|
Today's Hint - Don't do things like this
I am sure I am not the only one who carries a portable phone handset to the
garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Damn! |
"RonB" wrote in message news:8r6kd.99348$tU4.20754@okepread06... I am sure I am not the only one who carries a portable phone handset to the garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Damn! I know a person (very well, in fact) who did the same trick with one of those divided boxes filled with different sizes of woodscrews. This person was very upset. Billh |
On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:
especially if the switch was inadvertently turned on while the machine was unplugged. No-volt release switches ! Europe might be full of Evil Socialist Nannies and free nurses, but we do use the right sort of switches. |
"RonB" wrote in message news:8r6kd.99348$tU4.20754@okepread06... I am sure I am not the only one who carries a portable phone handset to the garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Can you hear me now? SH |
On Tue, 09 Nov 2004 17:52:55 +0000, Andy Dingley
wrote: No-volt release switches ! Europe might be full of Evil Socialist Nannies and free nurses, but we do use the right sort of switches. Let's talk about those 'free' nurses... TWS |
billh wrote:
I know a person (very well, in fact) who did the same trick with one of those divided boxes filled with different sizes of woodscrews. This person was very upset. LOL! Pop rivets! -- Michael McIntyre ---- Silvan Linux fanatic, and certified Geek; registered Linux user #243621 http://www.geocities.com/Paris/Rue/5407/ http://rosegarden.sourceforge.net/tutorial/ |
Hmm reminds of a time I plugged in the belt sander (hand) and it was still
in the locked on position and was on a 20' extension cord... Duh |
So what was your time in the twenty?
"Eric Johnson" wrote in message ... Hmm reminds of a time I plugged in the belt sander (hand) and it was still in the locked on position and was on a 20' extension cord... Duh |
Gosh. After these posts - I feel better. I thought I was the only one who
did things like this! By the way, the phone survived in fine shape with a few sander scuffs. After some sanding in place on the belt it shot it up against the stop, flew up into the air, bounced off of a wire frame shelf and almost landed in my hand. No, I am not that coordinated. Just lucky. |
http://www.doitbestcorp.com/racing/
http://www.monashee.com/recreation/expo.html "Eric Johnson" wrote in message ... Hmm reminds of a time I plugged in the belt sander (hand) and it was still in the locked on position and was on a 20' extension cord... Duh |
Ron that's the reason I have a safety on my lathe that if the power has been interrupted in any which way it will not start up if you would plug it back in or turn it back on while it is in forward of reverse mode, I have to turn of the power switch then set the lathe switch to neutral and then turn the power back on, seems awkward but it done quick and it is safe that way. No I do not have that on my sander, I don't have or want a cell or porta phone, when I'm turning I don't answer phones, LOML will do that and if it ever is for me I do get informed, (they can never leave me alone (G) Have fun and take care Leo Van Der Loo http://homepage.mac.com/l.vanderloo/PhotoAlbum12.html RonB wrote: I am sure I am not the only one who carries a portable phone handset to the garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Damn! |
When using your forearm to wind up an extension cord, slow
down for the last couple of feet. UA100 |
You know, there are some guys around that race those things............Barry
"Eric Johnson" wrote in message ... Hmm reminds of a time I plugged in the belt sander (hand) and it was still in the locked on position and was on a 20' extension cord... Duh |
On Tue, 9 Nov 2004 12:04:41 -0500, "billh"
wrote: This person was very upset. Not to mention the screws. -- Chuck *#:^) chaz3913(AT)yahoo(DOT)com Anti-spam sig: please remove "NO SPAM" from e-mail address to reply. September 11, 2001 - Never Forget ----== Posted via Newsfeeds.Com - Unlimited-Uncensored-Secure Usenet News==---- http://www.newsfeeds.com The #1 Newsgroup Service in the World! 100,000 Newsgroups ---= East/West-Coast Server Farms - Total Privacy via Encryption =--- |
Every wonder what would happen if you put your jointer knives in backwards,
but were too timid to try it. Well, it makes setup real difficult and doesn't leave a good edge. |
My bowl lathe uses a wrench to hold the spindle while undoing the face
plate. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe..... I found it. It can fly but it can not hide (very long) -- God bless and safe turning Darrell Feltmate Truro, NS Canada www.aroundthewoods.com |
On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote:
I am sure I am not the only one who carries a portable phone handset to the garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Damn! Speaking hypothetically of course, if one were, hypothetically to hypothetically do such a thing, what, hypothetically would happen? Hypothetically, of course. |
Darrell Feltmate wrote:
My bowl lathe uses a wrench to hold the spindle while undoing the face plate. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe..... I found it. It can fly but it can not hide (very long) fukinnnnnnnn A yep..... u it got to da point ........real quick ......as most folk may say mucho gracias Amigo Fud |
In article ,
Unisaw A100 wrote: When using your forearm to wind up an extension cord, slow down for the last couple of feet. high lilting voice Been there; Done that./high lilting voice -- Owen Lowe and his Fly-by-Night Copper Company ____ "Sure we'll have fascism in America, but it'll come disguised as 100% Americanism." -- Huey P. Long |
Owen Lowe:
high lilting voice Been there; Done that./high lilting voice Yahbut, was it said whilst bending over or whilst on your knees? UA100, who wonders why you never see these tips in the magazines... |
Or the Tommy bar from the chuck....
