Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
Can anyone suggest a respirator other than the expensive powered hoods
that will permit me to wear my tri-focals (yes, yes, I'm well down the road) without them riding so high that I'm looking through the wrong lens? Thanks very much. Tim |
#2
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
|
#3
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
"Stuart" wrote in message ... In article , Pat Barber wrote: You are stuck with a 3M half mask http://www.northernsafety.com/Search...enance-3M.html or one of these: http://www.woodcraft.com/family.aspx?familyid=2089 I suspect both would still be an issue with spectacles -- Stuart Winsor I don't know about bi and tri-focals, but I wear one of those when I work in dusty or allergenic environments (i.e. the attic) and they fit around my glasses just fine. Of course I need a pair of windshield wipers to keep the lens from fogging up from sweat but I consider that a separate issue. On the other hand, I guess I don't consider these "respirators" more improved dust masks. A respirator would be something with a tank attached to it for working in hazardous gas environments. I only mention this because what the poster wanted wasn't totally clear to me. |
#4
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
"Eigenvector" wrote: Of course I need a pair of windshield wipers to keep the lens from fogging up from sweat but I consider that a separate issue. That's why "dew rags" exist. Check H/F, they'll have a bag of 25 for less than $5 on special sale. Lew |
#5
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
"Lew Hodgett" wrote in message news:kKGvk.467$jE1.259@trnddc03... "Eigenvector" wrote: Of course I need a pair of windshield wipers to keep the lens from fogging up from sweat but I consider that a separate issue. That's why "dew rags" exist. Check H/F, they'll have a bag of 25 for less than $5 on special sale. Lew Pshaw, that's why man developed the sweatband/headband. I just never have it on hand when I gird up for battle. I wear a headband at highpower matches, keeps my lenses clean for the critical moment. But I shot those 5 rings because the uhhh ...sun was in my eyes, yeah that was it. |
#6
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
Lew Hodgett wrote:
"Eigenvector" wrote: Of course I need a pair of windshield wipers to keep the lens from fogging up from sweat but I consider that a separate issue. That's why "dew rags" exist. Check H/F, they'll have a bag of 25 for less than $5 on special sale. Actually, do-rags exist to keep one's 'fro under control, if one can grow a 'fro. -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
#7
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
I have worn glasses most of my life and both
seem to work fine for me. A good fitting respirator takes some adjusting and you will know you have one on. I prefer the Dust Bee Gone for most woodworking applications. I use a respirator for spraying and brushing lacquer. Stuart wrote: In article , Pat Barber wrote: You are stuck with a 3M half mask http://www.northernsafety.com/Search...enance-3M.html or one of these: http://www.woodcraft.com/family.aspx?familyid=2089 I suspect both would still be an issue with spectacles |
#8
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
wrote in message ... Can anyone suggest a respirator other than the expensive powered hoods that will permit me to wear my tri-focals (yes, yes, I'm well down the road) without them riding so high that I'm looking through the wrong lens? Thanks very much. Tim If the respirator leaks then you have not fitted it correctly, or your face shape will not allow for a proper fit. If air leaks out around the seal, nasties can leak in through the same holes!! Go somewhere that will teach you how to do a face fit test and hey presto the steaming bi focals will not be a problem. 3M used to provide videos on doing face fit tests which should be done every time you put on a respirator. Powered air curtain/helmet type respirators are the way to go for most nuisance dusts. |
#9
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
Noone@home wrote:
If the respirator leaks then you have not fitted it correctly, or your face shape will not allow for a proper fit. If air leaks out around the seal, nasties can leak in through the same holes!! I believe the original poster wasn't complaining about leaks but rather the fact that wearing a respirator causes his glasses to ride high (presumably because the glasses end up sitting on the respirator rather than the nose itself). I run into this problem myself trying to wear safety glasses over a respirator. Chris |
#10
Posted to rec.woodworking
|
|||
|
|||
Respirators and glasses
Noone@home wrote:
wrote in message ... Can anyone suggest a respirator other than the expensive powered hoods that will permit me to wear my tri-focals (yes, yes, I'm well down the road) without them riding so high that I'm looking through the wrong lens? Thanks very much. Tim If the respirator leaks then you have not fitted it correctly, or your face shape will not allow for a proper fit. If air leaks out around the seal, nasties can leak in through the same holes!! He didn't say that it leaks, he said that his glasses ride so high on it that he's looking through the wrong part of the lens. Go somewhere that will teach you how to do a face fit test and hey presto the steaming bi focals will not be a problem. 3M used to provide videos on doing face fit tests which should be done every time you put on a respirator. He said he wore tri-focals, not bi-focals. If you're going to comment then at least read and try to understand the post to which you are responding. Powered air curtain/helmet type respirators are the way to go for most nuisance dusts. -- -- --John to email, dial "usenet" and validate (was jclarke at eye bee em dot net) |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Eye glasses | Home Repair | |||
Full face respirators (PAPR) recommendations | Woodworking | |||
Does your hot girlfriend need glasses? | Home Repair | |||
safety glasses | Home Repair | |||
Powered Respirators | Woodturning |