Folks

Okay, I've been looking for a good new or used cabinet saw for some time. I
got one. I wanted something for "the right price", naturally... and was
ready to pop for a new one (probably the Jet deal with router) if need be,
but also would be plenty happy if I could find a GOOD used saw at a sensible
price.

I wanted a 3 hp, single phase left tilt cabinet saw, pref w/a Bies 50"
commercial fence and mobile base. I got ALMOST everything I wanted... so
here's my description of what I bought.... Tell me what you think its'
worth:

1 -General Table Saw - Model 350 3HP single phase - right tilt
Comes with extension legs, 3 assorted throat inserts, arbor wrenches and
manual,
Blade Guard and Splitter. Has a Leeson motor and new belts
12' power cord and both male and female plugs for wiring it into my shop and
FIRING IT UP!

Saw was mfd in 1995 (verified by serial number) and is a General, not
General Int'l
Saw has small scratches from drywall screws adjacent to miter slot - a
fingernail doesn't catch on them tho' - it's more visual...

2 - Biesemeyer Fence - 50"Commerical Fence - with a sawblade nick in the
left side of the fence, otherwise okay

3 - HTC Mobile Base w/extensions - New

4 - Accufence Miter Guage with 36" T- Slot Extrusion Fence thingy.

I fired up the saw and it ran fine... It does need to have a "tune up "
tho' I didn't detect that the fence or blade were out of square with the
top. The trunion gears need some lube, but other that that, it seems like a
good deal. The fellow said he had purchased the saw about 6 years ago, but
that it hadn't had much use in the last 4 or so as he had moved into a house
w/a single car garage. The prior owner was a carpenter and it was too much
saw for his needs.

So, there.... That's the background on the saw. Now you all tell me what
you think its worth and I'll be honest and post what I paid and other
details in a day or so after I've gotten it off the back of the truck.

OH boy, oh boy Oh BOYohboyoboyoboboboboboy oh-BOY!


John Moorhead
Lakeport CA

john moorhead wrote:

So, there.... That's the background on the saw. Now you all tell me what
you think its worth and I'll be honest and post what I paid and other
details in a day or so after I've gotten it off the back of the truck.

What a piece of crap. I'll give you $50 when you're ready to get rid of it.

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/

Nice stuff. If you paid anything over 5Kusd, you got took. You should
have lotsa fun with it. First off, make a pukey duck and post photo on
abpw. The best part about your post was the orgasm at the end. Phew.
mahalo,
jo4hn

"john moorhead" wrote in message news:ySdAb.242210$Dw6.840834@attbi_s02...
Folks

So, there.... That's the background on the saw. Now you all tell me what
you think its worth and I'll be honest and post what I paid and other
details in a day or so after I've gotten it off the back of the truck.

OH boy, oh boy Oh BOYohboyoboyoboboboboboy oh-BOY!


John Moorhead
Lakeport CA


better to send it to me to make sure it is a good machine I'll test
it send it in about ten years,,,,,so far it sounds like a deal you
can't passup,, will be watching for a followup,,,

I'd guess you paid $650.


"john moorhead" wrote in message
news:ySdAb.242210$Dw6.840834@attbi_s02...
Folks

Okay, I've been looking for a good new or used cabinet saw for some time.
I
got one. I wanted something for "the right price", naturally... and was
ready to pop for a new one (probably the Jet deal with router) if need be,
but also would be plenty happy if I could find a GOOD used saw at a
sensible
price.

I wanted a 3 hp, single phase left tilt cabinet saw, pref w/a Bies 50"
commercial fence and mobile base. I got ALMOST everything I wanted... so
here's my description of what I bought.... Tell me what you think its'
worth:

1 -General Table Saw - Model 350 3HP single phase - right tilt
Comes with extension legs, 3 assorted throat inserts, arbor wrenches and
manual,
Blade Guard and Splitter. Has a Leeson motor and new belts
12' power cord and both male and female plugs for wiring it into my shop
and
FIRING IT UP!

Saw was mfd in 1995 (verified by serial number) and is a General, not
General Int'l
Saw has small scratches from drywall screws adjacent to miter slot - a
fingernail doesn't catch on them tho' - it's more visual...

2 - Biesemeyer Fence - 50"Commerical Fence - with a sawblade nick in the
left side of the fence, otherwise okay

3 - HTC Mobile Base w/extensions - New

4 - Accufence Miter Guage with 36" T- Slot Extrusion Fence thingy.

I fired up the saw and it ran fine... It does need to have a "tune up "
tho' I didn't detect that the fence or blade were out of square with the
top. The trunion gears need some lube, but other that that, it seems like
a
good deal. The fellow said he had purchased the saw about 6 years ago,
but
that it hadn't had much use in the last 4 or so as he had moved into a
house
w/a single car garage. The prior owner was a carpenter and it was too
much
saw for his needs.

So, there.... That's the background on the saw. Now you all tell me what
you think its worth and I'll be honest and post what I paid and other
details in a day or so after I've gotten it off the back of the truck.

OH boy, oh boy Oh BOYohboyoboyoboboboboboy oh-BOY!


John Moorhead
Lakeport CA

Your Lucky!



"Mike in Mystic" wrote in message m...
I'd guess you paid $650.


"john moorhead" wrote in message
news:ySdAb.242210$Dw6.840834@attbi_s02...
Folks

Okay, I've been looking for a good new or used cabinet saw for some time.
I
got one. I wanted something for "the right price", naturally... and was
ready to pop for a new one (probably the Jet deal with router) if need be,
but also would be plenty happy if I could find a GOOD used saw at a
sensible
price.

I wanted a 3 hp, single phase left tilt cabinet saw, pref w/a Bies 50"
commercial fence and mobile base. I got ALMOST everything I wanted... so
here's my description of what I bought.... Tell me what you think its'
worth:

1 -General Table Saw - Model 350 3HP single phase - right tilt
Comes with extension legs, 3 assorted throat inserts, arbor wrenches and
manual,
Blade Guard and Splitter. Has a Leeson motor and new belts
12' power cord and both male and female plugs for wiring it into my shop
and
FIRING IT UP!

Saw was mfd in 1995 (verified by serial number) and is a General, not
General Int'l
Saw has small scratches from drywall screws adjacent to miter slot - a
fingernail doesn't catch on them tho' - it's more visual...

2 - Biesemeyer Fence - 50"Commerical Fence - with a sawblade nick in the
left side of the fence, otherwise okay

3 - HTC Mobile Base w/extensions - New

4 - Accufence Miter Guage with 36" T- Slot Extrusion Fence thingy.

I fired up the saw and it ran fine... It does need to have a "tune up "
tho' I didn't detect that the fence or blade were out of square with the
top. The trunion gears need some lube, but other that that, it seems like
a
good deal. The fellow said he had purchased the saw about 6 years ago,
but
that it hadn't had much use in the last 4 or so as he had moved into a
house
w/a single car garage. The prior owner was a carpenter and it was too
much
saw for his needs.

So, there.... That's the background on the saw. Now you all tell me what
you think its worth and I'll be honest and post what I paid and other
details in a day or so after I've gotten it off the back of the truck.

OH boy, oh boy Oh BOYohboyoboyoboboboboboy oh-BOY!


John Moorhead
Lakeport CA

Mike -

Okay, you're killing me... ehehhehheee....

John

I'm just trying to get you to come on and tell us already haha


"john moorhead" wrote in message
news:0%JAb.450321$HS4.3527651@attbi_s01...
Mike -

Okay, you're killing me... ehehhehheee....

John