Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
Old November 17th 03, 07:04 PM
Faustino Dina
 
Posts: n/a
Default understanding wood painting...

Hi,

I'm iterating on this topic, 'cause I cant understand to the end my choices
for painting wood. I want to apply a color over particleboard, i.e. I don't
want to preserve the original "wood" color. For my better understanding I
was looking the catalog of Sherwing Williams products, just for example. But
all the finishes for wood in the SW catalog are transparent, no matter they
were lacquers or polyurethane. So means it I'll need to use an oil-based
paint, THE SAME THAT IS USED FOR METAL, to be applyed after the sealer? Then
after that I'll need to use the transparent lacquer for a highly glossy
finish? I was asking in a shop that sells finishings for wood (the most
specialized one I've found on my area) and they answered me "we prepare what
you need", I saw the guys were "cooking" his paints by mixing and remixing
colors, but actually what they were cooking I don't get the answer. I've
seen on shops (Wallmart-alike) they sell paint even in can for spraying.
They say you can use it for everything, from furniture to cars. Can they be
used for wood? I'm thinking I will get better result spraying with these
cans than brushing by hand? Is it a real alternative to buy an expensive
compressor?

Then, can I assume that after sealing the wood, I can use any type of paint,
and after that, I can use transparent lacquer or polyurethane to get the
highest glossy finish? Is it right?

I'd prefer you guys not reccommend me any specific product, 'cause the most
probable I'll not find it on the local market. I'd preffer advices on
generic traditional types of paints.

Thanks in advance
--
Faustino Dina
--------------------------------------------------------
If my email address starts with two 'f'
drop the first 'f' when mailing me.



  #2   Report Post  
Old November 17th 03, 07:58 PM
Charles Krug
 
Posts: n/a
Default understanding wood painting...

On Mon, 17 Nov 2003 12:04:45 -0600, Faustino Dina wrote:
Hi,

I'm iterating on this topic, 'cause I cant understand to the end my choices
for painting wood. I want to apply a color over particleboard, i.e. I don't
want to preserve the original "wood" color. For my better understanding I


Not much to preserve with P-board. Clear finish is to show off the
expensive mesquite you used for your shelves.

Particle board, you paint. If it's going to be inside in a dry
location, any old latex will do. Your latex paint dealer may recommend
a specific primer for particle board.

If it's outside, you shouldn't have used p-board.

I've had good success in a damp basement using oil-based primer followed
by two coats of latex with an anti-mold additive.

Paint marked "Cucina y Bano" (Kitchen and bath to we Yanks) already has
an antimold additive.

Your paint dealer, in most cases, will mix your paint to order using
standardized pigments. No biggy. The price includes tinting unless
you're buying one of the 2-3 premixed colors, usually different versions
of white.

Up here, the Big Box stores have shelves marked "Oops" where you can buy
badly mixed paint for $5 a gallon. I can often find a reasonable color
choice there if it's for something over which SWMBO doesn't have veto
power



Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Painting Tanalised Wood. Zapp Brannigan Woodworking 3 October 10th 03 01:55 PM
Painting Varnished Wood Charles Middleton UK diy 3 September 27th 03 01:48 PM
Cutting worktop and painting wood in kitchen?? whats best?? fireblade UK diy 1 July 22nd 03 10:30 AM


All times are GMT +1. The time now is 07:38 AM.

Powered by vBulletin® Copyright ©2000 - 2021, Jelsoft Enterprises Ltd.
Copyright 2004-2021 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"

 

Copyright © 2017