brush... Penetrol paid off in spades in this department.
And gasp roller for the shelves. It was the best way for them.


I used Floetrol (oops, it was this, not oil-based Penetrol I was
thinking of) for repainting my louvered closet doors with a HF HVLP
spray gun. I had to thin with water, Floetrol, and warm it to about
100F to get it to spray. Glidden acrylic enamel ain't made for
sprayin'.sigh I'll use more when I brush the trim in the house
before my family shows up for Christmas. It's the Good Stuff for
waterborne paints.

--
Happiness comes of the capacity to feel deeply, to enjoy
simply, to think freely, to risk life, to be needed.
-- Storm Jameson



--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply



  #16   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 4,207
Default "Cheap" paint

On 9/10/2010 11:22 PM, Max wrote:
"Sonny" wrote in message
...
On Sep 10, 1:10 pm, "J. Clarke" wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.


Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior:
http://www.flickr.com/photos/43836144@N04/4978397594/


Sonny


And the original color was *white*? [:-)

Consumer Reports gives a high rating to Behr paints (Home Depot)


How do they rate Imron?
  #17   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 583
Default "Cheap" paint


Last time I bought "good" paint from Sherwin Williams, the store manager
suggested Penetrol Paint Conditioner. The stuff is amazing... I'll
never
paint (w/good or bad paint) without it again.


You like your paint to flow, do you? Yeah, good stuff.


This was an important project, so I took all the advice I was given.
http://www.mikedrums.com/bookcases.jpg

I don't do a lot of painting, and i don't like it, but that stuff made me
want to paint more. :-)


I made the mistake of my life, with paint, but just once.

My wife wanted some large built in china cabinets made, so we talked about
what we wanted, and settled on red oak, lightly stained and clear coated. I
bought a good sized jag of oak, but then had some back issues and it sat for
a couple years until I started on them.

In the meantime, she decided that stained oak was dated, so she wanted them
to be painted. I told her that people don't paint oak; that was near to a
high crime. Never mind that, paint it would be.

I knew it was going to be tough to paint the oak, but that was my task, and
I would be up to the challenge.

I put on three cats of sanding sealer, with all of the required sanding,
then sprayed on some oil paint. Crrrraaap. That will never do; too much
grain pores showing through. Back to sanding, then with 4 or 5 coats of
sanding sealer, with the required sanding, then with a couple coats of
paint.

Still not even close. Now, I hit it with grain filler, sanding, then many
coats of sanding sealer, until it was slick as a baby's butt. More paint,
touch up with more filler here and there and sanding sealer, then more
paint.

I have to admit, they look glassy smooth, like a hand rubbed lacquer job,
but I sure had to work for it.

Never again. If you want smooth paint, no oak. I would have thrown the oak
in the dumpster, or burnt it in the fireplace, rather than building painted
cabinets out of it.

Live and learn. They say you learn most from your mistakes. If that is
true, I figure I must be a genius, by now!
--
Jim in NC


  #18   Report Post  
Posted to rec.woodworking
Max Max is offline
external usenet poster
 
Posts: 767
Default "Cheap" paint

"J. Clarke" wrote in message
...
On 9/10/2010 11:22 PM, Max wrote:
"Sonny" wrote in message
...
On Sep 10, 1:10 pm, "J. Clarke" wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.


Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior:
http://www.flickr.com/photos/43836144@N04/4978397594/


Sonny


And the original color was *white*? [:-)

Consumer Reports gives a high rating to Behr paints (Home Depot)


How do they rate Imron?



LOL. I don't think they're into rating industrial paints.

Max

  #19   Report Post  
Posted to rec.woodworking
Max Max is offline
external usenet poster
 
Posts: 767
Default "Cheap" paint

"-MIKE-" wrote

This was an important project, so I took all the advice I was given.
http://www.mikedrums.com/bookcases.jpg

I don't do a lot of painting, and i don't like it, but that stuff made
me want to paint more. :-)


I actually used a combination of stuff.
Spray... never could get a consistent flow, due to cheap gear and
inexperience.
Brush... Penetrol paid off in spades in this department.
And gasp roller for the shelves. It was the best way for them.



-MIKE-


Those bookcases weren't sprayed?? Wow! Outstanding!

I want the recipe. :-)

Max


  #20   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 11, 9:29*am, "Morgans" wrote:


Never again. *If you want smooth paint, no oak. *


Poplar rules!


  #21   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 583
Default "Cheap" paint

Never again. If you want smooth paint, no oak.

Poplar rules!

Amen, brother!

I am now building a whole set for my kitchen to match the china cabinets,
out of......

Poplar!
--
Jim in NC


  #22   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 379
Default "Cheap" paint

In article ,
Morgans wrote:

I made the mistake of my life, with paint, but just once.

My wife wanted .....

Live and learn. They say you learn most from your mistakes. If that is
true, I figure I must be a genius, by now!


