I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!

"RonB" wrote in message
news:8r6kd.99348$tU4.20754@okepread06...
I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!

I know a person (very well, in fact) who did the same trick with one of
those divided boxes filled with different sizes of woodscrews. This person
was very upset.
Billh

billh wrote:

I know a person (very well, in fact) who did the same trick with one of
those divided boxes filled with different sizes of woodscrews. This person
was very upset.

LOL! Pop rivets!

--
Michael McIntyre ---- Silvan
Linux fanatic, and certified Geek; registered Linux user #243621
http://www.geocities.com/Paris/Rue/5407/
http://rosegarden.sourceforge.net/tutorial/

On Tue, 9 Nov 2004 12:04:41 -0500, "billh"
wrote:


This person was very upset.

Not to mention the screws.


--
Chuck *#:^)
chaz3913(AT)yahoo(DOT)com
Anti-spam sig: please remove "NO SPAM" from e-mail address to reply.


September 11, 2001 - Never Forget


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---

My bowl lathe uses a wrench to hold the spindle while undoing the face
plate. Remove the wrench before turning on the lathe. Remove the wrench
before turning on the lathe. Remove the wrench before turning on the
lathe.....
I found it. It can fly but it can not hide (very long)
--
God bless and safe turning
Darrell Feltmate
Truro, NS Canada
www.aroundthewoods.com

Darrell Feltmate wrote:
My bowl lathe uses a wrench to hold the spindle while undoing the face
plate. Remove the wrench before turning on the lathe. Remove the wrench
before turning on the lathe. Remove the wrench before turning on the
lathe.....
I found it. It can fly but it can not hide (very long)
fukinnnnnnnn A

yep..... u it got to da point ........real quick ......as most folk may say

mucho gracias Amigo

Fud

Or the Tommy bar from the chuck....

"Darrell Feltmate" wrote in message
news:Ajgkd.136130$df2.46964@edtnps89...
My bowl lathe uses a wrench to hold the spindle while undoing the face
plate. Remove the wrench before turning on the lathe. Remove the wrench
before turning on the lathe. Remove the wrench before turning on the
lathe.....
I found it. It can fly but it can not hide (very long)
--

My lathe has a swivel head, don't forget to lock down the head after you swivel
it into a new position....when you restart it like this, bamb, what a bad
surprise.
Glenn Hodges
Nashville, GA

On Wed, 10 Nov 2004 03:56:16 GMT, Darrell Feltmate wrote:
My bowl lathe uses a wrench to hold the spindle while undoing the face
plate. Remove the wrench before turning on the lathe. Remove the wrench
before turning on the lathe. Remove the wrench before turning on the
lathe.....

Did you know that metalworking lathes have more torque?

Dave "no reason, just sayin... (DUCK!)" Hinz

On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:

especially if the switch was inadvertently turned on while the
machine was unplugged.

No-volt release switches ! Europe might be full of Evil Socialist
Nannies and free nurses, but we do use the right sort of switches.

On Tue, 09 Nov 2004 17:52:55 +0000, Andy Dingley
wrote:


No-volt release switches ! Europe might be full of Evil Socialist
Nannies and free nurses, but we do use the right sort of switches.
Let's talk about those 'free' nurses...

TWS

"RonB" wrote in message
news:8r6kd.99348$tU4.20754@okepread06...
I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Can you hear me now?
SH

Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh

So what was your time in the twenty?

"Eric Johnson" wrote in message
...
Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh

http://www.doitbestcorp.com/racing/

http://www.monashee.com/recreation/expo.html



"Eric Johnson" wrote in message
...
Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh

You know, there are some guys around that race those things............Barry


"Eric Johnson" wrote in message
...
Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh

They's fast, ain't they? Good think it was only a 20' cord!

(At least that's what I've "heard".)

"Eric Johnson" wrote in message ...
Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh

Gosh. After these posts - I feel better. I thought I was the only one who
did things like this!

By the way, the phone survived in fine shape with a few sander scuffs.
After some sanding in place on the belt it shot it up against the stop, flew
up into the air, bounced off of a wire frame shelf and almost landed in my
hand. No, I am not that coordinated. Just lucky.

Ron that's the reason I have a safety on my lathe that if the power has
been interrupted in any which way it will not start up if you would plug
it back in or turn it back on while it is in forward of reverse mode, I
have to turn of the power switch then set the lathe switch to neutral
and then turn the power back on, seems awkward but it done quick and it
is safe that way.
No I do not have that on my sander, I don't have or want a cell or porta
phone, when I'm turning I don't answer phones, LOML will do that and if
it ever is for me I do get informed, (they can never leave me alone (G)

Have fun and take care
Leo Van Der Loo

http://homepage.mac.com/l.vanderloo/PhotoAlbum12.html


RonB wrote:
I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!

