Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#8
Posted to rec.woodworking
|
|||
|
|||
Making a box joint jig
Morris wrote:
This drawing should be reasonably self-explanitory, but I'm already planning to turn it into a web page with a bit of text to provide a bit of explanation with each drawing. Not for me Morris. Not by a long shot. I like your stuff as a rule and value your contributions here and elsewhere. But I could not make heads nor tails (no pun intended) out of those "drawings." PS: The workbench is coming along. Had some scrap particle board with that plastic finish on one side (salvaged store display) for the first layer of the top. Then a Ping Pong table (old, aged 5' x 9' plywood) came along ($4 Habitat Re-Store) for the second layer - and, soon, another use for that Masonite "find" - a sacrificial top surface. Although, the current ping pong-green top with a white edge is interesting! Alas, I am still scouting ideas for a fence arrangement that will work for the Miter Saw and the RAS. Like to do something "elegantly functional" with, of course, scrap or salvaged / re-cycled something or another. Lemme know when you do do the web page you do do so well. |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (1/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Bottom Of Shelf - Middle Of Joint Line From Below.jpg (0/1) | Woodworking Plans and Photos | |||
T+G Joint From Wreck Discussion - Close Up Of Middle Of Joint Line - Middle Of Joint Line From Above.jpg (1/1) | Woodworking Plans and Photos | |||
Need help finding a "Rosette" joint (toothed, round joint) | Metalworking | |||
Scarf joint or butt joint your choice on crown molding? | Woodworking |