Situations like that are pretty much unavoidable. Even when you _know_
it's 'wrong', it is, many times. =necessary= for 'domestic tranquility'
to go ahead and make a 'missus-stake', anyway. wry grin


  #23   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 379
Default "Cheap" paint

In article ,
J. Clarke wrote:
On 9/10/2010 11:22 PM, Max wrote:
"Sonny" wrote in message
...
On Sep 10, 1:10 pm, "J. Clarke" wrote:

Is the red barn paint non-blocking and non-chalking? And how does it
look on MDF?


I don't know the answer to either question. I've never read the Big
Lots cans, either, to know what kind of blend it is. Last summer my
friend considered recoating with the Big Lots barn paint, so I assume
it is, at least, decent for her shed's exterior.


Here's a view of her shed, pic taken about 3 or 4 yrs ago.... it had
been painted about 8 yrs prior:
http://www.flickr.com/photos/43836144@N04/4978397594/


Sonny


And the original color was *white*? [:-)

Consumer Reports gives a high rating to Behr paints (Home Depot)


How do they rate Imron?


"Not Suitable" for inclusion in family publication, because it is
X-rated. as in "X-pensive!!"


  #24   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,581
Default "Cheap" paint

On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"
wrote:

Never again. If you want smooth paint, no oak.


Poplar rules!

Amen, brother!

I am now building a whole set for my kitchen to match the china cabinets,
out of......

Poplar!


Do you sand it, shellac it, and sand the fuzzies off before painting?
The stuff has fur, I swear.

--
Happiness comes of the capacity to feel deeply, to enjoy
simply, to think freely, to risk life, to be needed.
-- Storm Jameson
  #25   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 18,538
Default "Cheap" paint

On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"
wrote:

Never again. If you want smooth paint, no oak.


Poplar rules!

Amen, brother!

I am now building a whole set for my kitchen to match the china cabinets,
out of......

Poplar!

AKA American Whitewood


  #27   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 11, 8:42*pm, "Lew Hodgett" wrote:
wrote:

Poplar!

AKA American Whitewood


OK, what's that green stuff in Poplar?

Lew


Patina
  #28   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 11, 8:31*pm, wrote:
On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"

wrote:
Never again. If you want smooth paint, no oak.


Poplar rules!


Amen, brother!


I am now building a whole set for my kitchen to match the china cabinets,
out of......


Poplar!


AKA American Whitewood


Tulipwood
  #29   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/11/10 8:04 PM, Robatoy wrote:
On Sep 11, 8:31 pm, wrote:
On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"

wrote:
Never again. If you want smooth paint, no oak.


Poplar rules!


Amen, brother!


I am now building a whole set for my kitchen to match the china cabinets,
out of......


Poplar!


AKA American Whitewood


Tulipwood


When I started seeing advertisements for Yellawood, I thought they were
talking about Poplar. :-)


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

  #30   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 379
Default "Cheap" paint

In article ,
Lew Hodgett wrote:

wrote:

Poplar!

AKA American Whitewood


OK, what's that green stuff in Poplar?


An experiment gone wrong. Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' Seems like the coloration
'took', but the patterns were distored beyond recognition.




  #31   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 18,538
Default "Cheap" paint

On Sat, 11 Sep 2010 17:51:00 -0700, jo4hn
wrote:

wrote:
On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"
wrote:

Never again. If you want smooth paint, no oak.
Poplar rules!

Amen, brother!

I am now building a whole set for my kitchen to match the china cabinets,
out of......

Poplar!

AKA American Whitewood

Whitewood is usually SPF (spruce, pine, fir)

Not up here it's not. It is Aspen or poplar, generally - defitely one
of the softer hardwoods - fine dense grain and no knots
  #32   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 11, 9:53*pm, (Robert Bonomi) wrote:
In article ,

Lew Hodgett wrote:

wrote:


Poplar!
AKA American Whitewood


OK, what's that green stuff in Poplar?


An experiment gone wrong. *Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' *Seems like the coloration
'took', but the patterns were distored beyond recognition.


Actually, the green patine is formed by a poplar tree growing next to
other vegetation, like the kind that can climb walls. It makes a
poplar green with ivy.
  #33   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 18,538
Default "Cheap" paint

On Sat, 11 Sep 2010 17:51:00 -0700, jo4hn
wrote:

wrote:
On Sat, 11 Sep 2010 11:01:27 -0400, "Morgans"
wrote:

Never again. If you want smooth paint, no oak.
Poplar rules!

Amen, brother!

I am now building a whole set for my kitchen to match the china cabinets,
out of......

Poplar!

AKA American Whitewood

Whitewood is usually SPF (spruce, pine, fir)


Liriodendron tulipifera
Otherwise known as "tulip poplar" - AKA "Yellow Poplar", Hickory
Poplar, Saddletree, and "Canoe-wood".
It is also sometimes called American basswood, but is actually neither
Basswood, nor Poplar.

