http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?

They are usually mounted using a wooden cleat ( square bar ) that attaches
to the wall , the shelf has a recess in the rear the bar fits into so it's
hidden. Screws are then run through the shelf either from top or bottom
depending on the design and into the wooden cleat, securing it to the wall.

Do a Google for floating shelves and you can see some examples of what I'm
talking about.


"Larry Bud" wrote in message
oups.com...
http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?

Larry Bud wrote:

http://ww1.westelm.com/cat/pip.cfm?s...8864&gids=p192
&cmsrc=rel

Anybody know how these are mounted on the wall?

Either with a cleat as booger said or with rods that are inserted into
the wall and matching holes in the shelves. Still another way is with a
couple of round head screws in the wall and slightly recessed plates
with screw head slots on the backs of the shelves.

--
dadiOH
____________________________

dadiOH's dandies v3.06...
....a help file of info about MP3s, recording from
LP/cassette and tips & tricks on this and that.
Get it at http://mysite.verizon.net/xico

Larry Bud wrote:
http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?

Maybe
http://www.leevalley.com/hardware/page.aspx?c=2&p=5193

wrote in message
oups.com...
Larry Bud wrote:
http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?

Maybe
http://www.leevalley.com/hardware/page.aspx?c=2&p=5193


Yep. I use looooong molly bolts with nylon standoffs. Cheaper by far, works
well.

I pitch the mounting holes ~2 degrees up.

On 18 Oct 2005 05:23:18 -0700, "Larry Bud"
wrote:

http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?


I don't know, but I wouldn't put any weight on them- they're made of
chocolate....

Sorry
" http://www.leevalley.com/hardware/pa...33&cat=53&ap=3 "

wrote:
Sorry
" http://www.leevalley.com/hardware/pa...33&cat=53&ap=3 "


My guess would be something more like this:

http://www.dlawlesshardware.com/hanplatheavd.html

--
Jack Novak
Buffalo, NY - USA

(Remove -SPAM- to send email)

no(SPAM)vasys wrote:
wrote:
Sorry
" http://www.leevalley.com/hardware/pa...33&cat=53&ap=3 "


My guess would be something more like this:

http://www.dlawlesshardware.com/hanplatheavd.html

Perfect!

Thanks everyone. Almost time to get back into WW now that the golfing
weather is nearly over!

Could be but not with 1.25" shelves shown in the OP link
Joe

My wife purchased (grumble inserted here) some floating shelves from Pottery
Barn. They used keyhole brackets.

Roger


"Larry Bud" wrote in message
oups.com...
http://ww1.westelm.com/cat/pip.cfm?s...92&cmsr c=rel

Anybody know how these are mounted on the wall?