Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
Reply |
|
LinkBack | Thread Tools | Display Modes |
|
#1
Posted to rec.woodworking
|
|||
|
|||
Dyes and glue-up
I've been experimenting with dyes recently, something I've never tried
before. I'm about to get started on a first project with dyed wood and I wonder about glue-up. Can I dye a piece of wood and then glue it normally afterwards (i.e., yellow glue, pretty much like any wood)? The dye, from what I've seen and what I've read, soaks into the wood rather than coating the surface like a stain, and the surface of the dyed wood looks pretty normal except for the color. So I'm thinking I probably can treat it like normal wood for glueing purposes, but I haven't seen this mentioned one way or another anywhere. Advice from the group? Reply-to address is real John |
#2
Posted to rec.woodworking
|
|||
|
|||
Dyes and glue-up
On Sun, 27 Apr 2008 18:34:28 -0400, John
Can I dye a piece of wood and then glue it normally afterwards (i.e., yellow glue, pretty much like any wood)? In my experience, yes. The dye, from what I've seen and what I've read, soaks into the wood rather than coating the surface like a stain, and the surface of the dyed wood looks pretty normal except for the color. Right! Pigment stains, and pigment/dye combo stains, contain a binder, usually a varnish, that seals the wood. Glue doesn't stick well to varnish. Genuine dye stains don't contain a binder. --------------------------------------------- ** http://www.bburke.com/woodworking.html ** --------------------------------------------- |
#3
Posted to rec.woodworking
|
|||
|
|||
Dyes and glue-up
On Apr 27, 5:34*pm, John wrote:
I've been experimenting with dyes recently, something I've never tried before. *I'm about to get started on a first project with dyed wood and I wonder about glue-up. * Can I dye a piece of wood and then glue it normally afterwards (i.e., yellow glue, pretty much like any wood)? * The dye, from what I've seen and what I've read, soaks into the wood rather than coating the surface like a stain, and the surface of the dyed wood looks pretty normal except for the color. *So I'm thinking I probably can treat it like normal wood for glueing purposes, but I haven't seen this mentioned one way or another anywhere. Advice from the group? Reply-to address is real John Yes you should be able to glue no proble,. Be careful with glue squeeze out. It would be hard to sand and repair. Randy http://nokeswoodworks.com |
#4
Posted to rec.woodworking
|
|||
|
|||
Dyes and glue-up
On Sun, 27 Apr 2008 18:38:32 -0700 (PDT), randyswoodshoop
wrote: On Apr 27, 5:34*pm, John wrote: I've been experimenting with dyes recently, something I've never tried before. *I'm about to get started on a first project with dyed wood and I wonder about glue-up. * Can I dye a piece of wood and then glue it normally afterwards (i.e., yellow glue, pretty much like any wood)? * The dye, from what I've seen and what I've read, soaks into the wood rather than coating the surface like a stain, and the surface of the dyed wood looks pretty normal except for the color. *So I'm thinking I probably can treat it like normal wood for glueing purposes, but I haven't seen this mentioned one way or another anywhere. Advice from the group? Reply-to address is real John Yes you should be able to glue no proble,. Be careful with glue squeeze out. It would be hard to sand and repair. Randy http://nokeswoodworks.com Thanks, Barry and Randy, for confirming what I thought. (And that's a good point about the squeeze out. I'll have to watch it. Reply-to address is real John |
#5
Posted to rec.woodworking
|
|||
|
|||
Dyes and glue-up
On Apr 27, 9:38 pm, randyswoodshoop wrote:
On Apr 27, 5:34 pm, John wrote: I've been experimenting with dyes recently, something I've never tried before. I'm about to get started on a first project with dyed wood and I wonder about glue-up. Can I dye a piece of wood and then glue it normally afterwards (i.e., yellow glue, pretty much like any wood)? The dye, from what I've seen and what I've read, soaks into the wood rather than coating the surface like a stain, and the surface of the dyed wood looks pretty normal except for the color. So I'm thinking I probably can treat it like normal wood for glueing purposes, but I haven't seen this mentioned one way or another anywhere. Advice from the group? Reply-to address is real John Yes you should be able to glue no proble,. Be careful with glue squeeze out. It would be hard to sand and repair. Randyhttp://nokeswoodworks.com Mix some dye into your glue. |
Reply |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
Epoxy Resin Dyes | UK diy | |||
Wood dyes | UK diy | |||
Jeanette's can dyes in our barber after we like behind it. | Woodworking | |||
Wood dyes: Experimenting tomorrow | Woodworking | |||
Where to buy stains and dyes? | Woodworking |