I'm going to upgrade tablesaw miter gauge and it's kind of a toss up between
the Incra 1000SE or the
Osborne EB-3, any personal experience with either of these, pros cons?
Thanks

--

Mike S.

http://members.tripod.com/n0yii/woodworking.htm

Mike S. wrote:
I'm going to upgrade tablesaw miter gauge and it's kind of a toss up between
the Incra 1000SE or the
Osborne EB-3, any personal experience with either of these, pros cons?
Thanks


Have the Incra 1000SE Woodcraft edition. Love it. 1/10 degree
accuracy. Easy to set up, adjust and use.

I really like the easy fast fence adjustment, can slide it out next to
the blade in a couple seconds, or pull it back away from bevel/angle
cuts just as quickly and it doesn't affect the accuracy or angle
adjustments.

The alignment was perfect out of the box.

The fence has slots for adding you own attachements. I can see a box
joint jig in it's future.

The fence stop is a hoot. Even though it is a one piece unit, you can
get about 1/2" to 7" difference between the two arms. Very easy to
adjust. And with the slotted fence it is easy to add a homebrew stop,
instead of clamping a difficult to adjust scrap to the fence.

Drawbacks? They provide a really nice ball head allen driver for all
the adjustments, except angle, which is tool less. Need to keep track
of the driver. Oh, the fence stop is also tool less. But, I think the
Incra is not as rugged of miter as the Osborne. If you take care of it
I think it will last forever, but if you have ham handed buddies, or
kids, using it I think the Osborne might hold up better.

I had been planning on the Osborne, but the Incra was in stock. A
couple other folks in the store had the Incra and really sang it's praises.

Breifly looked at the Kreg, but didn't seem as user friendly as the
Incra or Osborne. Looked good for standard angles, but other angles
were as difficult to set as with the stock miter that came with my saw.
I tinker with segmented turnings and need the ability to cut some not
so standard angles.

--
Bill Berglin

"Life should not be a journey to the grave with the intention of
arriving safely in a pretty and well preserved body, but rather to skid
in broadside, thoroughly used up, totally worn out, and loudly
proclaiming, 'WOW! What A RIDE!!" ... Unknown

In article ,
"Mike S." wrote:

I'm going to upgrade tablesaw miter gauge and it's kind of a toss up between
the Incra 1000SE or the
Osborne EB-3, any personal experience with either of these, pros cons?

Have you looked at the new JessEm? Saw one a couple weeks ago and liked
it in comparison to the others - tho I have no experience with anything
other than the stock Delta gage.
--
Owen Lowe
The Fly-by-Night Copper Company
__________

"I pledge allegiance to the flag of the
Corporate States of America and to the
Republicans for which it stands, one nation,
under debt, easily divisible, with liberty
and justice for oil."
- Wiley Miller, Non Sequitur, 1/24/05

Hi Mike,
Leon did quite a review of a few types a while back. Probably worth a google in
this news group. Cheers, JG

"Mike S." wrote:

I'm going to upgrade tablesaw miter gauge and it's kind of a toss up between
the Incra 1000SE or the
Osborne EB-3, any personal experience with either of these, pros cons?
Thanks

--

Mike S.

http://members.tripod.com/n0yii/woodworking.htm