Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
A question for anyone who has made or has thot about making a rotary tool
shank, like for attaching cutoff wheels. What is an easy to find material for making a rotary tool shank? I was thinking maybe using some rivet. Whatever, the qualities of the metal rod have to be something like this. ....Drillable metal, not extremely hard. ....Straight. ....Diameter exactly 1/8" quickly flaring to 3/16" or whatever at some point (it can be cut). ....Cheap. To accuratly center the screw hole in the end of the shank, the unmade shank can be inserted into a drill or rotary tool and spun against a stationary drill bit. Thanks in advance. |
#2
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
"John Doe" writes: A question for anyone who has made or has thot about making a rotary tool shank, like for attaching cutoff wheels. snip Can you say Dremel? For them, it's standard hardware. HTH -- Lew S/A: Challenge, The Bullet Proof Boat, (Under Construction in the Southland) Visit: http://home.earthlink.net/~lewhodgett for Pictures |
#3
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
Yes, I have made them for specialty industrial applications but for what you
are doing, why bother? Go to a good model shop. Dremel makes them and so do a number of others. Many are better than Dremel and they are cheap. "John Doe" wrote in message . .. A question for anyone who has made or has thot about making a rotary tool shank, like for attaching cutoff wheels. What is an easy to find material for making a rotary tool shank? I was thinking maybe using some rivet. Whatever, the qualities of the metal rod have to be something like this. ...Drillable metal, not extremely hard. ...Straight. ...Diameter exactly 1/8" quickly flaring to 3/16" or whatever at some point (it can be cut). ...Cheap. To accuratly center the screw hole in the end of the shank, the unmade shank can be inserted into a drill or rotary tool and spun against a stationary drill bit. Thanks in advance. |
#4
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
"CW" wrote
Yes, Yes? I have made them for specialty industrial applications And? but for what you are doing, why bother? I enjoy making things. Go to a good model shop. Dremel makes them and so do a number of others. Many are better than Dremel and they are cheap. "John Doe" wrote in message . .. A question for anyone who has made or has thot about making a rotary tool shank, like for attaching cutoff wheels. What is an easy to find material for making a rotary tool shank? I was thinking maybe using some rivet. Whatever, the qualities of the metal rod have to be something like this. ...Drillable metal, not extremely hard. ...Straight. ...Diameter exactly 1/8" quickly flaring to 3/16" or whatever at some point (it can be cut). ...Cheap. To accuratly center the screw hole in the end of the shank, the unmade shank can be inserted into a drill or rotary tool and spun against a stationary drill bit. Thanks in advance. Path: newssvr16.news.prodigy.com!newscon07.news.prodigy. com!newsmst01.news.prodig y.com!prodigy.com!pd7cy2so!pd7cy1no!shaw.ca!border 1.nntp.ash.giganews.com!b order2.nntp.sjc.giganews.com!border1.nntp.sjc.giga news.com!nntp.giganews.co m!local1.nntp.sjc.giganews.com!nntp.comcast.com!ne ws.comcast.com.POSTED!not -for-mail NNTP-Posting-Date: Fri, 13 Feb 2004 01:21:32 -0600 From: "CW" Newsgroups: rec.woodworking References: Subject: A question for anyone who has made a rotary tool shank. Date: Thu, 12 Feb 2004 23:22:09 -0800 X-Priority: 3 X-MSMail-Priority: Normal X-Newsreader: Microsoft Outlook Express 6.00.2800.1158 X-MimeOLE: Produced By Microsoft MimeOLE V6.00.2800.1165 Message-ID: Lines: 26 NNTP-Posting-Host: 24.18.14.127 X-Trace: sv3- rGGzXuByPhZWnzK5ENDrFM031FKq4AjDSn9nDjxR20SPL4BeNk p39URhxXgt3bavm85LLilmhH0 iE23!1a9BDqopFbMGT8gUi/eaZF30YAd17O6Tpogd9uQyEFm1+qBjKQwB9wa7lEUT X-Complaints-To: X-DMCA-Complaints-To: X-Abuse-and-DMCA-Info: Please be sure to forward a copy of ALL headers X-Abuse-and-DMCA-Info: Otherwise we will be unable to process your complaint properly X-Postfilter: 1.1 Xref: newsmst01.news.prodigy.com rec.woodworking:1009780 |
#5
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
John Doe wrote:
"CW" wrote Yes, Yes? I have made them for specialty industrial applications And? but for what you are doing, why bother? I enjoy making things. I take you are talking about 1/8 in. shanks. I have made several adaptors for my router to take slitting saws and special cutters and a longer shank for the finger joint cutter etc. I used plain old 1018 either hot rolled or cold rolled steel. Didn't heat treat or anything special. ...lew... |
#6
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
John Doe wrote:
"CW" wrote Yes, Yes? I have made them for specialty industrial applications And? but for what you are doing, why bother? I enjoy making things. Enco (http://www.use-enco.com) sells drill rod that you can probably turn to what you've described. Personally, I'd just use one of the standard mandrels from any of the rotary tool manufacturers and spend the time making something out of wood :-) -- Morris Dovey West Des Moines, Iowa USA C links at http://www.iedu.com/c Read my lips: The apple doesn't fall far from the tree. |
#7
|
|||
|
|||
A question for anyone who has made a rotary tool shank.
Drill rod machines very badly. My preference has always been 304 stainless.
Tough but machines well. "Morris Dovey" wrote in message news John Doe wrote: "CW" wrote Yes, Yes? I have made them for specialty industrial applications And? but for what you are doing, why bother? I enjoy making things. Enco (http://www.use-enco.com) sells drill rod that you can probably turn to what you've described. Personally, I'd just use one of the standard mandrels from any of the rotary tool manufacturers and spend the time making something out of wood :-) -- Morris Dovey West Des Moines, Iowa USA C links at http://www.iedu.com/c Read my lips: The apple doesn't fall far from the tree. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Home made Bandsaw question???? | Metalworking | |||
VFD / Rotary phase converter question | Metalworking | |||
A question for anyone who has made a rotary tool shank. | Metalworking | |||
"homemade" tool steel | Metalworking |