"Darrell Feltmate" wrote in message news:Ajgkd.136130$df2.46964@edtnps89... My bowl lathe uses a wrench to hold the spindle while undoing the face plate. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe..... I found it. It can fly but it can not hide (very long) -- |
toller wrote:
Every wonder what would happen if you put your jointer knives in backwards, but were too timid to try it. Well, it makes setup real difficult and doesn't leave a good edge. The slot cutting bit for a router will cut, but it smokes a lot and smells like burnt wood:-) Joe |
Speaking hypothetically of course, if one were, hypothetically to
hypothetically do such a thing, what, hypothetically would happen? Hypothetically, of course. Noted in previous post......... the phone survived in fine shape with a few sander scuffs. After some sanding in place on the belt it shot it up against the stop, flew up into the air, bounced off of a wire frame shelf and almost landed in my hand. No, I am not that coordinated. Just lucky. |
My lathe has a swivel head, don't forget to lock down the head after you swivel
it into a new position....when you restart it like this, bamb, what a bad surprise. Glenn Hodges Nashville, GA |
Chuck keys left in the chuck will fly and hide forever.
Don't ask! -- Richard, Richard L. Rombold WIZARD WOODWORKING 489 N. 32nd. St. Springfield, Or .97478 http://www.PictureTrail.com/gallery/...ername=thewizz "Do not meddle in the affairs of Dragons, for thou art crunchy and taste good with ketchup" |
On Wed, 10 Nov 2004 03:56:16 GMT, Darrell Feltmate wrote:
My bowl lathe uses a wrench to hold the spindle while undoing the face plate. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe. Remove the wrench before turning on the lathe..... Did you know that metalworking lathes have more torque? Dave "no reason, just sayin... (DUCK!)" Hinz |
Unisaw A100 wrote in
: Owen Lowe: high lilting voice Been there; Done that./high lilting voice Yahbut, was it said whilst bending over or whilst on your knees? UA100, who wonders why you never see these tips in the magazines... That's what editors are for. They don't want to send you the $35. |
Mark & Juanita wrote in message . ..
On Tue, 9 Nov 2004 10:41:40 -0600, "RonB" wrote: I am sure I am not the only one who carries a portable phone handset to the garage shop. I recommend not laying the handset on the belt of your belt/disk sander station - especially if the switch was inadvertently turned on while the machine was unplugged. Just a thought. No particular reason. Damn! Speaking hypothetically of course, if one were, hypothetically to hypothetically do such a thing, what, hypothetically would happen? Hypothetically, of course. I have NEVER unwound only 30' of a 100' extension cord reel and plugged in a chain saw and then wondered 20 minutes later where the smell of burning rubber was coming from - after the first time. FoggyTown |
One of the first things I did at school - self-ejecting keys.
"Richard L." wrote in message ... Chuck keys left in the chuck will fly and hide forever. Don't ask! -- Richard, Richard L. Rombold WIZARD WOODWORKING 489 N. 32nd. St. Springfield, Or .97478 http://www.PictureTrail.com/gallery/...ername=thewizz "Do not meddle in the affairs of Dragons, for thou art crunchy and taste good with ketchup" |
On Wed, 10 Nov 2004 00:46:04 GMT, Unisaw A100
wrote: When using your forearm to wind up an extension cord, slow down for the last couple of feet. UA100 --zzzing--- THWAP! OWWWWWW! |
On Wed, 10 Nov 2004 07:22:09 -0800, "Richard L."