It is part of the Mognoliaceae family and is the tallest hardwood in
North America.
They are fast growing - growing 50 feet in 11 years, on average.
Trees vary in height, but can grow to 200 ft, averaging between 100
and 150 ft tall, with trunks of 8 to 10 ft in diameter. Average weight
is 31 lbs per cubic foot, with a gravity of 0.51.
  #34   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/11/10 10:48 PM, Robatoy wrote:
On Sep 11, 9:53 pm, (Robert Bonomi) wrote:
In ,

Lew wrote:

wrote:


Poplar!
AKA American Whitewood


OK, what's that green stuff in Poplar?


An experiment gone wrong. Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' Seems like the coloration
'took', but the patterns were distored beyond recognition.


Actually, the green patine is formed by a poplar tree growing next to
other vegetation, like the kind that can climb walls. It makes a
poplar green with ivy.


groooooooooan HORRIBLE!


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

  #35   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 6,062
Default "Cheap" paint

On Sep 12, 12:24*am, -MIKE- wrote:
On 9/11/10 10:48 PM, Robatoy wrote:





On Sep 11, 9:53 pm, (Robert Bonomi) wrote:
In ,


Lew *wrote:


*wrote:


Poplar!
AKA American Whitewood


OK, what's that green stuff in Poplar?


An experiment gone wrong. *Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' *Seems like the coloration
'took', but the patterns were distored beyond recognition.


Actually, the green patine is formed by a poplar tree growing next to
other vegetation, like the kind that can climb walls. It makes a
poplar green with ivy.


groooooooooan * HORRIBLE!

--

* -MIKE-

* "Playing is not something I do at night, it's my function in life"
* * *--Elvin Jones *(1927-2004)
* --
*http://mikedrums.com
*
* ---remove "DOT" ^^^^ to reply


*takes a bow*
Thank you, thank you. (blames Bonomi)


  #36   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 2,581
Default "Cheap" paint

On Sat, 11 Sep 2010 20:48:18 -0700 (PDT), Robatoy
wrote:

On Sep 11, 9:53*pm, (Robert Bonomi) wrote:
In article ,

Lew Hodgett wrote:

wrote:


Poplar!
AKA American Whitewood


OK, what's that green stuff in Poplar?


An experiment gone wrong. *Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' *Seems like the coloration
'took', but the patterns were distored beyond recognition.


Actually, the green patine is formed by a poplar tree growing next to
other vegetation, like the kind that can climb walls. It makes a
poplar green with ivy.


Envy ivy, or just English ivy?

--
Not merely an absence of noise, Real Silence begins
when a reasonable being withdraws from the noise in
order to find peace and order in his inner sanctuary.
-- Peter Minard
  #37   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 5,721
Default "Cheap" paint

On 9/12/10 10:42 AM, Larry Jaques wrote:
On Sat, 11 Sep 2010 20:16:39 -0500,
wrote:

http://www.greatsouthernwood.com/


yes, that's it.


--

-MIKE-

"Playing is not something I do at night, it's my function in life"
--Elvin Jones (1927-2004)
--
http://mikedrums.com

---remove "DOT" ^^^^ to reply

  #38   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,852
Default "Cheap" paint

Ok - serious here :-)

Green-gray color is heart wood of the "poplar" or Yellow poplar
and the scientific name helps us along - Liriodendran tulipifera
Trade name - Yellow Poplar
Family name Magnoliaceae

"Holy" Magnolia and "Tipping" Tulip tree, Batman.
Color in the blooms Flowing tree.
Tends to have colorant in the tree.

Martin

Martin H. Eastburn
@ home at Lions' Lair with our computer lionslair at consolidated dot net
"Our Republic and the Press will Rise or Fall Together": Joseph Pulitzer
TSRA: Endowed; NRA LOH & Patron Member, Golden Eagle, Patriot's Medal.
NRA Second Amendment Task Force Originator & Charter Founder
IHMSA and NRA Metallic Silhouette maker & member. http://lufkinced.com/

On 9/11/2010 11:24 PM, -MIKE- wrote:
On 9/11/10 10:48 PM, Robatoy wrote:
On Sep 11, 9:53 pm, (Robert Bonomi) wrote:
In ,

Lew wrote:

wrote:

Poplar!
AKA American Whitewood

OK, what's that green stuff in Poplar?

An experiment gone wrong. Somebody grafted some output from the Treasury's
Bureau of Printing on to a sapling, to attempt to disprove the "poplar
adage" that 'money doesn't grrow on trees.' Seems like the coloration
'took', but the patterns were distored beyond recognition.


Actually, the green patine is formed by a poplar tree growing next to
other vegetation, like the kind that can climb walls. It makes a
poplar green with ivy.


groooooooooan HORRIBLE!


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
I am looking for a local source for "Rockwool" / "Mineral Wool" /"Safe & Sound" / "AFB" jtpr Home Repair 3 June 10th 10 06:27 AM
Paint for "sealed" wood surface ..."micropore"? jal UK diy 6 July 26th 09 05:06 PM


All times are GMT +1. The time now is 04:53 AM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ゥ2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"