When using your forearm to wind up an extension cord, slow
down for the last couple of feet.

UA100

In article ,
Unisaw A100 wrote:

When using your forearm to wind up an extension cord, slow
down for the last couple of feet.

high lilting voice Been there; Done that./high lilting voice

--
Owen Lowe and his Fly-by-Night Copper Company
____

"Sure we'll have fascism in America, but it'll come disguised
as 100% Americanism." -- Huey P. Long

Owen Lowe:
high lilting voice Been there; Done that./high lilting voice

Yahbut, was it said whilst bending over or whilst on your
knees?

UA100, who wonders why you never see these tips in the
magazines...

Unisaw A100 wrote in
:

Owen Lowe:
high lilting voice Been there; Done that./high lilting voice

Yahbut, was it said whilst bending over or whilst on your
knees?

UA100, who wonders why you never see these tips in the
magazines...


That's what editors are for. They don't want to send you the $35.

On Wed, 10 Nov 2004 00:46:04 GMT, Unisaw A100
wrote:

When using your forearm to wind up an extension cord, slow
down for the last couple of feet.

UA100



--zzzing---

THWAP!


OWWWWWW!

On Wed, 10 Nov 2004 00:46:04 GMT, Unisaw A100
wrote:

When using your forearm to wind up an extension cord, slow
down for the last couple of feet.

Be sure to adhere EXTRA-rigidly to this rule when winding up the cord
on the hair dryer after showering...particularly if the towel around
your waist isn't snugged up tight (or is absent!).


--
Chuck *#:^)
chaz3913(AT)yahoo(DOT)com
Anti-spam sig: please remove "NO SPAM" from e-mail address to reply.


September 11, 2001 - Never Forget


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---

Chuck wrote:
Be sure to adhere EXTRA-rigidly to this rule when winding up the cord
on the hair dryer after showering...particularly if the towel around
your waist isn't snugged up tight (or is absent!).

A hair dryer? Is this a neener?

Dave in fairfax (who doesn't need no steenkin' hair dryer)
--
Dave Leader
reply-to doesn't work
use:
daveldr at att dot net
American Association of Woodturners
http://www.woodturner.org
Capital Area Woodturners
http://www.capwoodturners.org/
PATINA
http://www.Patinatools.org/

On Sat, 13 Nov 2004 00:22:19 GMT, Dave in Fairfax
wrote:

Chuck wrote:
Be sure to adhere EXTRA-rigidly to this rule when winding up the cord
on the hair dryer after showering...particularly if the towel around
your waist isn't snugged up tight (or is absent!).

A hair dryer? Is this a neener?

Huh?

Dave in fairfax (who doesn't need no steenkin' hair dryer)

Sorry to hear that you're follically challenged.

--
Chuck *#:^)
chaz3913(AT)yahoo(DOT)com
Anti-spam sig: please remove "NO SPAM" from e-mail address to reply.


September 11, 2001 - Never Forget


----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==----
http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups
---= East/West-Coast Server Farms - Total Privacy via Encryption =---

Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it.

Well, it makes setup real difficult and doesn't leave a good edge.

toller wrote:
Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it.

Well, it makes setup real difficult and doesn't leave a good edge.


The slot cutting bit for a router will cut, but it smokes a lot
and smells like burnt wood:-)
Joe

On Wed, 10 Nov 2004 08:06:31 -0500, Joe Gorman
wrote:

toller wrote:
Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it.

Well, it makes setup real difficult and doesn't leave a good edge.


The slot cutting bit for a router will cut, but it smokes a lot
and smells like burnt wood:-)
Joe

Same for a straight-cutting shaper bit.

On Wed, 10 Nov 2004 21:09:38 -0700, Mark & Juanita
wrote:

On Wed, 10 Nov 2004 08:06:31 -0500, Joe Gorman
wrote:

toller wrote:
Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it.

Well, it makes setup real difficult and doesn't leave a good edge.


The slot cutting bit for a router will cut, but it smokes a lot
and smells like burnt wood:-)
Joe

Same for a straight-cutting shaper bit.

RAS blades take a long time to cut when you ignore the arrow and mount
them the way they'd go on a table saw..
(but for a new table, the cut the fence real good)

On Wed, 10 Nov 2004 01:18:13 GMT, "toller" wrote:

Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it.

Well, it makes setup real difficult and doesn't leave a good edge.


