Woodworking (rec.woodworking) Discussion forum covering all aspects of working with wood. All levels of expertise are encouraged to particiapte.

Reply
 
LinkBack Thread Tools Search this Thread Display Modes
  #1   Report Post  
pignacolata
 
Posts: n/a
Default Fence

Hi, I'm from Italy. Here we don't have the habit of doing fences with
woods so I'm asking to you how can I make my own fence ( buying woods
and so ) and make it lasts for ..let's say 10 years. You're alla
specialist aren't you ;-) ? I was reading that someone here in Italy buy
"bare" wood and treat it with "catramina", a product used with cars.
This avoid to spend a lot of money with the special green wood. What can
you say about that ?

Bye, pigna..
  #2   Report Post  
Never Enough Money
 
Posts: n/a
Default

First, let me say that I vivited Rome last year and am going to
northern Italy in Spetember. Italy is a beautiful country and the
people are very nice.

Now, to answer your question I've built two fences. Both used treated
cedar which is available at Lowes or Home Depot. I used the "shadow
box" style because we have high winds here in Colorado. Shadow box
style is also nice because it looks the same from both sides.

I used all scrwes - no nails.

I then stained it with Penafin.

It'll last longer than 10 years!

Cheers

  #3   Report Post  
pignacolata
 
Posts: n/a
Default

Never Enough Money ha scritto:
First, let me say that I vivited Rome last year and am going to
northern Italy in Spetember. Italy is a beautiful country and the
people are very nice.


Oh, thanks. Rome is fantastic. We know it. The people are the best part
of Italy. I'm in the North and here the weather is quite rainy and
foggy, so the question.


Now, to answer your question I've built two fences. Both used treated
cedar which is available at Lowes or Home Depot. I used the "shadow
box" style because we have high winds here in Colorado. Shadow box
style is also nice because it looks the same from both sides.


I used all scrwes - no nails.

Nice trick. No nails but inox screws ..

I then stained it with Penafin.

Penafin ? I don't know what it is nor where to find it.

It'll last longer than 10 years!

This is good! Without treat it again with this Penafin ?

Cheers

Ciao !

  #4   Report Post  
Never Enough Money
 
Posts: n/a
Default

Here's a ;ink to Penofin (I misspeled it before)....

http://www.penofin.com/
BTW, Thomas Kendrick has some good advice about water -- I used the
pressure treated "green" wood for the post. I pt them in concrete
although some folks here on Coloraod are now recommending putting them
in the hole and compressing small gravel around them (making them
easire to replace 5 ot 10 years later).

BTW, my boss is Italian and has offer to let me stay in his house in
Sarnao in the Marche province. Is it nice there? (I suspect all of
Italy is nice...)

Cheers

  #5   Report Post  
Edwin Pawlowski
 
Posts: n/a
Default


"Never Enough Money" wrote in message

BTW, my boss is Italian and has offer to let me stay in his house in
Sarnao in the Marche province. Is it nice there? (I suspect all of
Italy is nice...)


Yes, by all means, go. I don't know that particular town, but the region is
very nice.
http://www.travelplan.it/reg_mar_main_page.htm




  #6   Report Post  
Thomas Kendrick
 
Posts: n/a
Default

The way to make wood fences last for 10 years is to avoid having the
fence contact the ground and avoid water puddles on the boards.

We keep the fence off the ground by using metal fence posts OR posts
made of the special green wood (pressure treated). As well, when the
fence pickets are installed, the bottom of each picket is a few inches
off the ground.

We avoid water puddles by coating the fence with a preservative that
is applied by spraying, rolling or brushing; just like paint or stain.

Finally, the fasteners used to hold the fence together and connect to
the post are galvanized (zinc coated) to delay rusting.

On Fri, 24 Jun 2005 11:53:57 GMT, pignacolata
wrote:

Hi, I'm from Italy. Here we don't have the habit of doing fences with
woods so I'm asking to you how can I make my own fence ( buying woods
and so ) and make it lasts for ..let's say 10 years. You're alla
specialist aren't you ;-) ? I was reading that someone here in Italy buy
"bare" wood and treat it with "catramina", a product used with cars.
This avoid to spend a lot of money with the special green wood. What can
you say about that ?

Bye, pigna..


  #7   Report Post  
pignacolata
 
Posts: n/a
Default

Thomas Kendrick ha scritto:
The way to make wood fences last for 10 years is to avoid having the
fence contact the ground and avoid water puddles on the boards.

We keep the fence off the ground by using metal fence posts OR posts
made of the special green wood (pressure treated). As well, when the
fence pickets are installed, the bottom of each picket is a few inches
off the ground.

ok, this is very clear to me.

We avoid water puddles by coating the fence with a preservative that
is applied by spraying, rolling or brushing; just like paint or stain.

DO you know the name of this protective film ?

Finally, the fasteners used to hold the fence together and connect to
the post are galvanized (zinc coated) to delay rusting.

ok, another usefull trick.
On Fri, 24 Jun 2005 11:53:57 GMT, pignacolata
wrote:


Hi, I'm from Italy. Here we don't have the habit of doing fences with
woods so I'm asking to you how can I make my own fence ( buying woods
and so ) and make it lasts for ..let's say 10 years. You're alla
specialist aren't you ;-) ? I was reading that someone here in Italy buy
"bare" wood and treat it with "catramina", a product used with cars.
This avoid to spend a lot of money with the special green wood. What can
you say about that ?

Bye, pigna..



  #8   Report Post  
Lawrence Wasserman
 
Posts: n/a
Default

In article ,
pignacolata wrote:
Hi, I'm from Italy. Here we don't have the habit of doing fences with
woods so I'm asking to you how can I make my own fence ( buying woods
and so ) and make it lasts for ..let's say 10 years. You're alla
specialist aren't you ;-) ? I was reading that someone here in Italy buy
"bare" wood and treat it with "catramina", a product used with cars.
This avoid to spend a lot of money with the special green wood. What can
you say about that ?

Bye, pigna..


Not much, I think you said it all...


--

Larry Wasserman Baltimore, Maryland


Reply
Thread Tools Search this Thread
Search this Thread:

Advanced Search
Display Modes

Posting Rules

Smilies are On
[IMG] code is On
HTML code is Off
Trackbacks are On
Pingbacks are On
Refbacks are On


Similar Threads
Thread Thread Starter Forum Replies Last Post
Mild fence property line "dispute" Actor123 Home Ownership 12 February 15th 05 09:36 PM
Incra 1000 SE crosscut fence Rob Mitchell Woodworking 14 February 14th 05 06:43 AM
Excalibur sliding table help needed max Woodworking 8 February 3rd 05 04:09 PM
Ping - Leon (Trials and Tribulations of Finding an Accurate Fence) Bob Woodworking 2 June 28th 04 09:52 PM
Jet TS fence query john moorhead Woodworking 8 November 15th 03 03:49 PM


All times are GMT +1. The time now is 06:56 PM.

Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004-2024 DIYbanter.
The comments are property of their posters.
 

About Us

"It's about DIY & home improvement"