Folks,

Anybody brave enough to buy this nailer recently?

http://www.harborfreight.com/cpi/cta...emnumber=47612

There's one post in the group from Jan '04 indicating ~60% jam rate. Not
good. (MattH is the poster).

It's currently on sale for $70, but if it's a POS, it's still a POS.

(Yeah, I know HF's general reputation. I also know that a lot of folks,
me included, have the little 18ga nailer and have had really good luck
with that one).

Any other recommendations for 15ga nailers that won't break the bank?

One last question -- HF's web page lists 10-12 cfm for this particular
nailer. Can that possibly be right? That seems really high for a nail
gun.

(My intended use is to nail up backing boards prior to installing crown
molding in the mudporch; I don't need something that's industrial
quality).

on 6/28/2005 1:07 PM John Thomas said the following:

One last question -- HF's web page lists 10-12 cfm for this particular
nailer. Can that possibly be right? That seems really high for a nail
gun.

It sure does. Reading through some of their product descriptions you
have to wonder what the hell they're thinking of.

I was tempted to say that the example above looks like somebody missed a
decimal point (and that might still be the case) but even their 10 gauge
nailers are all over the place. One lists consumption at 3.0 to 3.5 and
another upwards of 10 cfm. Consumption is not listed for many of their
tools.

FWIW I have the PC 15 gauge and it makes no difference whether I'm
running it of a larger stationary air compressor in the shop or off a
little oil-less BORG $100 special that I picked up to do some trim work
in the house rather than buying a couple hundred feet of hose.

Unquestionably Confused wrote in news:lGgwe.6993
:

FWIW I have the PC 15 gauge and it makes no difference whether I'm
running it of a larger stationary air compressor in the shop or off a
little oil-less BORG $100 special that I picked up to do some trim work
in the house rather than buying a couple hundred feet of hose.


I like the looks of the PC, and know it's well made, but the price is a bit
out of my range for my intended use. (I know, cry once and be done with it,
right?)

Regards,
JT

Why don't you just rent one for 20$ for a weekend?

Wally


On Tue, 28 Jun 2005 19:15:00 +0000 (UTC), John Thomas
wrote:

Unquestionably Confused wrote in news:lGgwe.6993
:

FWIW I have the PC 15 gauge and it makes no difference whether I'm
running it of a larger stationary air compressor in the shop or off a
little oil-less BORG $100 special that I picked up to do some trim work
in the house rather than buying a couple hundred feet of hose.


I like the looks of the PC, and know it's well made, but the price is a bit
out of my range for my intended use. (I know, cry once and be done with it,
right?)

Regards,
JT

Wally wrote in news:59o3c19mt2k3qul3t79i8qchi9pnlvve05@
4ax.com:

Why don't you just rent one for 20$ for a weekend?

Wally


I've actually thought of that, but that would mean I'd have to be ready
to use it.

It also violates the "new project, new tool" rule, but it is an option
to consider.

(I really did that when buying a tall extension ladder (2 story +
daylight basement home) -- wasn't sure what length I really needed, vs
how much ladder was "too tall" ...)

Regards,

JT

John Thomas wrote in
:

Folks,

Anybody brave enough to buy this nailer recently?


I bought the 16 ga straight nose PC nailer at HD for $159 last week,
because a POS is ALWAYS a POS, and a frustrating day or two lost to crappy
tools stays lost forever. Even when you are doing it for yourself.

More so when there is stock to stage, scaffold or ladders to move, and
tools to set up. Life's too short, and there are too many competing good
things to do.

If money's tight, then perhaps hand nailing is an option.

Patriarch

I second this opinion 100%

Hand nailing never killed anyone. A handful of nails cost a few
dollars and we all have a hammer.

It's not worth buying cheap stuff and I think it's criminal to buy off
shore junk in which one has not other interest than the rock bottom
price just too good to be true.

Just my opinion...

Wally



On Tue, 28 Jun 2005 19:43:12 -0500, Patriarch
wrote:

John Thomas wrote in
. 6:

Folks,

Anybody brave enough to buy this nailer recently?


I bought the 16 ga straight nose PC nailer at HD for $159 last week,
because a POS is ALWAYS a POS, and a frustrating day or two lost to crappy
tools stays lost forever. Even when you are doing it for yourself.

More so when there is stock to stage, scaffold or ladders to move, and
tools to set up. Life's too short, and there are too many competing good
things to do.

If money's tight, then perhaps hand nailing is an option.

Patriarch

On Tue, 28 Jun 2005 18:07:24 +0000 (UTC), John Thomas
wrote:

I've got 2 of their cheap 18 ga. brad guns... about $20 on sale...
both work well and keep on working, no jams that I can remember
Folks,

Anybody brave enough to buy this nailer recently?

http://www.harborfreight.com/cpi/cta...emnumber=47612

There's one post in the group from Jan '04 indicating ~60% jam rate. Not
good. (MattH is the poster).

It's currently on sale for $70, but if it's a POS, it's still a POS.

(Yeah, I know HF's general reputation. I also know that a lot of folks,
me included, have the little 18ga nailer and have had really good luck
with that one).

Any other recommendations for 15ga nailers that won't break the bank?

One last question -- HF's web page lists 10-12 cfm for this particular
nailer. Can that possibly be right? That seems really high for a nail
gun.

(My intended use is to nail up backing boards prior to installing crown
molding in the mudporch; I don't need something that's industrial
quality).



mac

Please remove splinters before emailing