BTDT...burnished the plank to death...

Peter Teubel
Milford, MA
http://www.revolutionary-turners.com

On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:

I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!


Speaking hypothetically of course, if one were, hypothetically to
hypothetically do such a thing, what, hypothetically would happen?

Hypothetically, of course.

Speaking hypothetically of course, if one were, hypothetically to
hypothetically do such a thing, what, hypothetically would happen?

Hypothetically, of course.

Noted in previous post......... the phone survived in fine shape with a few
sander scuffs.
After some sanding in place on the belt it shot it up against the stop, flew
up into the air, bounced off of a wire frame shelf and almost landed in my
hand. No, I am not that coordinated. Just lucky.

Mark & Juanita wrote in message . ..
On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:

I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!


Speaking hypothetically of course, if one were, hypothetically to
hypothetically do such a thing, what, hypothetically would happen?

Hypothetically, of course.

I have NEVER unwound only 30' of a 100' extension cord reel and
plugged in a chain saw and then wondered 20 minutes later where the
smell of burning rubber was coming from - after the first time.

FoggyTown

My father years ago was cutting wood with a power saw, all of a sudden
the saw stopped, he turned round to blast us kids when he noticed that
the power cord of the saw was about 4 inches long.
How the hell he didn't get fried we have no idea because this was
about 81 and the saw was a metail bodied beast.
Cheers
Paul


On 10 Nov 2004 09:13:31 -0800, (Mike Girouard)
wrote:

Mark & Juanita wrote in message . ..
On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:

I am sure I am not the only one who carries a portable phone handset to the
garage shop.

I recommend not laying the handset on the belt of your belt/disk sander
station - especially if the switch was inadvertently turned on while the
machine was unplugged.

Just a thought. No particular reason.

Damn!


Speaking hypothetically of course, if one were, hypothetically to
hypothetically do such a thing, what, hypothetically would happen?

Hypothetically, of course.

I have NEVER unwound only 30' of a 100' extension cord reel and
plugged in a chain saw and then wondered 20 minutes later where the
smell of burning rubber was coming from - after the first time.

FoggyTown



Unless otherwise stated all references to location refer to Western Australia

On Thu, 11 Nov 2004 13:06:31 +0800, Paulco
wrote:

the power cord of the saw was about 4 inches long.

I think we can guess what happened to that !


Some friends of mine asked me to repair their handheld planer a while
back. They're hippies and are scared of this new-fangled electrickery
business. Apart from the fatal "bite", the cable for the planer had
at least six oval scoops missing from it, two of them wrapped in brown
parcel tape.

--
Smert' spamionam

I dropped a generous glob of Nitromors (Paint remover) on my lap. When the
chemical eventually reached my crown jewels there was no time for
contemplation. I rushed headlong straightaway into the kitchen, dropped my
Jeans and y-fronts, splashed my bare burning privates with water. Such
relief. As the agony subsided I realised I had a spectator. The local
spinster lady was standing in the road, both hands full of shopping bags,
mouth agape.

Jim the Limp


"Andy Dingley" wrote in message
...
On Thu, 11 Nov 2004 13:06:31 +0800, Paulco
wrote:

the power cord of the saw was about 4 inches long.

I think we can guess what happened to that !


Some friends of mine asked me to repair their handheld planer a while
back. They're hippies and are scared of this new-fangled electrickery
business. Apart from the fatal "bite", the cable for the planer had
at least six oval scoops missing from it, two of them wrapped in brown
parcel tape.

--
Smert' spamionam

Paulco wrote in message . ..
My father years ago was cutting wood with a power saw, all of a sudden
the saw stopped, he turned round to blast us kids when he noticed that
the power cord of the saw was about 4 inches long.
How the hell he didn't get fried we have no idea because this was
about 81 and the saw was a metail bodied beast.
Cheers
Paul

hey, I've done that to the extension cord on the hedge trimmers a couple of times

Dave Hall

On 11 Nov 2004 12:34:58 -0800, (David Hall)
wrote:

Paulco wrote in message . ..
My father years ago was cutting wood with a power saw, all of a sudden
the saw stopped, he turned round to blast us kids when he noticed that
the power cord of the saw was about 4 inches long.
How the hell he didn't get fried we have no idea because this was
about 81 and the saw was a metail bodied beast.
Cheers
Paul

hey, I've done that to the extension cord on the hedge trimmers a couple of times

Dave Hall

Dave, I did that so often when I had the orange monster (B&D electric
hedge eater) that I ended up buying 6 feet of auto heater hose and
giving the cord a "suit of armor"..