wrote: Chuck keys left in the chuck will fly and hide forever. Well of course they will. After being hurt like that, they're as skittish as cats but don't need to compromise because they don't need to be fed. Don't ask! |
On Wed, 10 Nov 2004 08:06:31 -0500, Joe Gorman
wrote: toller wrote: Every wonder what would happen if you put your jointer knives in backwards, but were too timid to try it. Well, it makes setup real difficult and doesn't leave a good edge. The slot cutting bit for a router will cut, but it smokes a lot and smells like burnt wood:-) Joe Same for a straight-cutting shaper bit. |
lol
the solution for chuck keys, wrenches, etc is to always hold them in your hand - if you don't let go until it's removed from the tool, you won't start the tool with the wrench attached. (works for me) the one that is harmless but always makes me jump is when I'm changing sandpaper on a jitterbug with the air pressure still on and it starts up on me.... "Mark & Juanita" wrote in message ... On Wed, 10 Nov 2004 07:22:09 -0800, "Richard L." wrote: Chuck keys left in the chuck will fly and hide forever. Well of course they will. After being hurt like that, they're as skittish as cats but don't need to compromise because they don't need to be fed. Don't ask! |
On Wed, 10 Nov 2004 21:09:38 -0700, Mark & Juanita
wrote: On Wed, 10 Nov 2004 08:06:31 -0500, Joe Gorman wrote: toller wrote: Every wonder what would happen if you put your jointer knives in backwards, but were too timid to try it. Well, it makes setup real difficult and doesn't leave a good edge. The slot cutting bit for a router will cut, but it smokes a lot and smells like burnt wood:-) Joe Same for a straight-cutting shaper bit. RAS blades take a long time to cut when you ignore the arrow and mount them the way they'd go on a table saw.. (but for a new table, the cut the fence real good) |
On Thu, 11 Nov 2004 13:06:31 +0800, Paulco
wrote: the power cord of the saw was about 4 inches long. I think we can guess what happened to that ! Some friends of mine asked me to repair their handheld planer a while back. They're hippies and are scared of this new-fangled electrickery business. Apart from the fatal "bite", the cable for the planer had at least six oval scoops missing from it, two of them wrapped in brown parcel tape. -- Smert' spamionam |
In article 1100152319.+ODWFtGYKWZOSjgiq4V29w@teranews, "william_b_noble" wrote:
lol the solution for chuck keys, wrenches, etc is to always hold them in your hand - if you don't let go until it's removed from the tool, you won't start the tool with the wrench attached. (works for me) That's only half the solution. The other half is to make sure you put it down in the same place every time, so you know where it is the next time you need it. -- Regards, Doug Miller (alphageek-at-milmac-dot-com) Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter by sending email to autoresponder at filterinfo-at-milmac-dot-com You must use your REAL email address to get a response. |
They make these nifty things for less than a buck which allow you to connect
the key to a cord. Or not, which I guess is why they're International Orange. "Doug Miller" wrote in message . com... In article 1100152319.+ODWFtGYKWZOSjgiq4V29w@teranews, "william_b_noble" wrote: lol the solution for chuck keys, wrenches, etc is to always hold them in your hand - if you don't let go until it's removed from the tool, you won't start the tool with the wrench attached. (works for me) That's only half the solution. The other half is to make sure you put it down in the same place every time, so you know where it is the next time you need it. -- Regards, Doug Miller (alphageek-at-milmac-dot-com) Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter by sending email to autoresponder at filterinfo-at-milmac-dot-com You must use your REAL email address to get a response. |
In article , "George" george@least wrote:
They make these nifty things for less than a buck which allow you to connect the key to a cord. Or not, which I guess is why they're International Orange. Not always practical on a drill press, though. I've never had problems losing the chuck keys for my portable drills, but I had a hard time keeping track of the drill press key until I bought one of these: http://www.leevalley.com/wood/page. asp?SID=&ccurrency=2&page=41734&category=1,42363,4 2356 -- Regards, Doug Miller (alphageek-at-milmac-dot-com) Get a copy of my NEW AND IMPROVED TrollFilter for NewsProxy/Nfilter by sending email to autoresponder at filterinfo-at-milmac-dot-com You must use your REAL email address to get a response. |
I dropped a generous glob of Nitromors (Paint remover) on my lap. When the
chemical eventually reached my crown jewels there was no time for contemplation. I rushed headlong straightaway into the kitchen, dropped my Jeans and y-fronts, splashed my bare burning privates with water. Such relief. As the agony subsided I realised I had a spectator. The local spinster lady was standing in the road, both hands full of shopping bags, mouth agape. Jim the Limp "Andy Dingley" wrote in message ... On Thu, 11 Nov 2004 13:06:31 +0800, Paulco wrote: the power cord of the saw was about 4 inches long. I think we can guess what happened to that ! Some friends of mine asked me to repair their handheld planer a while back. They're hippies and are scared of this new-fangled electrickery business. Apart from the fatal "bite", the cable for the planer had at least six oval scoops missing from it, two of them wrapped in brown parcel tape. -- Smert' spamionam |
| All times are GMT +1. The time now is 02:24 PM. |
Powered by vBulletin® Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Copyright ©2004 - 2014 DIYbanter