Home |
Search |
Today's Posts |
|
Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte. |
|
LinkBack | Thread Tools | Display Modes |
#1
Posted to rec.woodworking
|
|||
|
|||
Air nailer kit question.
http://www.amazon.com/gp/product/B00...lance&n=228013
1. If I nail at an angle the finish nail sticks out about 1/4" from the surface but then when I use the hammer to drive it down the hail head just bend over. Are there finish nailers the could be used at an angle? 2. The compressor develop a leak a couple of weeks ago at the regulator. Took it apart but couldn't see anything wrong - have not replace the O-ring yet. I've had it over a year but don't use it that much - maybe two continuous hours. When it is in storage do I leave it at full pressure or discharge the compressor? |
Thread Tools | Search this Thread |
Display Modes | |
|
|
Similar Threads | ||||
Thread | Forum | |||
HF 15ga nailer? (or others, for that matter)? | Woodworking | |||
Simple question regarding Ceiling tiles and sound? | Home Repair |