Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3
Default Help choosing wood finish for water slide

This is a water slide shown he

http://igor.chudov.com/projects/Water-Slide-2.0/

The wood part is made of 2x4s.

My objective is to paint it with some paint that would be:

1) Non-slippery for wet feet
2) Would last for 4 years
3) I would prefer a bright, opaque paint. (ie, not stain)

I would prefer something that is available at Home Depot.

i
  #2   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 342
Default Help choosing wood finish for water slide

Ignoramus24381 wrote:

This is a water slide shown he

http://igor.chudov.com/projects/Water-Slide-2.0/

The wood part is made of 2x4s.

My objective is to paint it with some paint that would be:

1) Non-slippery for wet feet
2) Would last for 4 years
3) I would prefer a bright, opaque paint. (ie, not stain)

I would prefer something that is available at Home Depot.

i


Epoxy paint with fine sand sprinkled on before drying for traction.
--
Alex -- Replace "nospam" with "mail" to reply by email. Checked infrequently.
  #3   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3,287
Default Help choosing wood finish for water slide

On Jun 29, 11:38*am, Ignoramus24381 ignoramus24...@NOSPAM.
24381.invalid wrote:

I would prefer something that is available at Home Depot.


I can't imagine what they would have at HD that would work. They
aren't a specialty store.

I would try your local Sherwin Williams commercial/industrial coatings
store. IF you get the right rep, they can find a product for just
about everything.

It seems like you would be moving into the pool/tank coatings area.
Those products would provide water proofing, UV protection (opaque)
for your wood and an exterior rating that would take into effect
constant exposure to water.

Robert
  #4   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 3
Default Help choosing wood finish for water slide

On 2009-06-29, alexy wrote:
Epoxy paint with fine sand sprinkled on before drying for traction.


It would also need a UV inhibitor, I would think.

i
  #5   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 224
Default Help choosing wood finish for water slide



"alexy" wrote in message
...
Ignoramus24381 wrote:

This is a water slide shown he

http://igor.chudov.com/projects/Water-Slide-2.0/

The wood part is made of 2x4s.

My objective is to paint it with some paint that would be:

1) Non-slippery for wet feet
2) Would last for 4 years
3) I would prefer a bright, opaque paint. (ie, not stain)

I would prefer something that is available at Home Depot.

i


Epoxy paint with fine sand sprinkled on before drying for traction.
--
Alex -- Replace "nospam" with "mail" to reply by email. Checked
infrequently.


That is (IMO) a bad choice. Instead of giving a non-slippery surface, you
end up with a surface that you slip on and then it removes skin (like
sandpaper!) If you can find it, look for a product called "Skid-No-More".
It should be available at boating stores or pool stores.

http://www.go2marine.com/product.do?no=54245F

You should be able to find it locally. I painted a basement bathroom floor
with it 15 years ago and it is still going strong. If the slide is
outdoors, I'd expect about 5 years before needing to recoat. It can be
tinted (with any latex tint) and even mixed with most latex paints. From
that picture, it looks like a quart would do several coats.

Ed




  #6   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 1,852
Default Help choosing wood finish for water slide

Veranda or one of the plastic woods. No splinters
and keeps the color. Home Depot
It has surface ridges for gripping the feet.

Martin

Ignoramus24381 wrote:
This is a water slide shown he

http://igor.chudov.com/projects/Water-Slide-2.0/

The wood part is made of 2x4s.

My objective is to paint it with some paint that would be:

1) Non-slippery for wet feet
2) Would last for 4 years
3) I would prefer a bright, opaque paint. (ie, not stain)

I would prefer something that is available at Home Depot.

i

  #7   Report Post  
Posted to rec.woodworking
external usenet poster
 
Posts: 24
Default Help choosing wood finish for water slide


"Ignoramus24381" wrote in message
...
This is a water slide shown he

http://igor.chudov.com/projects/Water-Slide-2.0/

The wood part is made of 2x4s.

My objective is to paint it with some paint that would be:

1) Non-slippery for wet feet
2) Would last for 4 years
3) I would prefer a bright, opaque paint. (ie, not stain)

I would prefer something that is available at Home Depot.

i


I bought a roll of glue down grip and go paper designed for such things as
this. I use it on the steps up my porch. Originally I was afraid to paint
it, but gave in and put a coat of porch paint on it. Still has lots of grip,
doesn't sand off my skin, and provides tremendous anti-slip.

As far as the paint goes, why not look into stains, I know they can brighten
them up allot. My neighbor did his kids play fort with stains and his is
bright yellow and red.

markndawoods


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Choosing a HOT WATER RECIRCULATOR for QUICK HOT WATER DELIVERY or for HOT WATER ON D'MAND is now a whole lot easier. [email protected] Home Repair 22 June 7th 06 01:09 AM
Choosing the right blades for Balsa wood. Hog Head Woodworking 7 September 16th 05 01:24 PM
THANKS Re Water Slide (kids party pictures) Greg Postma Metalworking 6 June 9th 05 01:24 AM
wood finish stained white by water jwiiiiiiiiiiiiii Woodworking 7 March 2nd 05 01:06 PM
Choosing Wood for a Project Build Russell H. Martin, Jr Woodworking 8 November 2nd 04 11:29 PM


All times are GMT +1. The time now is 03:20 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"